- Home
- Models
- Metropolitan 540
Metropolitan 540
Air Baffle – Center Support For Metropolitan
Air baffle radiator, center support (used); Fits: All Metropolitans
QTY Required: 1
Air Cleaner Assembly For Early Metropolitan
Air cleaner oil bath assembly (used), limitied availability. Fits: 540 Metropolitans
Note: Use about 1 cup of 30 weight oil.
QTY Required: 1
Ashtray Assembly Airflyte Lined For Metropolitan
Ashtray assembly with Airflyte lined lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back Plate, Front Right For Metropolitan Brakes
Back plate, front right (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back Plate, Rear Right For EARLY Metropolitan Brakes
Back plate, rear right (used -limited supply) Fits: Chassis # E1001 – E29283
QTY Required: 1
Ball Journal Bearing For Metropolitan
Bearing, ball journal; Fits: to Chassis #E11000
QTY Required: 1
Battery Hold Down Bracket For Metropolitan
Hold down bracket for battery; Fits: All Metropolitans
QTY Required: 1
Brake Master Cylinder For Metropolitan
Master brake cylinder, 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Brake Pipe, Cylinder to Cylinder, Metropolitan Brakes
Brake line pipe, wheel cylinder to wheel cylinder, front brakes; Fits: All Metropolitans
QTY Required: 2
Carburettor, C-1386 Rebuilt For 1G Engine Prefix Metropolitan
Carburettor, C-1386 (X 175) Rebuilt carburettor with new throttle shaft, bushings, jets and float. Ready-to-ship. Fits: 1G Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Castrol Dot 4 Brake Fluid
CASTROL DOT 4 Brake Fluid, 12 oz.
NOTE: USE ONLY CASTROL DOT 4 BRAKE FLUID!
The seals & hoses in your brake system are made from natural rubber which is only compatible with vegetable based brake fluid. Castrol DOT 4 is the only fluid generally available in the United States. Use of improper or mixing of fluids can lead to complete brake failure. Fits: Most British Vehicle except Rolls Royce/Bentley
QTY Required: 4
Clutch Cover Assembly For 1G Engine Prefix Metropolitan
Rebuilt clutch cover assembly (X100).Price includes $100 core charge and will be refunded when KMC receives your rebuildable core. Fits: 1G prefix Met Engine
QTY Required: 1
Cowl Ventilator Assembly For Metropolitan Weather Eye
Cowl vent assembly (used); Fits: All Metropolitans
QTY Required: 1
Cylinder Block Front Cover For 1G Engine Prefix Metropolitan
Front cover (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Cylinder Head Rebuilt Assembly For 1G Engine Prefix Metropolitan
Cylinder head assembly (X650)
A rebuilt cylinder head assembly includes all components shown in photograph.
A core charge of $650 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on machining. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For 1 G prefix engines.
QTY Required: 1
Differential Assembly 8/37 Ratio Rebuild For Metropolitan
Differential assembly, 8/37 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core. Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Door Glass For Metropolitan
Glass, door *Fragile surcharge of $85 will be added to shipping, please see shipping details. ; Fits: All Metropolitans with NO vent window
QTY Required: 2
Drive Shaft Assembly Rebuild For Metropolitan
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # to E11000
QTY Required: 1
Engine Assembly Rebuild For 1G Engine Prefix Metropolitan
1G Prefix Engine Assembly Rebuild (X600) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on the condition of the engine and the backlog. Additional crate charge for shipment and shipped via motor freight. Click here for details on our engine building process.
QTY Required: 1
Exhaust Manifold For 1G Engine Prefix Metropolitan
Exhaust manifold (used); Fits: to Chassis # E11000
QTY Required: 1
Front Bumper Re-Chrome For Metropolitan
Front bumper ,(X) Send in your front bumper so we can repair, strip and then re-chrome. Depending on condition, there maybe an additional surcharge for repairs. At times, we do have a cores. Please inquire; Fits: All Metropolitans
QTY Required: 1
Fuel Pump Rebuild For 1G Engine Prefix Metropolitan
Fuel pump (X) ; Fits Chassis # to E11000. Please send in your fuel pump for rebuilding. Sorry no decent cores available. Please empty all fluids and wrap in plastic before packaging.
QTY Required: 1
Fuel Tank Refurbishment For Metropolitan
Fuel tank (X) Please send in your tank for refurbishing, sorry no cores are available. Tank is drained, cleaned and evaluated. Some tanks are rusting from the inside out so we cut them in half, scrap out the rust; treat and seal. Once dry, we make any repairs to exterior and plug up any pin holes. Weld two halves back together, sandblast exterior, prime and paint black. There may be additional charge depending on the condition of the tank. Refurbished tanks are far superior to any ‘conversion’ tank as those do not fit well and are not sealed on the inside.
QTY Required: 1
Gearbox Rebuild For 1G Engine Prefix Metropolitan
Gearbox (X295); Fits: to Chassis # E11000. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core.TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Gearshift Lever For Metropolitan
Shift lever (X) Please send in your shift lever to be rebuilt. Sorry, no cores available. Fits: All Metropolitans
QTY Required: 1
Generator #22258 Rebuild For Metropolitan
Generator – 22258 (X175) Price includes a $175 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge. Fits: 540/560 Metropoltans
QTY Required: 1
Handbrake Lever Assembly For Metropolitan
Handbrake lever assembly (X) Please send in your handbrake assembly to be refurbished. No cores available.
QTY Required: 1
Headlamp Assembly For Metropolitan
Headlamp assembly, includes sealed beam headlight assembly, gaskets, and headlamp door (rim); Fits: All Metropolitans
QTY Required: 2
Jack BMC New-Old-Stock For Metropolitan
Jack NOS still wrapped in BMC branded wax paper. Handle sold separately. Fits: All Metropolitans
QTY Required: 1
Metropolitan Chassis Serial # Plate
Chassis serial # plate. Authentic reproduction. Please let us know your Chassis number (starts with an “E”) and we’ll stamp plate.
QTY Required: 1
Metropolitan Factory Parts Catalog
Factory Parts catalog; photocopied and plastic comb bound with card stock cover. Features exploded views for Series I, II, III, and IV Metropolitan. US Version.
QTY Required: 1
Mirror – Rear View For Metropolitan
Rear view mirror with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Oil Pump For 1G Engine Prefix Metropolitan
Oil pump (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core. ; Fits: to Chassis # E11000
QTY Required: 1
Panel Kit For Early Convertible Metropolitan
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in beige automotive vinyl); clips and screws required for one car. Click here for details and photos. Fits: 541 Convertible. Custom kits available – please inquire. Made by Kip Motor Company. Oversize shipping surcharge.
QTY Required: 1
Piston Set, Standard; Includes Rings And Pins. For Metropolitan
Piston set, standard; includes rings and pins. Fits: 1G engine prefix
QTY Required: 1
Radiator For Early Metropolitan
Radiator (X65) re-cored and painted. Price includes a $45 core charge that is refunded once we receive your rebuildable core. May incurr an oversize shipping fee. Fits: 540 Metropolitans
QTY Required: 1
Radio Rebuild For Metropolitan
RADIO (X) Please send in your radio for rebuilding to oringal AM specifications. Allow 3-4 weeks. Fits: All Metropolitans
QTY Required: 1
Rear Bumper Re-Chrome For Metropolitan
Rear bumper, re-chrome (X). Send in your bumper for repair and re-chroming. Depening on condition, there maybe an additional charge for repairs and stripping; Fits: All Metropolitans
QTY Required: 1
Rear Window Glass 3 Piece – Center For Metropolitan
Glass, 3 pc center (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Shock Absorber – Front For Metropolitan
Shock absorber, front with mounting hardware; Fits: All Metropolitans
QTY Required: 2
Starter Rebuild For Metropolitan
Starter (X) Please send in your core to be rebuilt, 1-2 week turnaround. ; Fits: All Metropolitans
QTY Required: 1
Steering Box Assembly Rebuild For Metropolitan
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Tail Lamp Rebuild Assembly For Metropolitan
Tail lamp assembly (X) Sorry, no cores available; please send in your assembly to be refurbished. Tail lens, gasket, bulbs, and wiring are replaced. Fits: All Metropolitans
QTY Required: 2
Upholstery Kit For EARLY Metropolitan
Upholstery kit EARLY MET – BEDFORD CORD STRIPE as original from the factory. (Kit contains front seat backs, front seat bottom, rear seat back, rear seat cushion and wheelhouse covers. Made-to-order, please allow 2 week production time. Custom kits available. Instructions are included. Pig rings are used to attach the upholstery to the seat frame and are installed using special ‘hog ring’ pliers. Please use new padding kit, 811 PAD, in conjunction with this kit. Click here for details. Fits: 540 Metropolitans; Oversize shipping surcharge.
QTY Required: 1
Water Pump Rebuild For Early Metropolitan
Water pump (X) Please send in your pump to be rebuilt. Sorry, no cores available. Fits: Chassis # to E10998
QTY Required: 1
Windshield Glass For Metropolitan
Glass, windshield *Crate surcharge of $85 is included in the price. Please see shipping note.
QTY Required: 1
Wiper Motor Rebuild For Metropolitan
Wiper motor (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Air Baffle – Left For Metropolitan
Air baffle radiator, left (used); Fits: All Metropolitans
QTY Required: 1
Ashtray Assembly Airflyte Pebble For Metropolitan
Ashtray assembly with Airflyte pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Ball Journal Bearing For Metropolitan
Bearing, ball journal; Fits: Chassis #E11001 –
QTY Required: 1
Brake Hose, Front For Metropolitan Brakes
Brake hose, flexible, front brakes; Fits: All Metropolitans
QTY Required: 2
Cable Battery to Starter Switch For Metropolitan
Cable, battery negative to starter switch with lug and eyelets
QTY Required: 1
Carburettor, C-1466 Rebuilt For 2G Engine Prefix Metropolitan
Carburettor, C-1466 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: 2G Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Castrol Dot 4 Brake Fluid Qt
Brake fluid CASTROL DOT 4, QT
NOTE: USE ONLY CASTROL DOT 4 BRAKE FLUID!
The seals & hoses in your brake system are made from natural rubber which is only compatible with vegetable based brake fluid. Castrol DOT 4 is the only vegetable based fluid generally available in the United States. Use of improper or mixing of fluids can lead to complete brake failure.; Fits: Most British Vehicles except Rolls Royce/Bentley
QTY Required: 1
Clip For Retaining Bonnet Safety Catch, Metropolitan
Clip, retaining bonnet safety catch; Fits: All Metropolitans
QTY Required: 1
Clutch Cover Assembly For 2G Engine Prefix Metropolitan
Rebuilt clutch cover assembly (X100).Price includes $100 core charge and will be refunded when KMC receives your rebuildable core. Fits: 2G prefix Met Engine
QTY Required: 1
Cowl Ventilator SCREEN For Metropolitan Weather Eye
Screen for ventilator ; Fits: All Metropolitans
QTY Required: 1
Cylinder Block Front Cover For Metropolitan Engines
Front cover (used) sandblasted; Fits: Chassis # E11001 –
QTY Required: 1
Cylinder Head Rebuilt Assembly For 2G Engine Prefix Metropolitan
Cylinder head assembly (X395)
A rebuilt cylinder head assembly that includes all components shown in photograph.
A core charge of $395 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on que. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For 2G prefix engines.
QTY Required: 1
Differential Assembly 9/41 Ratio Rebuild For Metropolitan
Differential assembly, 9/41 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core.Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Drive Shaft Assembly Rebuild For Metropolitan
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E11000 – E28705
QTY Required: 1
Engine Assembly Rebuild For 2G Engine Prefix Metropolitan
2 G Prefix Engine Assembly (X300) – A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on block condition block and production backlog. There is an additional crate charge for motor freight shipment.
QTY Required: 1
Front Bumper Chrome Overrider For Metropolitan
Overrider, chrome; Fits: All Metropolitans
QTY Required: 4
Fuel Pump Rebuild For Metropolitan
Fuel pump (X); Fits: Chassis # E11001 -. Sorry, no decent cores available; please send in your pump for rebuilding. Please empty out all fluids, wap in plastic before packagin.
QTY Required: 1
Gearbox Rebuild For Metropolitan
Gearbox (X295); Fits: Chassis # E11001 – E27904. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Gearshift Pivot Pin For Metropolitan
Pivot pin to operating shaft yoke; Fits: All Metropolitans
QTY Required: 1
Handbrake Connector For Metropolitan
Connector for handbrake; Fits: All Metropolitans
QTY Required: 1
Jack Handle For Metropolitan
Jack handle, metal made by KMC to fit the BMC jack. Fits: All Metropolitans
QTY Required: 1
Metropolitan Body # Plate
Body # plate. Authentic reproduction. Please let us know your body number to stamp on plate in order comments.
QTY Required: 1
Metropolitan Technical Service Manual
Technical Service Manual – features Early Met illustrations. Photocopied and plastic comb bound with card stock cover ideal for shop use. Fits: U.S. Version Early Metropolitan, Series I & II (540)
QTY Required: 1
Mirror – Side Door Mounting For Metropolitan
Side mirror, door mounting with hardware; Fits: All Metropolitans
QTY Required: 1
Oil Pump Driving Gear For Metropolitan
Driving gear, oil pump; Fits: Chassis # E11001 –
QTY Required: 1
Panel Kit For Early Hardtop Metropolitan
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in beige automotive vinyl), clips and screws required for one car. Click here for details and photos. Fits: 542 Hardtop. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston Set, Std. 0.01 For Metropolitan
Piston set, std. 0.01; Fits: 1G engine prefix
QTY Required: 1
Rear Bumper Bracket – Right For Metropolitan
Bracket, right (used); Fits: All Metropolitans
QTY Required: 1
Rear Window Glass 3 Piece – Center For Metropolitan
Glass, 3 pc center (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Shock Absorber – Rear For Metropolitan
Shock absorber, rear with mounting hardware; Fits: All Metropolitans
QTY Required: 2
Spruce Green P903 for Early Metropolitan
Spruce Green paint is available in different types such as acrylic enamel and urethane. Please call 888-243-0440 for quote as price is determined by color, quantity and type of paint selected. Fits: Metropolitan 540
QTY Required: As Required
Starter Drive Gear For Metropolitan
Drive gear (pinion and sleeve); Fits: All Metropolitans
QTY Required: 1
Steering Box Assembly Rebuild For Metropolitan
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Tail Lamp Screw For Metropolitan
Screw, for tail light assembly to body; Fits: All Metropolitans
QTY Required: 2
Trunk (Boot) Hinge Set, Left & Right, Metropolitan
Hinge set chrome, left & right. Hand casted, sanded, then triple chromed. Made by KMC craftsmen. Fits: All Metropolitans
QTY Required: 1
Water Pump Key Hub Rebuild For Metropolitan
Water pump with key hub (X) Please send in your pump to be rebuilt. Sorry, no cores available. Fits: Chassis # E11001-
QTY Required: 1
Windshield Weatherstrip 3 Piece Trim For Metropolitan Windscreen
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the order.
QTY Required: 1
Wiper Gearbox For Metropolitan
Wiper gearbox (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Accelerator Arm For Metropolitan
Arm, acclerator (used); sandblasted and primed; Fits: Met Chassis to E10998
QTY Required: 1
Air Baffle – Lower For Metropolitan
Air baffle radiator, lower. Sorry, no longer available; Fits: All Metropolitans
QTY Required: 1
Ashtray Assembly Pebble Lid For Metropolitan
Ashtray assembly with Pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back Plate, Front Left For Metropolitan Brakes
Back plate, front left (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back Plate, Rear Left For EARLY Metropolitan Brakes
Back plate, rear left (used), sorry, no longer available. Fits: Chassis # E1001 – E29283
QTY Required: 1
Battery Box Cover For Metropolitan
Cover, battery box (used); Fits: All Metropolitans
QTY Required: 1
Brake Master Cylinder Repair Kit For Metropolitan Brakes
Repair kit for brake master cylinder 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Canyon Red P904 For Early Metropolitan
Canyon Red paint is available in different types such as acrylic enamel and urethane. Please call 888-243-0440 for quote as price is determined by color, quantity and type of paint selected. Fits: Metropolitan 540
QTY Required: As Required
Convertible Top Seal For Metropolitan
Top seal, rubber; Fits: All 541/561 Convertible Metropolitans
QTY Required: 1
Cowl Weatherstrip CLIP For Metropolitan Weather Eye
Clip, weatherstrip cowl; Fits: All Metropolitans
QTY Required: 8
Cylinder Block Front Cover Ring Felt For Metropolitan
Ring, felt front cover; Fits: All Metropolitans
QTY Required: 1
Door Glass Slide Channel For Metropolitan
Slide channel sorry, not currently available; Fits: All Metropolitans
QTY Required: 2
Door Hinge Screw For Metropolitan
Screw, hinge door and body; Fits: All Metropolitans
QTY Required: 28
Exhaust Pipe/Manifold Clamp assembly For Metropolitan
Manifold/pipe clamp assembly; Fits: Chassis # E11001 –
QTY Required: 1
Fender Joint BeadingFor Metropolitan
Beading, fender joint fits left or right fender; Fits: All Metropolitans
QTY Required: 2
Front Bumper Overrider Gasket Set For Metropolitan
Overrider gasket set (rubber); Fits: All Metropolitans
QTY Required: 1
Fuel Pump Repair Kit For Metropolitan
Repair kit, for fuel pump. Save money and rebuild your own pump! Fits: All Metropolitans
QTY Required: 1
Gearshift Knob – Black For Metropolitan
Knob, gearshift – black; Fits: All Metropolitans
QTY Required: 1
Handbrake Clevis Pin For Metropolitan
Clevis pin connector to lever; Fits: All Metropolitans
QTY Required: 3
Headlamp Dust Excluder For Metropolitan
Dust excluder, rubber; Fits: All Metropolitans
QTY Required: 2
Horn Bracket, Righthand For Metropolitan
Bracket to chassis, righthand (used); Fits: All Metropolitans
QTY Required: 1
Intake Manifold For 1G Engine Prefix Metropolitan Engine
Intake manifold (used); Fits: to Chassis # E11000
QTY Required: 1
Metropolitan Engine # Plate
Engine # plate. Authntic reproduction. Please let us know your engine # to stamp on plate.
QTY Required: 1
Mirror – Side Fender Mounting – Left hand For Metropolitan
Side mirror, fender mounting – Left hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Oil Pump Driven Gear For Metropolitan
Driven gear, oil pump; Fits: to Chassis # E11000
QTY Required: 1
Piston Set, Std. 0.02 For Metropolitan
Piston set, std. 0.02; Fits: 1G engine prefix
QTY Required: 1
Radio Knob Set For Metropolitan
Radio knob set, includes left and right, inner & outer knobs, indicator and pointer. Made by Kip Motor Company. Fits: All Metropolitans
QTY Required: 1
Rear Bumper Bracket – Left For Metropolitan
Bracket, left (used); Fits: All Metropolitans
QTY Required: 1
Rear Window Glass 3 Piece – Left For Metropolitan
Glass, 3 pc left (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Right Side Floor Mat For Metropolitan
Floor mat, right side (rubber); Fits: All Metropolitans
QTY Required: 1
Starter Bushing, Drive End For Metropolitan
Bushing drive end; Fits: All Metropolitans
QTY Required: 1
Steering Box Bushing For Metropolitan
Bushing, steering box outer column; Fits: All Metropolitans
QTY Required: 2
Tail Lamp Red Lens For Metropolitan
Tail lens, authentic reproduction by KMC artisans, red; Fits: All Metropolitans
QTY Required: 2
Tool Bag Heavy Duty For Metropolitan
Tool bag, heavy duty black vinyl with snap; Fits: All Metropolitans
QTY Required: 1
Trunk (Boot) Hinge Gasket Set For Metropolitan
Gasket set, trunk hinge; Fits: All Metropolitans
QTY Required: 1
Water Pump Press Hub For Metropolitan
Water pump with press hub; Fits: Chassis # E11001 –
QTY Required: 1
Windshield Weatherstrip 2 Piece Trim For Metropolitan Windscreen
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the item.
QTY Required: 1
Wiper Wheelbox/Cable Assembly For Metropolitan
Wiper wheelbox/cable assembly (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Accelerator Arm For Metropolitan
Arm, accelerator (used); sandblased and primed; Fits: Met Chassis # E11001-E33239
QTY Required: 1
Air Baffle – Right For Metropolitan
Air baffle radiator, right (used); Fits: All Metropolitans
QTY Required: 1
Ashtray LID Airflyte Lined For Metropolitan
Lid only, ashtray Airflyte lined, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Brake Pipe, Front Right/4-Way For Metropolitan Brakes
Brake line pipe, front RIGHT to 4-way connector; Fits: All Metropolitans
QTY Required: 1
Cable Battery to Ground For Metropolitan
Cable, battery positive to ground with lug and eyelets
QTY Required: 1
Caribbean Blue P905 For Early Metropolitan
Caribbean Blue paint is available in different types such as acrylic enamel and urethane. Please call 888-243-0440 for quote as price is determined by color, quantity and type of paint selected. Fits: Metropolitan 540
QTY Required: As Required
Convertible Top Seal Retainer For Metropolitan
Retainer for top seal; Fits: All 541/561 Convertible Metropolitans
QTY Required: 2
Cowl WEATHERSTRIP For Metropolitan Weather Eye
Weatherstrip, cowl – rubber; Fits: All Metropolitans
QTY Required: 1
Cylinder Block Front Cover Gasket For Metropolitan
Gasket, front cover to cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Door Glass Liner – Slide Channel For Metropolitan
Felt Liner, slide channel; Fits: All Metropolitans
QTY Required: 1
Exhaust Pipe/Manifold Gasket For Metropolitan
Gasket, exhaust manifold to exhaust pipe; Fits: to Chassis # E11000
QTY Required: 1
Fenderscript (Nameplate) Chrome For Metropolitan
“Metropolitan” Fenderscript. Hand casted, sanded, then triple chromed by KMC craftsmen; Fits: All Metropolitans
QTY Required: 1
Front Bumper Overrider Seating Bracket For Metropolitan
Seating bracket for overrider; Fits: All Metropolitans
QTY Required: 4
Fuel Pump Gasket For 1G Engine Prefix Metropolitan
Gasket, pump to block; Fits: Chassis # to E11000
QTY Required: 1
Fuel Tank Pickup Tube For Metropolitan
Pickup tube (X) Please send in your core to be refurbished.
QTY Required: 1
Gearshift Knob – Cream For Metropolitan
Knob, gearshift – cream; Fits: All Metropolitans
QTY Required: 1
Handbrake Cable For Metropolitan Handbrake
Cable for handbrake; Fits: All Metropolitans
QTY Required: 1
Horn Bracket, Lefthand For Metropolitan
Bracket to chassis, lefthand (used); Fits: All Metropolitans
QTY Required: 1
Intake Guide For 1G Engine Prefix Metropolitan Cylinder Head
Guide, intake; Fits: to Chassis # E11000
QTY Required: 4
Intake Manifold For Metropolitan Engines
Intake manifold (used); Fits: Chassis # E11001 –
QTY Required: 1
Left Side Floor Mat For Metropolitan
Floor mat, left side (rubber); Fits: All Metropolitans
QTY Required: 1
Metropolitan Owners Manual For Early Mets (540)
Owners Manual For Early Metropolitans, Series I & II. Color reprint of the original. For: 540 Metropolitans
QTY Required: 1
Mirror – Side Fender Mounting – Right hand For Metropolitan
Side mirror, fender mounting – Right hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Piston Set, Std. 0.03 For Metropolitan
Piston set, std. 0.03; Fits: 1G engine prefix
QTY Required: 1
Radio Left Inner Knob For Metropolitan
Radio left inner knob; Fits: All Metropolitans
QTY Required: 1
Rear Bumper Bolt For Metropolitan
Bumper bolt, to support bracket; Fits: All Metropolitans
QTY Required: 2
Rear Window Glass 3 Piece – Left For Metropolitan
Glass, 3 pc left (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Reveal Moulding Chrome – Upper Left For Metropolitan Windscreen
Reveal moulding, upper left (used)
QTY Required: 1
Spring For Safety Catch Hood Lock, Metropolitan
Spring, safety catch; Fits: All Metropolitans
QTY Required: 1
Starter Bushing, Commutator End For Metropolitan
Bushing commutator end; Fits: All Metropolitans
QTY Required: 1
Steering Box Oil Seal For Metropolitan
Oil seal, steering box outer column; Fits: All Metropolitans
QTY Required: 2
Tail Lamp Lens Gasket For Metropolitan
Gasket, lens seating (rubber); Fits: All Metropolitans
QTY Required: 2
Trunk (Boot) Prop Assembly For Metropolitan
Prop assembly, trunk lid; Fits: All Metropolitans
QTY Required: 1
Water Pump Pulley For Metropolitan 1G Engine
Pulley for water pump and fan; Fits: 1G prefix Met engine
QTY Required: 1
Wheel For Early Metropolitan
Wheel (used); Fits 540 Metropolitans
Note: 540 Metropolitans were originally equipped with 5.20 x 13 bias belted tires. This is approximately equivalent to 145/80 R13 radial tires. May incurr a heavy shipping surcharge.
QTY Required: 5
Air Baffle – Upper For Metropolitan
Air baffle radiator, upper (used); Fits: All Metropolitans
QTY Required: 1
Ashtray LID Airflyte Pebble For Metropolitan
Lid only , ashtray Airflyte pebble, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Brake Pipe, Front Left/4-Way For Metropolitan Brakes
Brake line pipe, front LEFT to 4-way connector; Fits: All Metropolitans
QTY Required: 1
Carburettor Repair Kit For Metropolitan
Carburettor Repair kit- contains all rubber parts for rebuild; Fits: All Metropolitans
QTY Required: 1
Clutch Release Plate For Metropolitan
Release plate. Sorry, not currently available. Fits: Metopolitan Chassis # E11001-
QTY Required: 1
Convertible Bolt Rear Bow For Metropolitan
Bolt, rear bow to top frame; Fits: All 541/561 Convertible Metropolitans
QTY Required: 2
Croton Green P906 For Early Metropolitan
Croton Green paint is available in different types such as acrylic enamel and urethane. Please call 888-243-0440 for quote as price is determined by color, quantity and type of paint selected. Fits: Metropolitan 540
QTY Required: As Required
Cylinder Block Front Cover Gasket For Metropolitan
Gasket, front cover to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Defroster DUCT For Metropolitan Weather Eye
Defroster duct, flexible hose; Fits: All Metropolitans
QTY Required: 2
Door Glass Liner – Vent Slide For Metropolitan
Felt Liner, vent slide; Fits: All Metropolitans
QTY Required: 2
Door Rubber Rebound For Metropolitan
Rubber rebound for check strap; Fits: All Metropolitans
QTY Required: 2
Front Bumper Bracket – Right For Metropolitan
Bracket, right (used); Fits: All Metropolitans
QTY Required: 1
Gearshift Operating Shaft For Metropolitan
Operating shaft (used), sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Handbrake Cable Guide For Metropolitan Handbrake
Guide for handbrake cable (used); Fits: All Metropolitans
QTY Required: 2
Head Gasket Set For 1G Engine Prefix Metropolitan Engine
Head gasket set – Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: to Chassis # E11000
QTY Required: 1
Headlamp Sealed Beam Bulb For Metropolitan
Headlamp sealed beam unit; Fits: All Metropolitans
QTY Required: 2
Horn/Signal Rebuild Assembly For Early Metropolitan
Horn/signal assembly (X) Must send your unit to be rebuilt. No cores are available. . Does NOT include new horn retaining ring , plate or horn push button.
QTY Required: 1
Laygear Thrust Washer For Metropolitan
Thrust washer for laygear front; Fits: Chassis #E11001 –
QTY Required: 1
Lock Assembly, Upper For Metropolitan
Plate assembly, upper bonnet lock (used); Fits: All Metropolitans
QTY Required: 1
Oil Pump Drive Spindle For Metropolitan Used
Drive spindle (used); Fits: to Chassis # E11000
QTY Required: 1
Padding Kit for all Metropolitan Upholstery Kits
Padding kit for all Upholstery kits – includes all new padding for front seat bottom, front seat backs x 2, and rear seat back; 27 oz carpet pad to cover springs, firm polyethelene u foam, and spun bonded dacron. Instructions included. Prior upholstery experience is helpful but not required. Oversize shipping surcharge will be added to this product.
QTY Required:
Piston Set, Std. 0.04 For Metropolitan
Piston set, std. 0.04; Fits: 1G engine prefix
QTY Required: 1
Radiator Top Cooling Hose For Metropolitan
Top hose, radiator outlet, rubber.; Fits: All Metropolitans
QTY Required: 1
Radio Left Outer Knob For Metropolitan
Radio left outer knob; Fits: All Metropolitans
QTY Required: 1
Rear Bumper Bolt Spacer For Metropolitan
Spacer for bumper bolt; Fits: All Metropolitans
QTY Required: 2
Rear Shoe Set For Metropolitan Brakes
Shoe set, rear (shoes for both rear wheels); Fits: All Metropolitans
QTY Required: 1
Rear Window Glass 3 Piece – Right For Metropolitan
Glass, 3 pc right (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Reveal Moudling Chrome – Upper Right For Metropolitan Windscreen
Reveal moudling, upper right (used)
QTY Required: 1
Shoe Set, Front For Metropolitan Brakes
Shoe set, front (X) Please send in your brake shoes to be refurbished. Sorry, no cores available.
QTY Required: 1
Trunk (Boot) Lid Weatherstrip For Metropolitan
Weatherstrip trunk lid, rubber; Fits: All Metropolitans
QTY Required: 1
Water Pump Pulley For Metropolitan 2G Engine
Pulley for water pump and fan (used); Fits: 2G to 2G19182 Met engine
QTY Required: 1
Accelerator Boot Seal For Metropolitan
Boot seal for arm, rubber. Fits: Met Chassis # E11001-
QTY Required: 1
Air Cleaner Bracket Grommet For Metropolitan
Grommet, bracket to air cleaner; Fits: 560 Metropolitans
QTY Required: 2
Ashtray LID Pebble For Metropolitan
Lid only, ashtray Pebble, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Brake Connector, 4-Way For Metropolitan Brakes
Brake Connector, 4-way on wheel house; Fits: All Metropolitans
QTY Required: 1
Brake Shoe Return SPRING Cylinder End For Metropolitan Brakes
Spring, brake shoe return – cylinder end; Fits: All Metropolitans
QTY Required: 2
Carburettor Float For Metropolitan
Zenith Float, reproduction made of copper by Kip Motor Co. You can know replace the float and keep your OEM carburettor. Original carburettors are far superior! Fits: All Metropolitans
QTY Required: 1
Coil Spring Cushion For Metropolitan
Cushion, rubber for coil spring; Fits: All Metropolitans
QTY Required: 4
Convertible Bolt Body Pillar For Metropolitan
Bolt, convertible frame to body pillar; Fits: All 541/561 Convertible Metropolitans
QTY Required: 2
Cylinder Block Side Cover Front For Metropolitan
Side cover, front (used); Fits: All Metropolitans
QTY Required: 1
Exhaust Guide For 1G Engine Prefix Metropolitan Cylinder Head
Guide, exhaust; Fits: to Chassis # E11000
QTY Required: 4
Exhaust Silencer – Muffler For Metropolitan
Silencer – Muffler, new production mufflers made to original specifications. Please allow 1 week production. Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Fan Housing Cover For Metropolitan Weather Eye
Front cover (used), fan housing ; Fits: All Metropolitans
QTY Required: 1
Front Bumper Bracket – Left For Metropolitan
Bracket, left (used); Fits: All Metropolitans
QTY Required: 1
Fuel Pump Pipe Rebuild For Metropolitan
Pipe, pump/carburettor (X); Fits: All Metropolitans. Please send in your pipe for refurbishing. Sorry, no cores available.
QTY Required: 1
Gearbox Gasket Set For 1G Engine Prefix Metropolitan
Gasket set, includes all gaskets for gearbox rebuild. Does not include oil seals. Fits: Chassis to #E11000
QTY Required: 1
Handbrake Link Balance Lever For Metropolitan Handbrake
Link, brake balance lever (used); Fits: All Metropolitans
QTY Required: 1
Head Gasket Set For Metropolitan Engines
Head gasket set Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: Chassis # E11001 –
QTY Required: 1
Hub Bearing Retaining Nut – RHT For Metropolitan
Nut, Righthand Thread; Fits: All Metropolitans
QTY Required: 1
Lock Assembly, Lower For Metropolitan
Plate assembly, lower bonnet lock (used); Fits: 540 Metropolitans
QTY Required: 1
Mist Gray P907 For Early Metropolitan
Mist Gray paint is available in different types such as acrylic enamel and urethane. Please call 888-243-0440 for quote as price is determined on color, quantity and type of paint selected. Fits: Metropolitan 540
QTY Required: As Required
Operating Shaft Bracket For Metropolitan
Bracket for operating shaft lower bearing (used), sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Piston Set, Std. For Metropolitan
Piston set, standard; includes rings and pins. Fits: 2G engine prefix.
QTY Required: 1
Radiator “T” Hose For Metropolitan
“T” hose to water pump with outlet to heater, rubber. ; Fits: All Metropolitans
QTY Required: 1
Radio Right Inner Knob For Metropolitan
Radio right inner knob; Fits: All Metropolitans
QTY Required: 1
Rear Bumper Bolt Chrome For Metropolitan
Bumper bolt chrome, outer to body; Fits: All Metropolitans
QTY Required: 2
Rear Window Glass 3 Piece – Right For Metropolitan
Glass, 3 pc right (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Reveal Moulding Chrome – Lower For Metropolitan Windscreen
Reveal moulding, lower (used)
QTY Required: 1
Rocker Shaft Lockwasher For Metropolitan
Lockwasher, nut rocker shaft; Fits: All Metropolitans
QTY Required: 2
Vent Window Weatherstrip For Metropolitan
Weatherstrip, window vent (pair); Fits: All Metropolitans with vent windows
QTY Required: 1
Water Pump Pulley For Metropolitan 2G + Engine
Pulley for water pump and fan (used); Fits: from 2G19183 Met engine +
QTY Required: 1
Wiring Harness MAIN For Metropolitan
Main harness, engine to dash, tape wrapped like the original made by KMC
QTY Required: 1
Air Cleaner Brace For Early Metropolitan
Brace, air cleaner; Fits: 540 Metropolitans
QTY Required: 1
Bellcrank Lever For Metropolitan
Bellcrank lever (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Brake Pipe, 3-Way/4-Way For Metropolitan Brakes
Brake line pipe, from 3-way to 4-way connector on chassis; Fits: All Metropolitans
QTY Required: 1
Brake Shoe Return SPRING Adjuster End For Metropolitan Brakes
Spring, brake shoe return – adjuster end; Fits: All Metropolitans
QTY Required: 2
Carburettor Throttle Shaft For Metropolitan
Throttle shaft, carburettor; Fits: All Metropolitans
QTY Required: 1
Carpet Set Black For Metropolitan
Carpet set, front and back with rubber heel pad. Made of black automotive carpet; 100% nylon pile. Felt pad included. Click here for details. Custom carpet available, please inquire. Made by Kip Motor Company. Fits: All Metropolitans
QTY Required: 1
Cigar Lighter Assembly For Metropolitan
Cigar lighter assembly; Fits: to Chassis # E34076
QTY Required: 1
Conversion Gasket Set For 1G Engine Prefix Metropolitan Engine
Conversion set includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # to E11000
QTY Required: 1
Convertible Top Black For Early Metropolitan
Convertible top, black pin point vinyl with single window. Shipped with snaps for local installation to ensure perfect alignment to your snap studs on vehicle. Fits: 541 Metropolitans
QTY Required: 1
Drive Shaft Sleeve Yoke For Metropolitan
Sleeve yoke (used); Fits: Chassis # to E11000
QTY Required: 1
Exhaust Guide For Metropolitan Cylinder Head
Guide, exhaust; Fits: Chassis # E11001 –
QTY Required: 4
Exhaust Manifold Gasket For Metropolitan
Gasket, manifold to cylinder head; Fits: to Chassis # E11000
QTY Required: 1
Fan Housing Cover SEAL For Metropolitan Weather Eye
Shroud, rubber to fan housing cover; Fits: All Metropolitans
QTY Required: 1
Front Seat Bottom Frame For Metropolitan
Bottom frame (used) 1 7/8″ rise (limited stock). Or send in your frames for refurbishment.
QTY Required: 1
Gearbox Gasket Set For Metropolitan
Gasket set, includes all gaskets for gearbox rebuild. Does not include oil seals. Fits: Chassis # E11001 –
QTY Required: 1
Handbrake Felt Washer For Metropolitan Handbrake
Washer, felt for lever; Fits: All Metropolitans
QTY Required: 7
Horn Retaining Ring For Metropolitan
Retaining ring, made by KMC artisans. Fits: All Metropolitans
QTY Required: 1
Hub Bearing Retaining Nut – LHT For Metropolitan
Nut, Lefthand Thread; Fits: All Metropolitans
QTY Required: 1
Hubcap ” Nash” For Metropolitan
Hubcap, ‘Nash’ embossed and painted red on hubcap; Fits: NASH Metropolitans
QTY Required: 4
Laygear Needle Bearing For Metropolitan
Needle bearing for laygear outer front; Fits: Chassis #E11001 –
QTY Required: 3
Operating Shaft Lever, 2nd & 3rd For Metropolitan
Lever, 2nd & 3rd gear (used) operating shaft, sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Piston Set, Std. 0.01 For Metropolitan
Piston set, std. 0.01; Fits: 2G engine prefix
QTY Required: 1
Radiator Hose Clamp For Metropolitan
Clamp for inlet hose, rubber; Fits: All Metropolitans
QTY Required: 6
Radio Right Outer Knob For Metropolitan
Radio right outer knob; Fits: All Metropolitans
QTY Required: 1
Rear Bumper Bolt Spacer For Metropolitan
Spacer for bumper bolt; Fits: All Metropolitans
QTY Required: 2
Reveal Moulding Chrome – Right For Metropolitan Windscreen
Reveal moulding, right (used)
QTY Required: 1
Shoe Return Spring For Metropolitan Brakes
Brake shoe return spring; Fits: All Metropolitans
QTY Required: 4
Steering Box Side Cover Gasket For Metropolitan
Gasket, for side cover steering box; Fits: All Metropolitans
QTY Required: 1
Tail Lamp Tail Bezel For Metropolitan
Tail bezel, plastic painted silver; made by KMC artisans; Fits: All Metropolitans
QTY Required: 2
Trunk Drain Hose Clamp For Metropolitan
Hose clamp for drain tube; Fits: All Metropolitans
QTY Required: 2
Vent Window Glass For Metropolitan
Glass, vent window; Fits: All Metropolitans with vent windows
QTY Required: 2
Water Pump Gasket For Early Metropolitan
Gasket for water pump to cylinder block; Fits: to Chassis # E10998
QTY Required: 1
Wiring Harness HORN For Metropolitan
Horn harness, horn to horn, tape wrapped like the original made by KMC
QTY Required: 1
Bellcrank Bracket (used) For Metropolitan
Bracket for bellcrank (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Bonnet Bumper Side For Metropolitan
Bumper, bonnet top side – rubber; Fits: All Metropolitans
QTY Required: 12
Brake Connector, 3-Way For Metropolitan Brakes
Connector, 3-way on chassis channel; Fits: All Metropolitans
QTY Required: 2
Brake Pedal Lever For Metropolitan Brakes
Lever, brake pedal (used); Fits: Chassis # E1001 – E11000
QTY Required: 1
Carburettor Insulator For Metropolitan
Insulator for carburettor body; Fits: All Metropolitans
QTY Required: 1
Clutch Plate For Early Metropolitan
Clutch plate (X75). Price includes $75 core charge .
QTY Required: 1
Conversion Gasket Set For Metropolitan Engines
Conversion set Includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # E11001 –
QTY Required: 1
Convertible Top – Tan For Early Metropolitan
Convertible top, tan pin point vinyl with single window. Window is STITCHED in, not heat sealed. Shipped with snaps for local installation to ensure perfect alignment to your snap studs on vehicle. Three year warranty. Made-on-Demand; please allow 2 weeks for production. Fits: 541 Metropolitans
QTY Required: 1
Cylinder Block Side Cover Gasket For Metropolitan
Gasket, side cover; Fits: All Metropolitans
QTY Required: 2
Distributor 40284 Rebuild For 1G Engine Prefix Metropolitan
Distributor 40284 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. ; Fits: 1G Met engine prefix
QTY Required: 1
Door Moulding Outer Righthand For Metropolitan
Moulding, right (used). Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Drive Shaft Sleeve Yoke For Metropolitan
Sleeve yoke (used); Fits: Chassis # E11000 – E28705
QTY Required: 1
Exhaust Clamp assembly For Metropolitan
Exhaust clamp assembly; Fits: All Metropolitans
QTY Required: 4
Exhaust Manifold Gasket For Metropolitan
Gasket, manifold to cylinder head; Fits: Chassis # E11001 –
QTY Required: 1
Fan Housing Door Assembly For Metropolitan Weather Eye
Door assembly (used); Fits: All Metropolitans
QTY Required: 1
Front Bumper Spacer For Metropolitan
Spacer for bumper bolt; Fits: All Metropolitans
QTY Required: 2
Front Right Seat Back Frame For Metropolitan
Right frame (used) Not Currently Available
QTY Required: 1
Handbrake Support Lever For Metropolitan Handbrake
Lever, brake balance support assembly (used); Fits: All Metropolitans
QTY Required: 1
Headlamp Body Gasket For Metropolitan
Gasket, headlamp to fender (rubber); Fits: All Metropolitans
QTY Required: 2
Hub Bearing Retaining Nut Washer For Metropolitan
Washer, bearing retaining nut; Fits: All Metropolitans
QTY Required: 2
Ignition Key Code Cut FP For Metropolitan
Key, code cut FP (please tell us your key code in order comments). Fits: All Metropolitans
QTY Required: 1
Oil Hole Plug For Metropolitan Cylinder Head
Plug, oil hole; Fits: Chassis # E11001 –
QTY Required: 1
Piston Set, Std. 0.02 For Metropolitan
Piston set, std. 0.02; Fits: 2G engine prefix
QTY Required: 1
Radiator Lower Hose For Metropolitan
Lower hose, radiator inlet, rubber; Fits: All Metropolitans
QTY Required: 1
Reveal Moulding Chrome – Left For Metropolitan Windscreen
Reveal moulding, left (used)
QTY Required: 1
Trunk (Boot) Lock Assembly For Metropolitan
Lock assembly inside trunk lid; Fits: All Metropolitans
QTY Required: 1
Vent Window Seal to Door For Metropolitan
Seal, between vent window and door; Fits: All Metropolitans
QTY Required: 2
Water Pump Gasket For Late Metropolitan
Gasket for water pump to cylinder block; Fits: Chassis # E11001+
QTY Required: 1
Weatherstrip – Rear Window Glass 3 Piece For Metropolitan
Weatherstrip, rear window glass 3 pc; Fits: to Chassis # E13619
QTY Required: 1
Wheel Cylinder, Front Right For Metropolitan Brakes
Wheel cylinder, front right. Sorry, not available; send in your wheel cylinders to be rebuild or purchase rebuild kit. </font color>
QTY Required: 2
Wiring Harness BODY For Metropolitan
Body harness, main to tail, tape wrapped like the original made by KMC
QTY Required: 1
Bellcrank Spring Clip For Metropolitan
Spring clip for bellcrank, anti rattle (used); sandblasted and primed.Fits: Met Chassis # E11001-
QTY Required: 1
Bonnet Bumper Front For Metropolitan
Bumper, bonnet top front – rubber; Fits: All Metropolitans
QTY Required: 2
Brake Pedal Lever For Metropolitan Brakes
Lever, brake pedal (used); Fits: Chassis # E11001 – E29283
QTY Required: 1
Brake Pipe, Master/3-Way For Metropolitan Brakes
Brake line pipe, master cylinder to 3-way connector; Fits: All Metropolitans
QTY Required: 1
Courtesy Light Assembly For Metropolitan
Courtesy light assembly (fits under dash); Fits: All Metropolitans
QTY Required: 1
Cylinder Block Vent Tube For 1G Engine Prefix Metropolitan
Vent tube (used), cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Differential Oil Plug For Metropolitan
Drain/filler plug, differential ; Fits: All Metropolitans
QTY Required: 2
Distributor 40438 Rebuild For 2G Engine Prefix Metropolitan
Distributor 40438 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. Fits: 2G Prefix Met Engine
QTY Required: 1
Door – Right For Metropolitan
Door, right (used) sorry, no longer available; Fits: to Chassis # E48847
QTY Required: 1
Door Moulding Outer Lefthand For Metropolitan
Moulding, left (used). Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Fan Housing GASKET For Metropolitan Weather Eye
Gasket, fan housing ; Fits: All Metropolitans
QTY Required: 1
Floor Accessory Mat, Pair With “M” Embossed For Metropolitan
Mat, PAIR Rubber with “M” embossed; 11″ x 17″. Sorry, SOLD OUT.
QTY Required: 1
Front License Plate Holder For Metropolitan
Front License plate holder; Fits: All Metropolitans
QTY Required: 1
Front Parking Signal Assembly For Metropolitan
Parking signal assembly includes rim, lens, bulb, and rubber body; Fits: All Metropolitans
QTY Required: 2
Handbrake Balance Lever For Metropolitan Handbrake
Lever, brake balance (used); Fits: All Metropolitans
QTY Required: 1
Ignition Key, Code Cut FA For Metropolitan
Key, code cut FA (please tell us your key code in order comments). Fits: All Metropolitans
QTY Required: 1
Operating Shaft Lever, 1st & Reverse For Metropolitan
Lever, 1st & Reverse operating shaft lower (used); Fits: All Metropolitans
QTY Required: 1
Piston Set, Std. 0.03 For Metropolitan
Piston set, std. 0.03; Fits: 2G engine prefix
QTY Required: 1
Reveal Moudling Clip Chrome – Upper Center For Metropolitan Windscreen
Clip, upper center; For: 3 piece trim
QTY Required: 1
Steering Box End Cover Gasket For Metropolitan
Gasket, end cover steering box; Fits: All Metropolitans
QTY Required: 1
Stud Short For 1G Engine Prefix Metropolitan Cylinder Head
Stud, short for rocker bracket; Fits: to Chassis # E11000
QTY Required: 2
Tail Lamp Body Gasket For Metropolitan
Gasket, lamp seating (rubber); Fits: All Metropolitans
QTY Required: 2
The Metropolitan Book Mk VIII
The Metropolitan Book Mk VIII. Kip Motor’s parts catalog with exploded views and pricing. Comes with your first purchase!
QTY Required: 1
Thrust Washer, .1565-75″ For Metropolitan
Thrust washer, .1565-75″; Fits: Chassis #E11001 –
QTY Required: 1
Trunk (Boot) Handle With Key For Metropolitan
Trunk handle chrome with locking key; Fits: All Metropolitans
QTY Required: 1
Weatherstrip – Rear Window Glass 3 Piece For Metropolitan
Weatherstrip, rear window glass, 3 pc; Fits: Chassis # E13620 –
QTY Required: 1
Window Regulator Rebuild – Left For Metropolitan
Regulator, left (X) Must send in your unit to be rebuilt; no cores available. ; Fits: All Metropolitans with NO vent windows
QTY Required: 1
Wiring Harness PANEL LIGHT For Metropolitan
Panel light harness, tape wrapped like the original made by KMC
QTY Required: 1
Air Cleaner Hose Clamp For Metropolitan
Clamp, for rubber hose; Fits: All Metropolitans
QTY Required: 2
Bellcrank Link For Metropolitan
Link from bellcrank to accelerator shaft (used); sandblasted and primed. Fits: All Metropolitans
QTY Required: 1
Brake Pipe, 3-Way/Hose For Metropolitan Brakes
Brake line pipe, 3-way connector to rear brake hose; Fits: All Metropolitans
QTY Required: 1
Clutch Master Cylinder For Metropolitan
Master cylinder 5/8″ for clutch system. Only use CASTROL Brake/Clutch DOT 4 fluid. Fits: Chassis # E11001 –
QTY Required: 1
Cylinder Block For 1G Engine Prefix Metropolitan
Cylinder block (used) for early Met engine with 1G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Cylinder Block Vent Tube For Metropolitan
Vent tube (used), cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Defroster Nozzle For Metropolitan
Defroster nozzle (used), sandblasted; Fits: All Metropolitans
QTY Required: 2
Differential Gasket For Metropolitan
Gasket, differential to axle case; Fits: All Metropolitans
QTY Required: 1
Drive Shaft Flange Yoke For Metropolitan
Flange yoke (used); Fits: All Metropolitans
QTY Required: 1
Exhaust Manifold Hot Spot Gasket For Metropolitan
Gasket, hot spot; Fits: All Metropolitans
QTY Required: 1
Fan Housing Retainer CLIP For Metropolitan
Spring Clip (used), to attach fan housing; Fits: All Metropolitans
QTY Required: 3
Front Left Seat Back Frame For Metropolitan
Left frame (used) Not Currently Available 1 3/8″ rise
QTY Required: 1
Gearbox Oil Seal Rear For Metropolitan
Seal, rear extension; Fits: Chassis # E11000 – E28705
QTY Required: 1
License Lamp Assembly For Metropolitan
License lamp assembly includes the stainless steel cover, clear lens, rubber body gasket, bulb, and base. Fits: All Metropolitans
QTY Required: 1
Lighting/Ignition Cylinder with Key For Metropolitan
Cylinder lock with new key; Fits: All Metropolitans
QTY Required: 1
Lower Coil Spring Seat For Metropolitan
Seat (used), for lower coil spring; Fits: All Metropolitans
QTY Required: 2
Piston Set, Std. 0.04 For Metropolitan
Piston set, std. 0.04; Fits: 2G engine prefix
QTY Required: 1
Plate, Moulding Cover Support For Metropolitan
Plate, moulding cover support; Fits: All Metropolitans
QTY Required: 1
Radio Service Manual For Metropolitan
Radio Service manual, photocopy and ibco bound; Fits: All Metropolitans
QTY Required: 1
Reveal Moulding Clip Chrome – Lower Corner For Metropolitan Windscreen
Clip, lower corner, Sorry, no longer available
QTY Required: 2
Shift Rod, 1st & Reverse For Metropolitan
Shift rod, 1st & Reverse (used); Fits: All Metropolitans
QTY Required: 1
Short for Metropolitan Cylinder Head
Stud, short for rocker bracket; Fits: from Chassis # E11001 +
QTY Required: 2
Spare Wheel Mounting Bracket For Metropolitan
Bracket (used), spare wheel mounting – sandblasted; Fits: All Metropolitans
QTY Required: 1
Steering Box End Cover Olive Nut For Metropolitan
Nut for olive, end cover; Fits: All Metropolitans
QTY Required: 1
Wheel Cylinder, Front Left For Metropolitan Brakes
Wheel cylinder, front left (X), Exchange only. Send in your early wheel cylinder to be rebuilt or purchase rebuild kit. </font color>
QTY Required: 2
Window Regulator Rebuild – Right For Metropolitan
Regulator, right (X) Must send in your unit to be rebuilt. No cores available. ; Fits: All Metropolitans with NO vent windows.
QTY Required: 1
Wiring Harness HEADLAMP For Metropolitan
Headlamp harness, tape wrapped like the original made by KMC
QTY Required: 2
Accelerator Shaft For Early Metropolitan
Shaft, accelerator (used); sandblasted and primed. Fits: Met Chassis to E10998
QTY Required: 1
Air Cleaner Filter REPLACEMENT ASSEMBLY For Metropolitan
Air cleaner replacement assembly with dry filter. Made by Kip Motor Company; Fits: All Metropolitans
Note: If you are tired of the messy oil bath air cleaner, try our custom made replacement with replaceable dry filter elements.
QTY Required: 1
Brake Adjuster Assembly For Metropolitan Rear Brakes
Adjuster assembly; Fits: All Metropolitans
QTY Required: 2
Brake Hose Rear For Metropolitan Brakes
Hose, rear flexible; Fits: All Metropolitans
QTY Required: 1
Brake Lever BRACKET For Metropolitan Brakes
Bracket for brake and clutch return springs (used); Fits: All Metropolitans
QTY Required: 1
Clutch Repair Kit For Metropolitan
Repair kit, 5/8″. Includes all necessary components to repair/rebuild clutch master cylinder. Fits: Chassis # E11001 –
QTY Required: 1
Convertible Top Toggle For Metropolitan
Toggle to secure convertible top to header frame. Not currently available.
QTY Required: 2
Cylinder Block For 2G Engine Prefix Metropolitan
Cylinder block (used) for Met engine with 2G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Differential Bearing For Metropolitan
Bearing, differential; Fits: All Metropolitans
QTY Required: 2
Drive Shaft Dust Cover For Metropolitan
Dust cover (used); Fits: Chassis # to E11000
QTY Required: 1
Exhaust Manifold Clamp For Metropolitan
Clamp (yoke) for exhaust manifold; Fits: Chassis # E11001 –
QTY Required: 4
Fuel Gauge Instrument For Metropolitan
Fuel gauge instrument; Fits: All Metropolitans
QTY Required: 1
Gearbox Mounting Plate (used) For Metropolitan
Mounting plate, gearbox (used) sandblasted
QTY Required: 1
Handbrake Crossrod Long For Metropolitan Handbrake
Crossrod, long rear brake (used); Fits: All Metropolitans
QTY Required: 1
Heater CONTROL VALVE Assembly Rebuild For Metropolitan Weather Eye
Control heater valve (X) Please send in your unit to rebuild, no cores are available. Fits: All Metropolitans
QTY Required: 1
Horn Wiring Harness For Metropolitan
Wiring harness for horn ; Fits: All Metropolitans
QTY Required: 1
Lower Coil Screw For Metropolitan
Screw, lower spring seat to swivel pin; Fits: All Metropolitans
QTY Required: 2
Oil Pump Release Valve Spring For Metropolitan
Spring, oil release valve; Fits: Chassis # E11001 –
QTY Required: 1
Reveal Moulding – Rear Left For Metropolitan Backlight
Reveal moulding, rear left (used); Fits: to Chassis # E11000
QTY Required: 1
Reveal Moulding Clip Chrome For Metropolitan Windscreen
Clip, upper and lower for 2 piece trim
QTY Required: 2
Shift Rod, 2nd & 3rd For Metropolitan
Shift rod, 2nd & 3rd (used); Fits: All Metropolitans
QTY Required: 1
Spare Wheel Bracket Gasket For Metropolitan
Gasket, for spare tire bracket; Fits: All Metropolitans
QTY Required: 1
Steering Box End Cover Olive For Metropolitan
Olive, stator tube; Fits: All Metropolitans
QTY Required: 1
Trunk Handle Striker Plate For Metropolitan
Striker plate for trunk handle; Fits All Metropolitans
QTY Required: 1
Wiring Harness DIP SWITCH For Metropolitan
Dip switch harness, tape wrapped like the original made by KMC
QTY Required: 1
Accelerator Shaft For Late Metropolitan
Shaft, accelerator (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Air Cleaner Replacement FILTER For Metropolitan
Replacement filter for air cleaner; Fits: All Metropolitans
QTY Required: 1
Brake Lever Bracket SCREW For Metropolitan Brakes
Screw, bracket to body; Fits: Chassis # E11001 –
QTY Required: 1
Clutch Pedal For Metropolitan
Clutch pedal (used), sandblasted and primed. Fits: All Metropolitan
QTY Required: 1
Convertible Top Toggle Catch For Metropolitan
Catch for toggles, not currently available.
QTY Required: 2
Diff Bearing Washer, .004″ For Metropolitan
Washer, .004″, differential packing bearing; Fits: All Metropolitans
QTY Required: 1
Door Bottom Repair Section – Left Or Right For Metropolitan
Repair section, door bottom – left or right, made of 16 guage 1018 steel; Fits: All Metropolitans
QTY Required: 2
Drive Shaft Dust Cover For Metropolitan
Dust cover (used); Fits: Chassis # E11000 – E28705
QTY Required: 1
Finish Moulding – Lower Right For Metropolitan Windscreen
Finish moulding, lower right (used)
QTY Required: 1
Front Seat Bottom Spring For Metropolitan
Seat spring, bottom (used) 1 3/8″ rise (limited stock). Or send in your frame and springs for refurbishment.
QTY Required: 1
Gearbox Mounting Plate (used) For Metropolitan
Mounting plate, gearbox (used) sandblasted
QTY Required: 1
Grille Chrome Bar For Hudson & Nash Metropolitan
Grille bar for Hudson and Nash Metropolitans, Hand casted, sanded then triple chromed. Fits: 540 Metropolitans
QTY Required: 1
Handbrake Pin For Metropolitan Handbrake Lever
Pin, joint to balance lever; Fits: All Metropolitans
QTY Required: 2
Heater Control Valve SEAL For Metropolitan Weather Eye
Seal, valve to body; Fits: All Metropolitans
QTY Required: 1
Oil Pump Release ValveWasher For Metropolitan
Washer, for cap nut oil release valve; Fits: All Metropolitans
QTY Required: 2
Reveal Moulding – Rear Right For Metropolitan Backlight
Reveal moulding, rear right (used); Fits: to Chassis # E11000
QTY Required: 1
Shift Rod Trunion For Metropolitan
Trunion for shift rod (used); Fits: All Metropolitans
QTY Required: 2
Spare Wheel Nut For Metropolitan
Nut, grooved for spare wheel mounting; Fits: All Metropolitans
QTY Required: 1
Speedometer Gear Key For Metropolitan
Key, speedometer gear; Fits: Chassis #E11001 –
QTY Required: 1
Steering Box Support Bracket For Metropolitan
Bracket (used), steering support; Fits: All Metropolitans
QTY Required: 1
Stud Long For Metropolitan Cylinder Head
Stud, long for rocker bracket; Fits: Chassis # E11001 –
QTY Required: 2
Thermostat, 180 Degrees For Metropolitan
Thermostat, 180 degrees; Fits: All Metropolitans
QTY Required: 1
Wheel Cylinder Repair Kit For Metropolitan Front Brakes
Repair kit for all front wheel cylinders; parts for one axle. Fits: Chassis # E1001 – E29283
QTY Required: 1
Wheel Cylinder, Rear For Early Metropolitan Rear Brakes
Wheel cylinder, rear Not currently available; order the repair kit or send your in for rebuilding. Fits: Chassis # E1001 – E29283
QTY Required: 2
Wiring Harness LICENSE LAMP For Metropolitan
License lamp harness, tape wrapped like the original made by KMC. Sorry, no longer available
QTY Required: 1
Accelerator Bearing For Metropolitan
Bearing for accelerator shaft, brass & rubber; Fits: All Metropolitans
QTY Required: 1
Axle Swivel Assembly For Metropolitan
Axle (used), swivel assembly (spindle); Fits: to Chassis # E26872
QTY Required: 2
Brake Lever Bracket Screw SPACER For Metropolitan Brakes
Spacer, between screw and bracket; Fits: Chassis # E 11001 –
QTY Required: 1
Brake Pipe, 3-Way/Right Cylinder For Metropolitan Brakes
Brake line pipe, 3-way connector to right wheel cylinder. Fits: Chassis # E1001-E29283
QTY Required: 1
Diff Bearing Washer, .010″ For Metropolitan
Washer, .010″, differential packing bearing; Fits: All Metropolitans
QTY Required: 1
Fender – Front Left For Metropolitan
Fender, front left (used); Fits: All Metropolitans
QTY Required: 1
Finish Moulding – Lower Left For Metropolitan Windscreen
Finish moulding, lower left (used)
QTY Required: 1
Front Parking Signal Body, Rubber For Metropolitan
Body, rubber ; Fits: All Metropolitans
QTY Required: 2
Fuel Tank Pipe to Pump For Metropolitan
Pipe, tank end to pump (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Generator Mounting Bracket For Metropolitan
Rear Bracket, generator (used); Fits: All Metropolitans
QTY Required: 1
Glovebox Cubby For Metropolitan
Glovebox cubby made from heavy duty black cardboard; Fits: All Metropolitans
QTY Required: 1
Handbrake Lever Felt Washer For Metropolitan Handbrake
Washer, felt for pin; Fits: All Metropolitans
QTY Required: 4
Heater Control Valve SPACER For Metropolitan Weather Eye
Spacer, valve ; Fits: All Metropolitans
QTY Required: 2
Lighting/Ignition Switch For Metropolitan
Lighting/ignition switch, 4 prong. Sorry, 6 prong switches not available. Replacement comes with wiring instructions. Fits: All Metropolitans
QTY Required: 1
Oil Pump Release Valve Nut For Metropolitan
Nut, for oil release valve; Fits: All Metropolitans
QTY Required: 1
Rear Bearing For Metropolitan
Bearing rear, 3rd motion shaft; Fits: All Metropolitans
QTY Required: 1
Reveal Moulding – Upper For Metropolitan Backlight
Reveal moulding (used); Fits: Chassis # E11001 –
QTY Required: 1
Shift Rod Rubber Bushing For Metropolitan
Rubber bushing for shift rod; Fits: All Metropolitans
QTY Required: 4
Spare Wheel Nut Long For Metropolitan
Nut, long for spare wheel mounting; Fits: All Metropolitans
QTY Required: 2
Stud For 1G Engine Prefix Metropolitan Cylinder Head
Stud, water outlet elbow; Fits: to Chassis # E11000
QTY Required: 3
Wiring Harness TAIL LAMP For Metropolitan
Stop/tail harness, tape wrapped like the original made by KMC
QTY Required: 2
Accelerator Bearing Bracket (used) For Metropolitan
Bracket for bearing (used); sandblasted and primed. Fits: All Metropolitans
QTY Required: 1
Bracket, Master Cylinder For Metropolitan Brakes
Bracket, support master cylinder (used); Fits: Chassis # E1001 – E11000
QTY Required: 1
Cage Assembly Thrust Washer For Metropolitan
Thrust washer, cage assembly gear; Fits: All Metropolitans
QTY Required: 2
Clutch Pedal Sealing Cushion For Metropolitan
Sealing rubber cushion for clutch pedal lever; Fits: All Metropolitans
QTY Required: 1
Convertible Top Snap For Metropolitan
Snap for securing convertible top onto your snap studs on body.
QTY Required: 15
Door Finish Plate Front Right For Metropolitan
Finish plate, front right hand; Fits: All Metropolitans
QTY Required: 1
Fender – Front Right For Metropolitan
Fender, front right (used); Fits: All Metropolitans
QTY Required: 1
Front Seat Bottom Padding For Metropolitan
Padding, front seat bottom; Fits: All Metropolitans
QTY Required: 1
Fuel Tank Pipe Intermediate For Metropolitan
Pipe, tank to pump intermediate (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Gearbox Mounting Plate Gasket for Metropolitan Engine
Gasket, mounting plate to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Generator Mounting Pillar For Metropolitan
Pillar, generator mounting (used);Fits: Chassis # to E10998
QTY Required: 1
Handbrake Crossrod Short For Metropolitan Handbrake
Crossrod, short rear brake (used); Fits: All Metropolitans
QTY Required: 1
Heater Defroster NOZZLE For Metropolitan Weather Eye
Defroster nozzle (used); Fits: All Metropolitans
QTY Required: 2
Instrument Panel For Metropolitan
Instrument panel (used), sandblasted; Fits: All Metropolitans
QTY Required: 1
Oil Pump Adaptor For Metropolitan
Adaptor, for oil pressure switch (used); Fits: Chassis # E11001 –
QTY Required: 1
Partition Moulding For Metropolitan Backlight
Partition moulding (used); Fits: to Chassis # E13619
QTY Required: 2
Plug Freeze/Welch For Metropolitan Engine Block
Welch or freeze plug, large; Fits: All Metropolitans
QTY Required: 4
Spare Wheel Cap – Plain For Metropolitan
Wheel cap, plain (used); Fits: All Metropolitans
QTY Required: 1
Speedometer Gear Oil Seal For Metropolitan
Oil seal speedometer gear; Fits: 540 8-37 axle
QTY Required: 1
Starter Cable AssemblyFor Metropolitan
Cable assembly, starter; Fits: All Metropolitans
QTY Required: 1
Stud For Metropolitan Cylinder Head
Stud, water outlet elbow; Fits: Chassis # E11001 –
QTY Required: 3
Transmission Floor Filler Plug For Metropolitan
Plug, filler hole; Fits: All Metropolitans
QTY Required: 1
Wheel Cylinder Repair Kit For Early Metropolitan Rear Brakes
Repair kit rear wheel cylinders; parts for one axle Fits: Chassis # E1001 – E29283
QTY Required: 1
Window Regulator Handle With Cream Knob For Metropolitan
Handle with cream knob; Fits: All Metropolitans
QTY Required: 2
Wiring Harness TAIL SIGNAML For Metropolitan
Tail/signal harness, tape wrapped like the original, made by KMC
QTY Required: 2
Accelerator Spring For Shaft Metropolitan
Spring for shaft, anti rattle; Fits: All Metropolitans
QTY Required: 1
Bracket, Master Cylinder For Metropolitan Brakes
Bracket, support master cylinder (used); Fits: Chassis # E11001 –
QTY Required: 1
Brake Pipe, 3-Way/Left Cylinder For Metropolitan Brakes
Brake line pipe, 3-way connector to left wheel cylinder. Fits: Chassis # E1001 – E29283
QTY Required: 1
Cage Assemblyy Pinion Gear For Metropolitan
Pinion gear, cage assembly gear; Fits: All Metropolitans
QTY Required: 2
Clutch Lever For Early Metropolitan
Lever (used); sandblasted and primed; Fits: All Metropolitans.
QTY Required: 1
Convertible Top Cover – Black For Metropolitan
Top cover, black. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle. Please inquire if you want a different vinyl color.
QTY Required: 1
Door Finish Plate Front Left For Metropolitan
Finish plate, front left hand; Fits: All Metropolitans
QTY Required: 1
Engine Support Bracket Right For 1G Engine Prefix Metropolitan Engine
Bracket, right (used) sandblasted; Fits: Chassis # to E11000
QTY Required: 1
Fender – Rear Left For Metropolitan
Fender, rear left (used); Fits: All Metropolitans
QTY Required: 1
Finish Moulding – Upper Right For Metropolitan Windscreen
Finish moulding, up right (used)
QTY Required: 1
Fuel Tank Pipe Pump End For Metropolitan
Pipe, tank to pump end (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Generator Mounting Pillar For Metropolitan
Pillar, generator mounting (used); Fits: Chassis # E11001 –
QTY Required: 1
Heater HOSE Elbow to Valve For Metropolitan Weather Eye
Hose, heater outlet elbow to heater control valve – rubber; Fits: All Metropolitans
QTY Required: 1
Instrument Panel Brace – Lefthand For Metropolitan
Brace, Lefthand (used), instrument panel to dash assembly
QTY Required: 1
Partition Moulding For Metropolitan Backlight
Partition moulding (used); Fits: Chassis # E13620 –
QTY Required: 2
Plug For Metropolitan Engine Block
Plug, crankcase oil gallery; Fits: 1G and 2G prefix engines
QTY Required: 1
Spare Wheel Cap Bolt For Metropolitan
Cap bolt, spare wheel; Fits: All Metropolitans
QTY Required: 2
Speedometer Oil Seal For Metropolitan
Oil seal speedometer gear; Fits: 540 9-41 axle
QTY Required: 1
Starter Sleeve Connector For Metropolitan
Connector sleeve for starter switch; Fits: All Metropolitans
QTY Required: 1
Wiring Harness “LUCAS” Wiring Ties For Metropolitan
‘LUCAS’ wiring ties, set of 5 for wiring harness
QTY Required: 1
Axle Upper Bushing For Metropolitan
Bushing, top, axle swivel; Fits: All Metropolitans
QTY Required: 2
Belt Moulding – Rear Right For Metropolitan Backlight
Belt moulding, rear right (used); Fits: All Metropolitans
QTY Required: 1
Bracket For Spring Pull Back Early Metropolitan
Bracket for carburettor pull back spring (used); Fits: Met Chassis to E10998
QTY Required: 1
Cage Assembly Thrust Washer For Metropolitan
Thrust washer, pinion gear cage assembly; Fits: All Metropolitans
QTY Required: 2
Clutch Lever For Late Metropolitan
Lever (used); sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Convertible Top Cover – Tan For Early Metropolitan
Top cover, tan. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle.
QTY Required: 1
Distributor Housing For Metropolitan
Distributor housing (used); Fits: Chassis # to E10998
QTY Required: 1
Door Finish Plate Rear Right For Metropolitan
Finish plate, rear right hand; Fits: All Metropolitans
QTY Required: 1
Engine Support Bracket Right For Metropolitan Engine
Bracket, right (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Fender – Rear Right For Metropolitan
Fender, rear right (used); Fits: All Metropolitans
QTY Required: 1
Finish Moulding – Upper Left For Metropolitan Windscreen
Finish moulding, upper left (used)
QTY Required: 1
Floor Cover For Master Cylinder Metropolitan
Cover, master cylinder access hole (floor); Fits: All Metropolitans
QTY Required: 1
Heater HOSES For Metropolitan Weather Eye
Hose, Heater control valve to heater & heater to return pipe – rubber; Fits: All Metropolitans
QTY Required: 2
Idler Assembly Rebuild For Metropolitan
Idler assembly refurbished (X85) Price includes a $85 core charge that is refunded once we receive your rebuildable core. Fits: to Chassis # E31762
QTY Required: 1
Instrument Panel Brace – Righthand For Metropolitan
Brace, Righthand (used), instrument panel to dash assembly
QTY Required: 1
License Lamp Grommet For Metropolitan
Grommet for cable (rubber); Fits: All Metropolitans
QTY Required: 1
License Plate Holder – Rear For Metropolitan
License holder, rear (used); Fits: All Metropolitans
QTY Required: 1
Pipe, Pump End For Metropolitan
Pipe, pump end (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Speedometer Pinion Bushing Gasket For Metropolitan
Gasket for speedomter pinion bushing; Fits: 540 8-37 axle
QTY Required: 1
Window Handle Escutcheon – Cream For Metropolitan
Escutcheon, cream – authentic reproduction made by Kip Motor Co; Fits: 540 Metropolitans
QTY Required: 2
Axle Bottom Bushing For Metropolitan
Bushing, bottom, axle swivel; Fits: to Chassis # E26872
QTY Required: 2
Belt Moulding – Rear Left For Metropolitan Backlight
Belt moulding, rear left (used); Fits: All Metropolitans
QTY Required: 1
Bracket For Spring Pull Back Late Metropolitan
Bracket for carburettor pull back spring; Fits: Met Chassis # E11001-
QTY Required: 1
Brake Adjusting Wrench For Metropolitan Brakes
Brake adjusting wrench – 1/4″ & 5/16″ square ends; Fits: All Metropolitans
QTY Required: 1
Brake Retaining Spring For Metropolitan Rear Brakes
Retaining spring; Fits: All Metropolitans
QTY Required: 2
Clutch Bracket For Metropolitan Clutch Master Cylinder
Bracket (used) to support the clutch master cylinder; sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Convertible Top Cover – Off White For Metropolitan
Top cover, off-white. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle. Inquire if you want a different vinyl color.
QTY Required: 1
Distributor Housing For Metropolitan
Distributor housing (used); Fits: Chassis # E11001 –
QTY Required: 1
Door Finish Plate Rear Left For Metropolitan
Finish plate, rear left hand; Fits: All Metropolitans
QTY Required: 1
Engine Support Bracket Left For 1G Engine Prefix Metropolitan Engine
Bracket, left (used) sandblasted; Fits: Chassis # to E11000
QTY Required: 1
Exhaust Valve For Metropolitan Cylinder Head
Exhaust valve; Fits: to Chassis # E11000
QTY Required: 4
Fender – Repair Section Rear Left Fender For Metropolitan
Repair section, rear left fender. Made of 16 gauge 1018 steel; Fits: All Metropolitans
QTY Required: 1
Floor Cover Gasket for Master Cylinder Metropolitan
Gasket,for the master cylinder cover ; Fits: All Metropolitans
QTY Required: 1
Heater ID Plate For Metropolitan Weather Eye
ID plate, “SMITHS” heater; Fits: All Metropolitans
QTY Required: 1
License Plate Bracket For Metropolitan
Bracket, license plate holder (used); Fits: All Metropolitans
QTY Required: 1
Oil Sump For 1G Engine Prefix Metropolitan
Sump , oil reservoir (used); Fits: to Chassis # E11000
QTY Required: 1
Pinion Taper Roller Bearing, Inner For Metropolitan
Bearing, inner, pinion gear; Fits: 540 Metropolitans
QTY Required: 1
Plug Taper For Metropolitan Engine Block
Plug, taper oil hole; Fits: Chassis # E11001 –
QTY Required: 2
Signal Indicator Warning Bulb For Metropolitan
Bulb, screw base for signal warning light assembly ; Fits: All Metropolitans
QTY Required: 7
Speedometer Pinion Gasket For Metropolitan
Gasket for speedomter pinion bushing; Fits: 540 9-41 axle to Chassis # E28705
QTY Required: 1
Starter Switch Insulator For Metropolitan
Insulator cap at switch; Fits: All Metropolitans
QTY Required: 2
Accelerator Return Spring For Metropolitan
Return spring for accelerator; Fits: All Metropolitans
QTY Required: 1
Belt Moulding Clip For Metropolitan Backlight
Clip, belt moulding (used); Fits: All Metropolitans
QTY Required: 1
Brake Lockplate For Metropolitan Rear Brakes
Lockplate for rear wheel cylinder; Fits: All Metropolitans
QTY Required: 2
Distributor Drive Spindle For Metropolitan
Drive spindle to distributor; Fits: All Metropolitans
QTY Required: 1
Door Retainer Right For Metropolitan
Retainer, right (used); Fits: All Hardtop/Saloon Metropolitans
QTY Required: 1
Engine Support Bracket Left For Metropolitan Engine
Bracket, left (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Exhaust Valve For Metropolitan Cylinder Head
Exhaust valve; Fits: Chassis # E11001 –
QTY Required: 4
Fender Repair Panel – Front Right Fender For Metropolitan
Repair panel, front right fender. Made of 16 ga 1018 steel, laser cut. ; Fits: All Metropolitans
QTY Required: 1
Fuel Hose – Pump to Carburettor Refurbished For Metropolitan
Hose, pump to carburettor (X) , Please send in your core to be refurbished.
QTY Required: 1
Idler Assembly Cover Gasket For Metropolitan
Gasket, idler assembly for cover; Fits: to Chassis # E31762
QTY Required: 1
License Plate Grommet For Metropolitan
Grommet for lamp wire; Fits: All Metropolitans; Fits: All Metropolitans
QTY Required: 1
Plug Screw For Metropolitan Engine Block
Plug, screw oil hole; Fits: 1H and A/C/FNH prefix engines
QTY Required: 1
Rotor Aftermarket For Metropolitan
Rotor Not warranted due to inconsistent quality. Fits: All Metropolitans
QTY Required: 1
Signal Indicator Warning Light Assembly For Metropolitan
Signal indicator warning light assembly (fits behind dash); Fits: All Metropolitans
QTY Required: 1
Window Handle Escutcheon Spring For Metropolitan
Spring, escutcheon; Fits: All Metropolitans
QTY Required: 2
Banjo Screw For Pipe to Pump Connection Metropolitan
Screw, banjo for pipe to pump connection
QTY Required: 1
Belt Moulding Retainer For Metropolitan Backlight
Retainer, belt moulding; Fits: All Metropolitans
QTY Required: 14
Brake Lever For Early Metropolitan Handbrake
Lever assembly for handbrake Fits: Chassis # E1001 – E29283
QTY Required: 2
Choke Cable Assembly For Metropolitan
Choke cable assembly with chrome knob; Fits: All Metropolitans
QTY Required: 1
Clutch Pipe Clip For Metropolitan Clutch Hydraulics
Clip, spring to attach clutch pipes to body; Fits: Chassis # E11001 –
QTY Required: 3
Door Retainer Left For Metropolitan
Retainer, left (used); Fits: All Hardtop/Saloon Metropolitans
QTY Required: 1
Engine Mount For 1G Engine Prefix Metropolitan Engine
Engine mount with bolts – made by Kip Motor to securely fasten engine unlike others that do not fit correctly.; Fits: to Chassis # E11000
QTY Required: 2
Fender Repair Section – Rear Right Fender For Metropolitan
Repair section, rear right fender. Mde of 16 gauge 1018 steel; Fits: All Metropolitans
QTY Required: 1
Front Seat Back Padding Right Or Left For Metropolitan
Padding, right or left front seat back; Fits: All Metropolitans
QTY Required: 2
Generator Pulley For Early Metropolitan
Pulley, generator (used); Fits: Chassis # to E10998
QTY Required: 1
Grommet – Headlamp Wire For Metropolitan
Headlamp grommet wire; Fits: All Metropolitans
QTY Required: 2
License Clamp For Metropolitan
Clamp, rear license plate; Fits: All Metropolitans; Fits: All Metropolitans
QTY Required: 1
Medallion “Nash” For Metropolitan
“Nash” Medallion handcrafted by Kip Motor artisans. Fits: 540 Metropolitans
QTY Required: 1
Oil Sump Gasket For 1G Engine Prefix Metropolitan
Gasket, sump to cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Pinion Bearing, Outer For Metropolitan
Bearing, outer, pinion gear; Fits: 540 Metropolitan
QTY Required: 1
Rotor Authentic Reproduction For Metropolitan
Rotor authentic reproduction. Superior to the cheap aftermarket spares. Made by KMC. Fits: All Metropolitans
QTY Required: 1
Speedometer Cable For 1G Engine Prefix Metropolitan
Cable, speedometer; Fits: Chassis to # E11000
QTY Required: 1
Valve Spring Set For 1G Engine Prefix Metropolitan Cylinder Head
Spring set (8) for valves; Fits: to Chassis # E11000
QTY Required: 1
Voltage Regulator For Metropolitan
Voltage regulator (control box); Fits: All Metropolitans
QTY Required: 1
Banjo Screw Washer For Metropolitan
Washer, for banjo screw; Fits: All Metropolitans
QTY Required: 2
Belt Moulding Retainer – Center For Metropolitan Backlight
Retainer, belt moulding – center; Fits: All Metropolitans
QTY Required: 1
Choke Cable Grommet For Metropolitan
Grommet for starter and mixture cables through dash; Fits: All Metropolitans
QTY Required: 1
Clutch Flexible Hose For Metropolitan
Hose, flexible to slave cylinder; Fits: Chassis # E11001 –
QTY Required: 1
Door Retainer Front Right For Metropolitan
Retainer, front right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Engine Mount For Metropolitan Engine
Engine mount with bolts – made by Kip Motor to securely fasten engine unlike others that do not fit correctly.; Fits: Chassis # #11001 –
QTY Required: 2
Fender Repair Section – Front Left Fender For Metropolitan
Repair panel, front left fender. Made of 16 ga 1018 steel, laser cut; Fits: All Metropolitans
QTY Required: 1
Generator Pulley For MidMetropolitan
Pulley, generator (used); Fits: Chassis # E11001 with 22258 generator
QTY Required: 1
Grommet – Main Harness/Dash
Grommet for main wiring harness to dash through firewall
QTY Required: 1
Headlining For Hartop Metropolitan
Headlining, Off White as original British Cream linen weave pattern; made-to-order, please allow 1 week production. Fits: Both 542 and 562 Metropolitans (Hardtops)
QTY Required: 1
Heater/Defrost ASSMEBLY (Weather Eye) Rebuild For Metropolitan
Heater assembly referred to as the Weather Eye in Tech manual, (X). Please send in your assembly for refurbishing.; Fits: All Metropolitans
QTY Required: 1
Idler Assembly Shaft Lubricator For Metropolitan
Lubricator, idler shaft; Fits: All Metropolitans
QTY Required: 3
Medallion “Hudson” For Metropolitan
“Hudson” Medallion, handcrafted by Kip Motor artisans. Fits: 540 Metropolitans
QTY Required: 1
Oil Sump Gasket For Metropolitan
Gasket, sump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Plug Oil Relief For Metropolitan Engine Block
Plug, oil relief valve vent hole; Fits: Chassis # E11001 –
QTY Required: 2
Shift Lever Shaft Felt Ring For Metropolitan
Felt ring for shaft; Fits: All Metropolitans
QTY Required: 2
Tire Cover British Cream For Metropolitan
Tire cover, off white to match convertible top. Piped in off-white or black, please specify. Fits: All Metropolitans
QTY Required: 1
Valve Spring Set For Metropolitan Cylinder Head
Spring set (8) for valves; Fits: Chassis # E11001 –
QTY Required: 1
Brake Dust Cover For Early Metropolitan Handbrake Lever
Dust cover for lever Fits: Chassis # E1001 – E29283
QTY Required: 2
Choke Cable Clip For Metropolitan
Clip for starter and mixture cables to dash; Fits: All Metropolitans
QTY Required: 2
Clutch Copper Washer Metropolitan Flexible Hose
Washer, copper for hose joint; Fits: Chassis # E11001 –
QTY Required: 1
Door Retainer Front Left For Metropolitan
Retainer, front left (used); Fits: All Convertible Metropolitans
QTY Required: 1
Dust Excluder Spring For Metropolitan
Spring , dust excluder; Fits: All Metropolitans
QTY Required: 2
Finishing Clip, Right For Metropolitan Backlight
Finishing clip, right (no longer available); Fits: Chassis # E13620 –
QTY Required: 1
Floor Pan – Front Left For Metropolitan
Floor pan, front left. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Headlining Front Listing Wire For Metropolitan
Listing wire, front; Fits: All Metropolitan 542, 562 hardtops
QTY Required: 1
Idler Assembly Support Bracket For Metropolitan
Bracket (used), support for idler assembly; Fits: to Chassis # E31762
QTY Required: 1
Mount Plate, Right For 1G Engine Prefix Metropolitan Engine
Mount plate, right (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Plug Oil Hole For Metropolitan Engine Block
Plug, oil hole oil filter boss; Fits: All Metropolitans
QTY Required: 1
Return Pipe CLAMP For Metropolitan Weather Eye
Clamp, heater pipe connections; Fits: All Metropolitans
QTY Required: 7
Ring Set Only, Standard. For Metropolitan
Ring set only, standard; Fits: 1200 engine
QTY Required: 1
Shift Lever Shaft Oil Seal For Metropolitan
Oil seal for shaft; Fits: All Metropolitans
QTY Required: 2
Tire Cover Black For Metropolitan
Tire cover, black piped in white or black vinyl; please specifiy. Fits: All Metropolitans
QTY Required: 1
Valve Guide Shroud For Metropolitan Cylinder Head
Shroud, valve guide; Fits: All Metropolitans
QTY Required: 8
Wiper Switch Knob For Metropolitan
Knob, wiper switch chrome, made by KMC artisans; Fits: All Metropolitans
QTY Required: 1
Door Retainer Center Right For Metropolitan
Retainer, center right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finishing Clip, Left For Metropolitan Backlight
Finishing clip, left (no longer available); Fits: Chassis # E13620 –
QTY Required: 1
Floor Pan – Front Right For Metropolitan
Floor pan, front right. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Main Bearing Cap Stud For 1G Engine Prefix Metropolitan Engine Block
Stud, main bearing cap; Fits: Chassis # to E11000
QTY Required: 6
Medallion Backing Plate For Early Metropolitan
Plate, backing for Nash and Hudson medallions. Fits: 540 Metropolitans
QTY Required: 1
Mount Plate, Right For Metropolitan Engines
Mount plate, right (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Oil Sump Plug For 1G Engine Prefix Metropolitan
Plug, drain (used); Fits: to Chassis # E11000
QTY Required: 1
Seal PLATE For Metropolitan Weather Eye
Seal plate for radiator pipes; Fits: All Metropolitans
QTY Required: 1
Valve Spring Cup (used) For Metropolitan Cylinder Head
Cup (used), valve spring; Fits: to Chassis # E11000
QTY Required: 8
Axle Swivel Thrust Washer For Metropolitan
Thrust washer, swivel axle; Fits: All Metropolitans
QTY Required: 2
Door Retainer Center Left For Metropolitan
Retainer, center left (used); Fits: All convertible Metropolitans
QTY Required: 1
Finish Moulding – Right For Metropolitan Backlight
Finish moulding, right (used); Fits: All Metropolitans
QTY Required: 1
Floor Pan – Rear Left For Metropolitan
Floor pan, rear left. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Main Bearing Cap Stud For Metropolitan Engine Block
Stud, main bearing cap; Fits: Chassis # E11001 –
QTY Required: 6
Mount Plate, Left For 1G Engine Prefix Metropolitan Engine
Mount plate, left (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Seal Plate GROMMET For Metropolitan Weather Eye
Grommet, for seal plate – rubber; Fits: All Metropolitans
QTY Required: 3
Valve Spring Cup For Metropolitan Cylinder Head
Cup, valve spring; Fits: Chassis # E11001 –
QTY Required: 8
A-Arm Upper Assembly Rebuild For Metropolitan
A-arm, upper (X) Please send in your unit to rebuild. ; Fits: All Metropolitans
QTY Required: 2
Clutch Withdrawal Lever Dust Boot For Metropolitan
Dust boot for clutch withdrawal lever; Fits: Chassis #E11001 –
QTY Required: 1
Door Retainer Rear Right For Metropolitan
Retainer, rear right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finish Moulding – Left For Metropolitan Backlight
Finish moulding, left (used); Fits: All Metropolitans
QTY Required: 1
Floor Pan – Rear Right For Metropolitan
Floor pan, rear right. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Generator Adjusting Link For Metropolitan
Adjusting link, generator; Fits: All Metropolitans
QTY Required: 1
Main Bearing Cap Stud Nut For 1G Engine Prefix Metropolitan Engine Block
Nut, stud main bearing cap; Fits: Chassis # to E11000
QTY Required: 6
Mount Plate, Left For Metropolitan Engines
Mount plate, left (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Speedometer Kilometers For Metropolitan
Speedometer, KPH – new old stock “Smiths” (odometer not included); Fits: All Metropolitans
QTY Required: 1
Valve Cotter (used) For 1G Engine Prefix Metropolitan Cylinder Head
Cotter (used) two halves; Fits: to Chassis # E11000
QTY Required: 16
Weatherstrip – Inner & Outer Door Top Moulding For Metropolitan
Weatherstrip, inner & outer; Fits: All Metropolitans
QTY Required: 4
A-Arm Upper Bumper For Metropolitan
Bumper, rubber, upper link arm; Fits: All Metropolitans
QTY Required: 2
Axle Case Vent For Metropolitan
Vent, breather assembly for axle case; Fits: All Metropolitans
QTY Required: 1
Buffer For 1G Engine Prefix Metropolitan Engine
Buffer, front engine mount, Made-to-order by KMC; please allow 1-2 weeks production. Buffers are critical in maintaining correct engine alignment. ; Fits: to Chassis # E11000
QTY Required: 2
Door Retainer Rear Left For Metropolitan
Retainer, rear left (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finish Moulding Clip For Metropolitan Backlight
Clip, finish moulding – new; Fits: All Metropolitans
QTY Required: 1
Front Valance For Early Metropolitan
Front valance (grille panel assembly – radiator lower). Sorry, no longer available.
QTY Required: 1
Main Bearing Cap Stud Nut For Metropolitan Engine Block
Nut, stud main bearing cap; Fits: Chassis # E11001 –
QTY Required: 6
Oil Dipstick For 1G Engine Prefix Metropolitan
Dipstick, rod oil dipper (used); Fits: to Chassis # E11000
QTY Required: 1
Speedometer Miles Per Hour For Metropolitan
Speedometer, MPH – new old stock “Smiths” (fuel guage not included); Fits: All Metropolitans
QTY Required: 1
Valve Cotter For Metropolitan Cylinder Head
Cotter, two halves; Fits: Chassis # E11001 –
QTY Required: 16
Weatherstrip – Roof Rail Seal For Metropolitan
Weatherstrip, roof rail seal; Fits: All Metropolitans
QTY Required: 2
A-Arm Lower Assembly For Metropolitan
A-arm, lower. This product is made by the original equipment manufacturer on original tooling; guarnateed to fit. ; Fits: All Metropolitans
QTY Required: 2
Buffer For Metropolitan Engines
Buffer, front engine mount, Made-to-order by KMC; please allow 1-2 weeks production. Buffers are critical in maintaining correct engine alignment. ; Fits: Chassis # #11001 –
QTY Required: 2
Cylinder Head Stud Long For 1G Engine Prefix Metropolitan Engine Block
Stud, long cylinder head; Fits: Chassis # to E11000
QTY Required: 4
Finish Moulding Screw For Metropolitan
Screw, finish moulding; Fits: All Metropolitans
QTY Required: 9
Main Bearing Set, Std. For Metropolitan
Main Bearing set, std. Fits: to Chassis # E11000
QTY Required: 1
Oil Dipstick For Metropolitan
Dipstick, rod oil dipper (used); Fits: Chassis # E11001 –
QTY Required: 1
Rear Cushion For EARLY Metroplitan
Cushion, rear – covered dense foam with hold down straps/snaps. Originally, sewn in Bedford Stripe piped in beige vinyl. Fits: 540 Metropolitans. Can sew to your specifications; please inquire. Sorry, no longer available.
QTY Required: 1
Valve Cotter Circlip For Metropolitan Cylinder Head
Circlip for valve cotter; Fits: All Metropolitans
QTY Required: 8
Weatherstrip – Door Seal Rubber For Metropolitan
Door seal – rubber, black, sold by the foot per door; Fits: All Metropolitans
QTY Required: 2
A-Arm Lower For Metropolitan
A-arm, lower. This product is an aftermarket copy, cheaper and lighter. We cannot guarantee fit or warranty on this product; Fits: All Metropolitans
QTY Required:
Axle Shaft Gasket For Metropolitan
Gasket, axle shaft to hub; Fits: All Metropolitans
QTY Required: 2
Blanking Plug – Lower Door For Metropolitan
Plug, lower door, rubber; Fits: All Metropolitans
QTY Required: 4
Cylinder Head Stud Long For Metropolitan Engine Block
Stud, long cylinder head; Fits: Chassis # E11001 –
QTY Required: 4
Finish Moulding Washer For Metropolitan
Finishing washer, moulding; Fits: All Metropolitans
QTY Required: 9
Hinge Pillar Assembly Repair Section – Left Side For Metropolitan
Hinge Pillar repair section – left. Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.002 For Metropolitan
Main Bearing set, std. 0.002; Fits: to Chassis # E11000
QTY Required: 1
Shim For 1G Engine Prefix Metropolitan Engine
Shim, front engine mount; Fits: to Chassis # E11000
QTY Required: 1
Stud For Metropolitan Cylinder Head
Stud, exhaust manifold to cylinder head; Fits: to Chassis # E11000
QTY Required: 2
Sunvisor For Metropolitan
Sunvisor (hardware not included) covered in off-white linen weave headlining material; Fits: All Metropolitans
QTY Required: 2
Blanking Plug – Upper Door For Metropolitan
Plug, upper door, rubber; Fits: All Metropolitans
QTY Required: 4
Cylinder Head Stud Short For 1G Engine Prefix Metropolitan Engine Block
Stud, short cylinder head; Fits: Chassis # to E11000
QTY Required: 7
Door Handle Exterior – Left For Metropolitan
Door handle, exterior left. High quality, hand casted, sanded, then triple chromed handle. Made by KMC in Texas. Fits: Chassis # E1001 – E48847
QTY Required: 1
Fulcrum Pin Welch Plug For Metropolitan
Plug, welch, fulcrum pin; Fits: All Metropolitans
QTY Required: 4
Hinge Pillar Assembly Repair Section – Right Side For Metropolitan
Hinge Pillar repair section – right. Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.01 For Metropolitan
Main Bearing set, std. 0.01; Fits: to Chassis # E11000
QTY Required: 1
Oil Dipstick Dust Cap For Metropolitan
Dust cap, oil dipper rod; Fits: Chassis # E11001 –
QTY Required: 1
Stud For Metropolitan Cylinder Head
Stud, exhaust manifold to cylinder head; Fits: Chassis # E11001 –
QTY Required: 2
Sunvisor Base Plate Bracket For Metropolitan
Base plate, sunvisor bracket; Fits: All Metropolitans
QTY Required: 2
Urethane Auto Glass Sealant, 10 oz (Black) (For Finishing Front & Rear Windscreen Installations) For Metropolitan
Urethane auto glass sealant, 10 oz (black) (for finishing front & rear windscreen installations); Fits: All Metropolitans
QTY Required: 1
Cylinder Head Stud Short For Metropolitan Engine Block
Stud, short cylinder head; Fits: Chassis # E11001 –
QTY Required: 7
Door Handle Exterior – Right With Lock Opening For Metropolitan
Fits: Chassis # E1001 – E48847
QTY Required: 1
Door Seal Super Weatherstrip Adhesive
Door seal super weatherstrip adhesive, 5 oz (black)
QTY Required: 1
Main Bearing Set, Std. 0.02 For Metropolitan
Main Bearing set, std. 0.02; Fits: to Chassis # E11000
QTY Required: 1
Rear Back Wood Frame For Metropolitan
Wood frame, rear back; Fits: All Metropolitans
QTY Required: 1
Rocker Shaft For 1G Engine Prefix Metropolitan Cylinder Head
Rocker shaft, authentic reproduction made by KMC ; Fits: to Chassis # E11000
QTY Required: 1
Trunnion For Nash Metropolitan Early
Trunnion (X20) Price includes a $20 core charge that is refunded once we receive your rebuildable core. Fits: to Chassis # E26872
QTY Required: 2
Door Handle Retainer Exterior For Metropolitan
Door handle retainer, exterior. High quality, hand casted, sanded, then triple chromed retainer. Made by KMC in Texas. Fits: Chassis # E1001 – E48847
QTY Required: 2
Front Crossmember Brace – Right For Metropolitan Engine
Brace, crossmember extension – right (used) sandblasted
QTY Required: 1
Main Bearing Set, Std. 0.03 For Metropolitan
Main Bearing set, std. 0.03; Fits: to Chassis # E11000
QTY Required: 1
Oil Pump Stud For 1G Engine Prefix Metropolitan Engine Block
Stud, oil pump to cylinder block; Fits: Chassis # to E11000
QTY Required: 3
Rear Back Padding, Rear Back For Metropolitan
Padding, rear back; Fits: All Metropolitans
QTY Required: 1
Slave Cylinder Repair Kit For Metropolitan
Repair kit, slave cylinder; Fits: All Metropolitans
QTY Required: 1
Door Handle Button For Metropolitan
Door handle button. High quality, hand casted, sanded, then triple chromed. Made by KMC in Texas. Fits: Chassis # E1001 – E48847
QTY Required: 2
Front Crossmember Brace – Left For Metropolitan Engine
Brace, crossmemeber extension – left (used) sandblasted
QTY Required: 1
Hood (Bonnet) Hinge – Left For Metropolitan
Bonnet hinge, left (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.04 For Metropolitan
Main Bearing set, std. 0.04; Fits: to Chassis # E11000
QTY Required: 1
Oil Pump Stud For Metropolitan Engine Block
Stud, oil pump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 2
Rear Back Lock & Key For Metropolitan
Lock with key that secures rear back to trunk well; Fits: All Metropolitans
QTY Required: 1
Rocker Shaft Plug For Metropolitan Cylinder Head
Plug, valve rocker shaft; Fits: All Metropolitans
QTY Required: 1
Slave Cylinder Bleed Screw For Metropolitan
Bleed screw, slave cylinder; Fits: Chassis #E11001 –
QTY Required: 1
Fuel Pump Stud For 1G Engine Prefix Metropolitan Engine Block
Stud, fuel pump to cylinder block; Fits: Chassis # to E11000
QTY Required: 2
Hood (Bonnet) Hinge – Right For Metropolitan
Bonnet hinge, right (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. For Metropolitan
Main Bearing set, std.; Fits: Chassis # E11001 –
QTY Required: 1
Rear Crossmember For 1G Engine Prefix Metropolitan Engine
Rear crossmember gearbox (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Rocker Shaft Bracket Tapped For 1G Engine Prefix Metropolitan Cylinder Head
Bracket, tapped rocker shaft (used); Fits: to Chassis # E11000
QTY Required: 1
Side Rod – Left & Right For Metropolitan
Side rod, left & right (Made by KMC to fit correctly; other aftermarket rods don't fit right inhibiting steering).; Fits: All Metropolitans
QTY Required: 2
Slave Cylinder Pushrod For Metropolitan
Pushrod, slave cylinder; Fits: All Metropolitans
QTY Required: 1
Trunnion Nut For Metropolitan
Nut, castlellated for trunnion; Fits: All Metropolitans
QTY Required: 2
Dash Insulation Panel For Metropolitan
Insulation panel, under dash/firewall; Fits: All Metropolitans
QTY Required: 1
Fuel Pump Stud For Metropolitan Engine Block
Stud, fuel pump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 2
Fulcrum Pin For Metropolitan
Fulcrum pin, link to swivel pin and trunnion link; Fits: All Metropolitans
QTY Required: 4
Hood (Bonnet) Prop assembly For Metropolitan
Bonnet prop assembly (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.01 For Metropolitan
Main Bearing set, std. 0.01; Fits: Chassis # E11001 –
QTY Required: 1
Rear Crossmember For Metropolitan Gearbox
Rear crossmember gearbox, authentic reproduction by Kip Motor Co. Fits: Chassis # E11001 –
QTY Required: 1
Rocker Shaft Bracket Tapped For Metropolitan Cylinder Head
Bracket, tapped; Fits: Chassis # E11001 –
QTY Required: 1
Slave Cylinder Pushrod Pin For Metropolitan
Pin, push rod to clutch withdrawal lever; Fits: Chassis #E11001 –
QTY Required: 1
Door Handle Gasket Set For Metropolitan
Gasket set, door handle; Fits: Chassis # E1001 – E48847
QTY Required: 1
Fulcrum Seal Ring Large For Metropolitan
Seal ring – large, fulcrum pin; Fits: All Metropolitans
QTY Required: 4
Gearbox Mounting Plate Dowel For Metropolitan Engine Block
Dowel, gearbox mounting plate; Fits: All Metropolitans
QTY Required: 2
Hood (Bonnet) Scoop Grille For Early Metropolitan
Grille, hood scoop chrome, authentic reproduction made by Kip Motor Co; Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.02 For Metropolitan
Main Bearing set, std. 0.02; Fits: Chassis # E11001 –
QTY Required: 1
Rear Crossmember Mount For Metropolitan Gearbox
Rear mount with bolts, authentic reproduction by Kip Motor Co.
QTY Required: 2
Rear Seat Back Strainer Seal For Metropolitan
Strainer seal – used on each side of rear seat back; Fits: All Metropolitans
QTY Required: 2
Rocker Shaft Bracket Plain For 1G Engine Prefix Metropolitan Cylinder Head
Bracket, plain (used); Fits: to Chassis # E11000
QTY Required: 3
Drain Tap For Metropolitan Engine Block
Drain tap, cylinder block; Fits: All Metropolitans
QTY Required: 1
Fulcrum Seal Ring, Small For Metropolitan
Seal ring – small, fulcrum pin; Fits: All Metropolitans
QTY Required: 4
Lock Pillar Assembly Repair Section – Left For Metropolitan
Lock Pillar repair section – left. Made of 16 ga 1018 steel, made-to-order; Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.03 For Metropolitan
Main Bearing set, std. 0.03; Fits: Chassis # E11001 –
QTY Required: 1
Rocker Shaft Bracket Plain For Metropolitan Cylinder Head
Bracket, plain; Fits: Chassis # E11001 –
QTY Required: 3
Seat Belt Black With Chrome Buckle For Metropolitan
Seat Belt, black with chrome buckle; Fits: All Metropolitans
QTY Required: 2
Steering Wheel Recast For Metropolitan
Steering wheel (X150) Price includes a $150 core charge that is refunded once we receive your rebuildable core. To create a refurbished steering wheel, we remove the old, cracked pastic from the rim and sandblast wheel down to bare metal, cast on a new urethane rim, then finish off the hub and spokes with a durable high gloss urethane black paint for that factory fresh look and feel. Fits: All Metropolitans
QTY Required: 1
Door Handle Interior For Metropolitan
Door handle chrome, interior; Fits: All Metropolitans
QTY Required: 2
Fulcrum Plug Screwed For Metropolitan
Plug, screwed, fulcrum pin; Fits: All Metropolitans
QTY Required: 4
Lock Pillar Assembly Repair Section – Right For Metropolitan
Lock Pillar repair section – right. Made of 16 ga 1018 steel, made-to-order; Fits: All Metropolitans
QTY Required: 1
Main Bearing Set, Std. 0.04 For Metropolitan
Main Bearing set, std. 0.04; Fits: Chassis # E11001 –
QTY Required: 1
Rear Crossmember Shim For Metropolitan Engine
Shim, rear gearbox mounting crossmember
QTY Required: 1
Rocker Spacing Spring For 1G Engine Prefix Metropolitan Cylinder Head
Spring, rocker spacing (used); Fits: to Chassis # E11000
QTY Required: 3
Steering Wheel Lockwasher For Metropolitan
Lockwasher, steering wheel nut; Fits: All Metropolitans
QTY Required: 1
Connecting Rod, 1 & 3 (used) For Metropolitan
Connecting rod, 1 & 3 (used); Fits: 1G engine prefix
QTY Required: 2
Mounting Plate For 1G Engine Prefix Metropolitan Engine
Mounting plate (used), front; Fits: Chassis # to E11000
QTY Required: 1
Repair Section – Front Seat Riser For Metropolitan
Repair section, front seat riser. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Rocker Spacing Spring For Metropolitan Cylinder Head
Spring, rocker spacing; Fits: Chassis # E11001 –
QTY Required: 3
Connecting Rod, 1 & 3 (used) For Metropolitan
Connecting rod, 1 & 3 (used); Fits: 2G engine prefix
QTY Required: 2
Mounting Plate For Metropolitan Engine
Mounting plate (used), front; Fits: Chassis # E11001 –
QTY Required: 1
Repair Section – Handbrake Bracket For Metropolitan
Repair section, handbrake bracket. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Rocker For 1G Engine Prefix Metropolitan Cylinder Head
Rocker for valve bushed (used); Fits: to Chassis # E11000
QTY Required: 8
Steering Column Grommet For Metropolitan
Grommet, steering column and gear shift rod through floorboard; Fits: All Metropolitans
QTY Required: 1
Fulcrum Lockpin Lockwasher For Metropolitan
Lockwasher, lockpin; Fits: All Metropolitans
QTY Required: 4
Mounting Plate Gasket For Metropolitan
Gasket, mounting plate to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Rocker For Metropolitan Cylinder Head
Rocker for valve bushed ; Fits: Chassis # E11001 –
QTY Required: 8
Roof assembly For Metropolitan
Roof assembly (used); Fits: All Hardtop Metropolitans (542/562)
QTY Required: 1
Steering Column Cushion For Metropolitan
Cushion, steering column upper support – rubber; Fits: All Metropolitans
QTY Required: 1
Connecting Rod, 2 & 4 (used) For Metropolitan
Connecting rod, 2 & 4 (used); Fits: 1G engine prefix
QTY Required: 2
Door Handle Interior Spring For Metropolitan
Spring, interior door handle; Fits: All Metropolitans
QTY Required: 2
Rocker Bush For Metropolitan Cylinder Head
Bush for valve rocker; Fits: to Chassis # E11000
QTY Required: 8
Sill – Left Or Right For Metropolitan
Sill outer, left or right. Made of 16 ga 1018 steel, laser cut; Fits: All Metropolitans
QTY Required: 2
Steering Column Retainer For Metropolitan
Retainer, steering column cushion; Fits: All Metropolitans
QTY Required: 1
Connecting Rod, 2 & 4 (used) For Metropolitan
Connecting rod, 2 & 4 (used); Fits: 2G engine prefix
QTY Required: 2
Sill Assembly – Left Inner For Metropolitan
Sill Assembly, left inner reinforcement. Made of 16 ga 1018 steel, laser cut and folded; Fits: All Metropolitans
QTY Required: 1
Steering Column Bolt For Metropolitan
Bolt, upper steering column support; Fits: All Metropolitans
QTY Required: 2
Tappet Adjusting Screw For 1G Engine Prefix Metropolitan Cylinder Head
Adjusting screw (used); Fits: Chassis # E11001 –
QTY Required: 8
Sill Assembly – Right Inner For Metropolitan
Sill Assembly, right inner reinforcment. Made of 16 ga 1018 steel, laser cut and folded; Fits: All Metropolitans
QTY Required: 1
Tappet Adjusting Screw For Metropolitan Cylinder Head
Adjusting screw; Fits: Chassis # E11001 –
QTY Required: 8
Connecting Rod Cap Bolt For 1G Engine Prefix Metropolitan
Bolt, connecting rod cap; Fits: to Chassis # E11000
QTY Required: 8
Front Spindle (Swivel Axle) Oil Seal For Metropolitan
Oil seal, swivel axle; Fits: All Metropolitans
QTY Required: 2
Tappet Nut For Metropolitan Cylinder Head
Nut, tappet adjusting screw; Fits: to Chassis # E11000
QTY Required: 8
Connecting Rod Cap Bolt For Metropolitan Engine
Bolt, connecting rod cap; Fits: Chassis # E11001 –
QTY Required: 8
Front Spindle (Swivel Axle) Bearing Outer For Metropolitan
Bearing, outer on swivel axle; Fits: All Metropolitans
QTY Required: 2
Tappet Nut For Metropolitan Cylinder Head
Nut, tappet adjusting screw; Fits: Chassis # E11001 –
QTY Required: 9
Tie Down Bracket For Metropolitan
Bracket, tie down; authentic reprodcution, Fits: All Metropolitans
QTY Required: 2
Bumper, Center Axle Stop For Metropolitan
Bumper, center sometimes referred to as an axle stop
QTY Required: 1
Connecting Rod Cap Lockplate For Metropolitan
Lockplate, connecting rod cap; Fits Chassis # E11001-
QTY Required: 4
Front Spindle (Swivel Axle) Distance Piece For Metropolitan
Distance piece for bearing; Fits: All Metropolitans
QTY Required: 2
Rocker Shaft Locating Screw For Metropolitan Cylinder Head
Locating screw rocker shaft; Fits: Chassis # E11001 –
QTY Required: 1
Bumper, Outer Axle Stop For Metropolitan
Bumper, outer sometimes referred to as an axle stop
QTY Required: 2
Connecting Rod Clamp Bolt For 1G Engine Prefix Metropolitan
Bolt, connecting rod clamp; Fits: to Chassis # E11000
QTY Required: 4
Front Spindle (Swivel Axle) Bearing, Inner For Metropolitan
Bearing, inner on swivel axle; Fits: All Metropolitans
QTY Required: 2
Rocker Shaft Locating Plate For Metropolitan Cylinder Head
Locating plate for rocker shaft screw; Fits: Chassis # E11001 –
QTY Required: 1
Windshield Pillar Repair Section – Left Side For Metropolitan
Windshield pillar repair section – left side (does not come with pillar). Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Connecting Rod Clamp Bolt For Metropolitan Engines
Bolt, connecting rod clamp; Fits: Chassis # E11001 –
QTY Required: 4
Front Spindle (Swivel Axle) Washer For Metropolitan
Washer, swivel axle; Fits: All Metropolitans
QTY Required: 2
Rocker Shaft Washer For Metropolitan Cylinder Head
Washer rocker shaft; Fits: All Metropolitans
QTY Required: 2
Windshield Pillar Repair Section – Right Side For Metropolitan
Windshield pillar repair section – right side (does not come with pillar). Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Connecting Rod Clamp Bolt Lockwasher For Metropolitan
Lockwasher, connecting rod clamp bolt; Fits: All Metropolitans
QTY Required: 4
Front Spindle (Swivel Axle) Nut For Metropolitan
Nut, swivel axle; Fits: All Metropolitans
QTY Required: 2
Head Gasket For 1G Engine Prefix Metropolitan
Head gasket; Fits: to Chassis # E11000
QTY Required: 1
Front Spindle (Swivel Axle) Oil Cover For Metropolitan
Cover, oil retaining ; Fits: All Metropolitans
QTY Required: 2
Rod Bearing Set, Standard For 1G Engine Prefix Metropolitan
Rod Bearing set, std.; Fits: to Chassis # E11000
QTY Required: 1
Rod Bearing Set, 0.01 For 1G Engine Prefix Metropolitan
Rod Bearing set, 0.01; Fits: to Chassis # E11000
QTY Required: 1
Steering Lever – Righthand For Metropolitan
Steering lever, Righthand (used); Fits: to Chassis # E27427
QTY Required: 1
Rod Bearing Set, 0.02 For 1G Engine Prefix Metropolitan
Rod Bearing set, 0.02; Fits: to Chassis # E11000
QTY Required: 1
Rod Bearing Set, 0.03 For 1G Engine Prefix Metropolitan
Rod Bearing set, 0.03; Fits: to Chassis # E11000
QTY Required: 1
Steering Lever – Lefthand For Metropolitan
Steering lever, Lefthand (used); Fits: to Chassis # E27427
QTY Required: 1
Stud Washer For Metropolitan Cylinder Head
Washer, cylinder head stud; Fits: All Metropolitans
QTY Required: 11
Rod Bearing Set, 0.04 For 1G Engine Prefix Metropolitan
Rod Bearing set, 0.04; Fits: to Chassis # E11000
QTY Required: 1
Stud Nut For Metropolitan Cylinder Head
Nut, cylinder head stud; Fits: to Chassis # E11000
QTY Required: 11
Rod Bearing Set, Standard For Metropolitan
Rod Bearing set, standard; Fits: Chassis # E11001 –
QTY Required: 1
Stud Nut For Metropolitan Cylinder Head
Nut, cylinder head stud; Fits: Chassis # E11001 –
QTY Required: 11
Rod Bearing Set, 0.01 For Metropolitan
Rod Bearing set, 0.01; Fits: Chassis # E11001 –
QTY Required: 1
Temperature Transmitter Plug For Metropolitan Cylinder Head
Plug (used), thermal transmitter boss; Fits: to Chassis # E11000
QTY Required: 1
Rod Bearing Set, 0.02 For Metropolitan
Rod Bearing set, 0.02; Fits: Chassis # E11001 –
QTY Required: 1
Temperature Transmitter Plug For Metropolitan Cylinder Head
Plug (used), thermal transmitter boss; Fits: Chassis # E11001 –
QTY Required: 1
Plug Washer For Metropolitan Cylinder Head
Washer, for plug; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing Set, 0.03 For Metropolitan
Rod Bearing set, 0.03; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing Set, 0.04 For Metropolitan
Rod Bearing set, 0.04; Fits: Chassis # E11001 –
QTY Required: 1
Valve Cover For 1G Engine Prefix Metropolitan Cylinder Head
Valve cover (used); Fits: to Chassis # E11000
QTY Required: 1
Crankshaft Reground For 1G Engine Prefix Metropolitan
Crankshaft (X195) Price includes $195 core chargethat is refunded once we receive your rebuildable core. Reground when ordered; production time 1-2 weeks.
QTY Required: 1
Valve Cover Primed For Metropolitan Cylinder Head
Valve cover (used), sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft Reground For 2G Engine Prefix Metropolitan
Crankshaft (X195) Price includes $195 core charge that is refunded once we receive your rebuildable core. Reground when ordered; production time 1-2 weeks.
QTY Required: 1
Valve Cover For Metropolitan Cylinder Head
Valve cover (used), not sandblasted; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft Reground For 2G+ Engine Prefix For Metropolitan
Crankshaft (X195) Price includes $195 core charge that is refunded once we receive your rebuildable core. Regound when ordered; production time 1-2 weeks.
QTY Required: 1
Valve Cover Cap & Cable For Metropolitan Cylinder Head
Cap & cable for oil filler; Fits: All Metropolitans
QTY Required: 1
Crankshaft Pilot Bush For Metropolitan
Pilot bushing 1st motion shaft; Fits: All Metropolitans
QTY Required: 1
Valve Cover Gasket For 1G Engine Prefix Metropolitan Cylinder Head
Valve cover gasket; Fits: to Chassis # E11000
QTY Required: 1
Crankshaft Bolt For 1G Engine Prefix Metropolitan
Bolt (used), crankshaft to flywheel; Fits: to Chassis # E11000
QTY Required: 6
Valve Cover Gasket For Metropolitan Cylinder Head
Valve cover gasket; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft Bolt For Metropolitan
Bolt, crankshaft to flywheel; Fits: Chassis # E11001 –
QTY Required: 6
Valve Cover Bushing For Metropolitan Cylinder Head
Bushing, valve cover; Fits: All Metropolitans
QTY Required: 2
Crankshaft Bolt Locktab For Metropolitan
Locktab, crankshaft bolt; Fits: All Metropolitans
QTY Required: 3
Valve Cover Washer For Metropolitan Cylinder Head
Washer, valve cover nut; Fits: All Metropolitans
QTY Required: 2
Crankshaft Bolt Nut For 1G Engine Prefix Metropolitan
Nut, crankshaft to flywheel bolt; Fits: to Chassis # E11000
QTY Required: 6
Valve Cover Spacer For Metropolitan Cylinder Head
Distance piece or spacer, valve cover nut; Fits: All Metropolitans
QTY Required: 2
Crankshaft Bolt Nut For Metropolitan
Nut, crankshaft to flywheel bolt; Fits: Chassis # E11001 –
QTY Required: 6
Valve Cover Nut For 1G Engine Prefix Metropolitan Cylinder Head
Nut, valve cover ; Fits: to Chassis # E11000
QTY Required: 2
Valve Cover Nut For Metropolitan Cylinder Head
Nut, valve cover ; Fits: Chassis # E11001 –
QTY Required: 2
Crankshaft Gear Key For Metropolitan
Key for crankshaft gear; Fits: All Metropolitans
QTY Required: 2
Heater Elbow to Cylinder Head For Metropolitan
Elbow (used), heater outlet to cylinder head; Fits: All Metropolitans
QTY Required: 1
Crankshaft Gear Packing Washer For Metropolitan
Packing washer for gear key; Fits: All Metropolitans
QTY Required: 1
Heater Elbow Gasket For Metropolitan Cylinder Head
Gasket, heater elbow to cylinder head
QTY Required: 1
Heater Return Pipe For 1G Engine Prefix Metropolitan
Return pipe (used) – copper; Fits: to Chassis # E11000
QTY Required: 1
Heater Return Pipe For Metropolitan Cylinder Head
Return pipe (used) – copper; Fits: Chassis # E11001 –
QTY Required: 1
Thrust Bearing Set For 1G Engine Prefix Metropolitan
Thrust Bearing set; Fits: to Chassis # E11000
QTY Required: 1
Camshaft Reground For 1G Engine Prefix Metropolitan
Camshaft (X95). Price includes a $95 core charge that is refunded once we receive your rebuildable core. Reground and polished camshaft is ready to install; Fits: to Chassis # E11000
QTY Required: 1
Camshaft Reground For Metropolitan
Camshaft (X50). Price includes a $50 core charge that is refunded once we receive your rebuildable core. Reground and polished camshaft is ready to install; Fits: Chassis # E11001 –
QTY Required: 1
Camshaft Bearing Set For 1G Engine Prefix Metropolitan
Camshaft bearing set; Fits: to Chassis # E11000
QTY Required: 1
Camshaft Bearing Set For Metropolitan
Camshaft bearing set; Fits: Chassis # E11001 –
QTY Required: 1
Camshaft Locating Plate For Metropolitan
Locating plate, camshaft; Fits: Chassis # E11001 –
QTY Required: 1
Camshaft Gear Locktab For Metropolitan
Locktab, camshaft gear; Fits: Chassis # E11001 –
QTY Required: 1
Timing Chain Tensioner For Metropolitan
Tensioner with backplate; Fits: Chassis # E11001 –
QTY Required: 1
Timing Chain Tensioner Locktab For Metropolitan
Locktab for tensioner; Fits: Chassis # E11001 –
QTY Required: 1
Flywheel Refurbished For 1G Engine Prefix Metropolitan
Flywheel (X85) Refurbished, ready to install. Price includes a $85 core charge that is refunded once we receive your rebuildable core. Fits: 1G prefix engines
QTY Required: 1
Flywheel Refurbished For 2G Engine Prefix Metropolitan
Flywheel (X75) refurbished ready to install. Price includes a $75 core charge that is refunded once we receive your rebuildable core. Fits: 2G prefix engines
QTY Required: 1
Ring Gear For 1G Engine Prefix Metropolitan
Ring gear, starter; Fits: to Chassis # E11000
QTY Required: 1
Tappet Re-Surfaced For Metropolitan
Tappet (X) Exchange only. Please send in old tappets to be resurfaced. Fits: to engine # 1H142718
QTY Required: 8
Pushrod For 2G + Engine Prefix Metropolitan
Pushrod (used); Fits: 2G prefix engine to 1H142718
QTY Required: 8
Crankshaft Pulley For Metropolitan
Pulley, crankshaft (used); Fits: Engine # to 2G14667
QTY Required: 1
Crankshaft Pulley Locktab For Metropolitan
Locktab, crankshaft pulley; Fits: All Metropolitans
QTY Required: 1
Crankshaft Starting Jaw Nut For Metropolitan
Starting jaw nut for crankshaft (used); Fits: to Chassis # E11000
QTY Required: 1
Crankshaft Starting Jaw For Metropolitan
Starting jaw nut for crankshaft ; Fits: Chassis # E11001 –
QTY Required: 1
Plastigauge, Sleeve For Main & Rod Bearing Clearances Metropolitan
Plastigauge, sleeve (critical for measuring main and rod bearing clearances during engine assembly)
QTY Required: 1
#105 Motor Assembly Lube For Metropolitan
#105 Motor Assembly Lube, 10 oz (Oil soluble white grease for general engine assembly)
QTY Required: 1