Air Baffle – Center Support For Metropolitan
Air baffle radiator, center support (used); Fits: All Metropolitans
QTY Required: 1
Air baffle radiator, center support (used); Fits: All Metropolitans
QTY Required: 1
Ashtray assembly with Airflyte lined lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front right (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back plate, rear right (used -limited supply) Fits: Chassis # E1001 – E29283
QTY Required: 1
Hold down bracket for battery; Fits: All Metropolitans
QTY Required: 1
Master brake cylinder, 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Brake line pipe, wheel cylinder to wheel cylinder, front brakes; Fits: All Metropolitans
QTY Required: 2
Cable, switch/starter
QTY Required: 1
CASTROL DOT 4 Brake Fluid, 12 oz.
NOTE: USE ONLY CASTROL DOT 4 BRAKE FLUID!
The seals & hoses in your brake system are made from natural rubber which is only compatible with vegetable based brake fluid. Castrol DOT 4 is the only fluid generally available in the United States. Use of improper or mixing of fluids can lead to complete brake failure. Fits: Most British Vehicle except Rolls Royce/Bentley
QTY Required: 4
Top frame assembly, fabricated by Kip Motor Co., made-to-order. May include an oversize shipping charge. Fits: to Chassis # E71275
QTY Required: 1
Cowl vent assembly (used); Fits: All Metropolitans
QTY Required: 1
Dip switch; Fits: All Metropolitans
QTY Required: 1
Glass, door *Fragile surcharge of $85 will be added to shipping, please see shipping details. ; Fits: All Metropolitans with NO vent window
QTY Required: 2
Hinge, right (used); Fits: All Metropolitans
QTY Required: 2
Front bumper ,(X) Send in your front bumper so we can repair, strip and then re-chrome. Depending on condition, there maybe an additional surcharge for repairs. At times, we do have a cores. Please inquire; Fits: All Metropolitans
QTY Required: 1
Floor mat, front (rubber); Fits: All Metropolitans
QTY Required: 1
Fuel tank (X) Please send in your tank for refurbishing, sorry no cores are available. Tank is drained, cleaned and evaluated. Some tanks are rusting from the inside out so we cut them in half, scrap out the rust; treat and seal. Once dry, we make any repairs to exterior and plug up any pin holes. Weld two halves back together, sandblast exterior, prime and paint black. There may be additional charge depending on the condition of the tank. Refurbished tanks are far superior to any ‘conversion’ tank as those do not fit well and are not sealed on the inside.
QTY Required: 1
Fulcrum pin, link arm to body; Fits: All Metropolitans
QTY Required: 8
Shift lever (X) Please send in your shift lever to be rebuilt. Sorry, no cores available. Fits: All Metropolitans
QTY Required: 1
Generator – 22258 (X175) Price includes a $175 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge. Fits: 540/560 Metropoltans
QTY Required: 1
Handbrake lever assembly (X) Please send in your handbrake assembly to be refurbished. No cores available.
QTY Required: 1
Headlamp assembly, includes sealed beam headlight assembly, gaskets, and headlamp door (rim); Fits: All Metropolitans
QTY Required: 2
Horn low note windtone; Fits: All Metropolitans
QTY Required: 1
Jack NOS still wrapped in BMC branded wax paper. Handle sold separately. Fits: All Metropolitans
QTY Required: 1
Chassis serial # plate. Authentic reproduction. Please let us know your Chassis number (starts with an “E”) and we’ll stamp plate.
QTY Required: 1
Factory Parts catalog; photocopied and plastic comb bound with card stock cover. Features exploded views for Series I, II, III, and IV Metropolitan. US Version.
QTY Required: 1
Rear view mirror with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Clip, for moulding trim
QTY Required: 34
Oil filter element; Fits: All Metropolitans
QTY Required: 1
RADIO (X) Please send in your radio for rebuilding to oringal AM specifications. Allow 3-4 weeks. Fits: All Metropolitans
QTY Required: 1
Rear bumper, re-chrome (X). Send in your bumper for repair and re-chroming. Depening on condition, there maybe an additional charge for repairs and stripping; Fits: All Metropolitans
QTY Required: 1
Shock absorber, front with mounting hardware; Fits: All Metropolitans
QTY Required: 2
Starter (X) Please send in your core to be rebuilt, 1-2 week turnaround. ; Fits: All Metropolitans
QTY Required: 1
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Tail lamp assembly (X) Sorry, no cores available; please send in your assembly to be refurbished. Tail lens, gasket, bulbs, and wiring are replaced. Fits: All Metropolitans
QTY Required: 2
Glass, windshield *Crate surcharge of $85 is included in the price. Please see shipping note.
QTY Required: 1
Wiper motor (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Accelerator pedal; Fits: Met Chassis # E11001-
QTY Required: 1
Air baffle radiator, left (used); Fits: All Metropolitans
QTY Required: 1
Air cleaner oil bath assembly (used), limited availability. Fits: 560 Metropolitans
Note: Use about 1 cup of 30 weight oil.
QTY Required: 1
Ashtray assembly with Airflyte pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front right (used); sandblasted and primed. Fits: Chassis # E29284 –
QTY Required: 1
Back plate, rear right (used). Sorry, no longer available. Fits: Chassis # E29284 –
QTY Required: 1
Bearing, ball journal; Fits: Chassis #E11001 –
QTY Required: 1
Battery box; Fits: All Metropolitans
QTY Required: 1
Brake hose, flexible, front brakes; Fits: All Metropolitans
QTY Required: 2
Master brake cylinder, 5/8″; Fits: Chassis # E29284 –
QTY Required: 1
Bushing, fulcrum pin; Fits: All Metropolitans
QTY Required: 16
Cable, battery negative to starter switch with lug and eyelets
QTY Required: 1
Brake fluid CASTROL DOT 4, QT
NOTE: USE ONLY CASTROL DOT 4 BRAKE FLUID!
The seals & hoses in your brake system are made from natural rubber which is only compatible with vegetable based brake fluid. Castrol DOT 4 is the only vegetable based fluid generally available in the United States. Use of improper or mixing of fluids can lead to complete brake failure.; Fits: Most British Vehicles except Rolls Royce/Bentley
QTY Required: 1
Clip, retaining bonnet safety catch; Fits: All Metropolitans
QTY Required: 1
Top frame assembly, fabricated by Kip Motor Co., made-to-order. May include an oversize shipping charge. Fits: Chassis # E71276 –
QTY Required: 1
Screen for ventilator ; Fits: All Metropolitans
QTY Required: 1
Front cover (used) sandblasted; Fits: Chassis # E11001 –
QTY Required: 1
Differential assembly, 9/41 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core.Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Gasket, dip switch; Fits: All Metropolitans
QTY Required: 1
Glass, door *Fragile surcharge of $85 will be added to shipping, please see shipping note. ; Fits: All Metropolitans with vent windows
QTY Required: 2
Hinge, left (used); Fits: All Metropolitans
QTY Required: 2
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E11000 – E28705
QTY Required: 1
Exhaust manifold, sorry, no longer available.
QTY Required: 1
Exhaust pipe; Fits: Chassis # E11001 –
QTY Required: 1
Overrider, chrome; Fits: All Metropolitans
QTY Required: 4
Fuel pump (X); Fits: Chassis # E11001 -. Sorry, no decent cores available; please send in your pump for rebuilding. Please empty out all fluids, wap in plastic before packagin.
QTY Required: 1
Drain plug
QTY Required: 1
Gearbox (X295); Fits: Chassis # E11001 – E27904. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Pivot pin to operating shaft yoke; Fits: All Metropolitans
QTY Required: 1
Generator – 22700 (X175) Price includes a $175 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge. Fits: 560 Metropolitan
QTY Required: 1
Connector for handbrake; Fits: All Metropolitans
QTY Required: 1
Door, headlamp (rim); Fits: All Metropolitans
QTY Required: 2
Horn high note windtone; Fits: All Metropolitans
QTY Required: 1
Jack handle, metal made by KMC to fit the BMC jack. Fits: All Metropolitans
QTY Required: 1
Body # plate. Authentic reproduction. Please let us know your body number to stamp on plate in order comments.
QTY Required: 1
Side mirror, door mounting with hardware; Fits: All Metropolitans
QTY Required: 1
Bolt, for moulding trim
QTY Required: 14
Center bolt; Fits: 1500 Met Engines
QTY Required: 1
Driving gear, oil pump; Fits: Chassis # E11001 –
QTY Required: 1
Radiator (X65) re-cored and painted. Price includes a $45 core charge that is refunded once we receive your rebuildable core. May incurr an oversize shipping fee. Fits: 560 Metropolitan
QTY Required: 1
Radio antenna, Fits: All Metropolitans
QTY Required: 1
Bracket, right (used); Fits: All Metropolitans
QTY Required: 1
Floor mat, rear (rubber); Fits: All Metropolitans
QTY Required: 1
Glass, 3 pc center (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Shock absorber, rear with mounting hardware; Fits: All Metropolitans
QTY Required: 2
Drive gear (pinion and sleeve); Fits: All Metropolitans
QTY Required: 1
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Screw, for tail light assembly to body; Fits: All Metropolitans
QTY Required: 2
Hinge set chrome, left & right. Hand casted, sanded, then triple chromed. Made by KMC craftsmen. Fits: All Metropolitans
QTY Required: 1
Upholstery kit MID MET- BLACK & WHITE HOUNDSTOOTH (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion, wheelhouse covers, and button.) Made-to-order, please allow 2 week production. Please order the 811 PAD kit that contains all the padding for new upholstery set. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitans with NO Vent Windows.
QTY Required: 1
Water pump with key hub (X) Please send in your pump to be rebuilt. Sorry, no cores available. Fits: Chassis # E11001-
QTY Required: 1
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the order.
QTY Required: 1
Wiper gearbox (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Air baffle radiator, lower. Sorry, no longer available; Fits: All Metropolitans
QTY Required: 1
Gasket, element sealing; Fits: 560 Metropolitans
QTY Required: 1
Ashtray assembly with Pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front left (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back plate, rear left (used), sorry, no longer available. Fits: Chassis # E1001 – E29283
QTY Required: 1
Cover, battery box (used); Fits: All Metropolitans
QTY Required: 1
Repair kit for brake master cylinder 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Grommet, cable through battery box
QTY Required: 1
Carburettor, C-1528 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: 1H Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Rebuilt clutch cover assembly (X85).Price includes $85 core charge and will be refunded when KMC receives your rebuildable core. Fits: 1500 Met Engine
QTY Required: 1
Bracket coil to generator; Fits: All Metropolitans
QTY Required: 1
Top seal, rubber; Fits: All 541/561 Convertible Metropolitans
QTY Required: 1
Clip, weatherstrip cowl; Fits: All Metropolitans
QTY Required: 8
Ring, felt front cover; Fits: All Metropolitans
QTY Required: 1
Cylinder head assembly (X325).
A rebuilt cylinder head assembly that includes all components shown in photograph.
A core charge of $325 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on que. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For “1500” engines.
QTY Required: 1
Differential assembly, 9/38 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core. Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Slide channel sorry, not currently available; Fits: All Metropolitans
QTY Required: 2
Screw, hinge door and body; Fits: All Metropolitans
QTY Required: 28
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E28706-
QTY Required: 1
1H Prefix Engine Assembly (X300)
A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on condition of engine and production backlog. Extra crate charge for shipping on pallet via motor freight, FOB Dallas.
QTY Required: 1
Manifold/pipe clamp assembly; Fits: Chassis # E11001 –
QTY Required: 1
Beading, fender joint fits left or right fender; Fits: All Metropolitans
QTY Required: 2
Flasher lamp unit; Fits: All Metropolitans
QTY Required: 1
Overrider gasket set (rubber); Fits: All Metropolitans
QTY Required: 1
Repair kit, for fuel pump. Save money and rebuild your own pump! Fits: All Metropolitans
QTY Required: 1
Washer, for drain plug
QTY Required: 1
Gearbox (X295); Fits: Chassis # E27905 – E28705. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Knob, gearshift – black; Fits: All Metropolitans
QTY Required: 1
Brush set, generator #22258
QTY Required: 1
Clevis pin connector to lever; Fits: All Metropolitans
QTY Required: 3
Dust excluder, rubber; Fits: All Metropolitans
QTY Required: 2
Bracket to chassis, righthand (used); Fits: All Metropolitans
QTY Required: 1
Met 1500 Service Manual – features Late Met illustrations. Photocopied and plastic comb bound with cardstock cover. Ideal for shop use. UK Version, Series III & IV (560)
QTY Required: 1
Engine # plate. Authntic reproduction. Please let us know your engine # to stamp on plate.
QTY Required: 1
Side mirror, fender mounting – Left hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Needle bearing roller; Fits: Chassis #E11001 –
QTY Required: 18
Seal washer; Fits: 1500 Met Engines
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in black/white automotive vinyl), clips & screws required for one car. Click here for details and photos. Fits: 561 Convertible with NO vent window. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Cap, radiator; Fits: All Metropolitans
QTY Required: 1
Radio knob set, includes left and right, inner & outer knobs, indicator and pointer. Made by Kip Motor Company. Fits: All Metropolitans
QTY Required: 1
Bracket, left (used); Fits: All Metropolitans
QTY Required: 1
Floor mat, right side (rubber); Fits: All Metropolitans
QTY Required: 1
Safety catch; Fits: All Metropolitans
QTY Required: 1
Bushing drive end; Fits: All Metropolitans
QTY Required: 1
Bushing, steering box outer column; Fits: All Metropolitans
QTY Required: 2
Tail lens, authentic reproduction by KMC artisans, red; Fits: All Metropolitans
QTY Required: 2
Tool bag, heavy duty black vinyl with snap; Fits: All Metropolitans
QTY Required: 1
Gasket set, trunk hinge; Fits: All Metropolitans
QTY Required: 1
Upholstery kit MID MET -AUTHENTIC WOVEN HOUNDS-TOOTH. Made of a higher quality nubby hounds-tooth that is equivalent to original fabric. (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion , wheel house covers and buttons). Please order the 811 PAD kit for new padding. Made-to-order, please allow 2 week production. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitan with NO vent windows.
QTY Required: 1
Washer, fulcrum pin; Fits: All Metropolitans
QTY Required: 8
Water pump with press hub; Fits: Chassis # E11001 –
QTY Required: 1
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the item.
QTY Required: 1
Wiper wheelbox/cable assembly (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Arm, accelerator (used); sandblased and primed; Fits: Met Chassis # E11001-E33239
QTY Required: 1
Air baffle radiator, right (used); Fits: All Metropolitans
QTY Required: 1
Insulator, rubber; Fits: 560 Metropolitans
QTY Required: 1
Lid only, ashtray Airflyte lined, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Axle case (used); Fits: to Chassis # E26992
QTY Required: 1
Back plate, front left (used); sandblasted and primed. Fits: Chassis # E29284 –
QTY Required: 1
Back plate, rear left (used), sorry, no longer available. Fits: Chassis # E29284 –
QTY Required: 1
Repair kit for brake master cylinder 5/8″; Fits: Chassis # E29284 –
QTY Required: 1
Brake line pipe, front RIGHT to 4-way connector; Fits: All Metropolitans
QTY Required: 1
Cable, battery positive to ground with lug and eyelets
QTY Required: 1
Carburettor, C-1630 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: A/C/FNH Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Retainer. Sorry, not currently available. Fits: 560 Metroplitans
QTY Required: 3
Coil, ignition; Fits: All Metropolitans
QTY Required: 1
Retainer for top seal; Fits: All 541/561 Convertible Metropolitans
QTY Required: 2
Weatherstrip, cowl – rubber; Fits: All Metropolitans
QTY Required: 1
Check strap; Fits: All Metropolitans
QTY Required: 2
Felt Liner, slide channel; Fits: All Metropolitans
QTY Required: 1
A/C/FNH Engine Assembly (X300) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending production backlog. Additional crate charge for shipping on pallet via motor freight, FOB Dallas, Tx.
QTY Required: 1
“Metropolitan” Fenderscript. Hand casted, sanded, then triple chromed by KMC craftsmen; Fits: All Metropolitans
QTY Required: 1
Seating bracket for overrider; Fits: All Metropolitans
QTY Required: 4
Pickup tube (X) Please send in your core to be refurbished.
QTY Required: 1
Fuse, 35A for circuits; Fits: All Metropolitans
QTY Required: 2
Gearbox (X295); Fits: Chassis # E28706-E59047. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight. Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Knob, gearshift – cream; Fits: All Metropolitans
QTY Required: 1
Brush set, generator #22700
QTY Required: 1
Cable for handbrake; Fits: All Metropolitans
QTY Required: 1
Retainer for light unit; Fits: All Metropolitans
QTY Required: 2
Bracket to chassis, lefthand (used); Fits: All Metropolitans
QTY Required: 1
Intake manifold (used); Fits: Chassis # E11001 –
QTY Required: 1
Layshaft; Fits: Chassis #E11001 –
QTY Required: 1
Floor mat, left side (rubber); Fits: All Metropolitans
QTY Required: 1
Locknut, fulcrum pin; Fits: All Metropolitans
QTY Required: 8
Patent plate, valve cover
QTY Required: 1
Side mirror, fender mounting – Right hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Collar central bolt (used); Fits: 1500 Met Engines
QTY Required: 1
Oil pump assembly ; Fits: Chassis # E11001 –
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in black and white automotive vinyl), clips and screws required for one car. Click here for details and photos.Fits: 562 Hardtop with NO vent windows. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Drain tap; Fits: All Metropolitans
QTY Required: 1
Radio left inner knob; Fits: All Metropolitans
QTY Required: 1
Bumper bolt, to support bracket; Fits: All Metropolitans
QTY Required: 2
Glass, 3 pc left (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Reveal moulding, upper left (used)
QTY Required: 1
Spring, safety catch; Fits: All Metropolitans
QTY Required: 1
Bushing commutator end; Fits: All Metropolitans
QTY Required: 1
Oil seal, steering box outer column; Fits: All Metropolitans
QTY Required: 2
Gasket, lens seating (rubber); Fits: All Metropolitans
QTY Required: 2
Prop assembly, trunk lid; Fits: All Metropolitans
QTY Required: 1
Upholstery kit LATE MET – BLACK DIAMOND (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion and wheeLefthandouse covers.) Please order the 811 PAD kit for new padding. This kit is made-to-order, please allow 2 week production – material is in stock. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitans WITH vent windows.
QTY Required: 1
Wiper arm
QTY Required: 2
Arm, accelerator (used); sandblased and primed; Fits: Met Chassis # E33240 –
QTY Required: 1
Air baffle radiator, upper (used); Fits: All Metropolitans
QTY Required: 1
Bracket, air cleaner; Fits: 560 Metropolitans
QTY Required: 1