Conversion Gasket Set For Metropolitan Engines
Conversion set Includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # E11001 –
QTY Required: 1
40 ITEMS
Conversion set Includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # E11001 –
QTY Required: 1
Gasket, mounting plate to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Mounting plate (used), front; Fits: Chassis # E11001 –
QTY Required: 1
Mounting plate (used), front; Fits: Chassis # to E11000
QTY Required: 1
Drain tap, cylinder block; Fits: All Metropolitans
QTY Required: 1
Dowel, gearbox mounting plate; Fits: All Metropolitans
QTY Required: 2
Stud, fuel pump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 2
Stud, fuel pump to cylinder block; Fits: Chassis # to E11000
QTY Required: 2
Stud, oil pump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 2
Stud, oil pump to cylinder block; Fits: Chassis # to E11000
QTY Required: 3
Stud, short cylinder head; Fits: Chassis # E11001 –
QTY Required: 7
Stud, short cylinder head; Fits: Chassis # to E11000
QTY Required: 7
Stud, long cylinder head; Fits: Chassis # E11001 –
QTY Required: 4
Stud, long cylinder head; Fits: Chassis # to E11000
QTY Required: 4
Nut, stud main bearing cap; Fits: Chassis # E11001 –
QTY Required: 6
Nut, stud main bearing cap; Fits: Chassis # to E11000
QTY Required: 6
Stud, main bearing cap; Fits: Chassis # E11001 –
QTY Required: 6
Stud, main bearing cap; Fits: Chassis # to E11000
QTY Required: 6
Plug, oil hole oil filter boss; Fits: All Metropolitans
QTY Required: 1
Plug, oil relief valve vent hole; Fits: Chassis # E11001 –
QTY Required: 2
Plug, screw oil hole; Fits: 1H and A/C/FNH prefix engines
QTY Required: 1
Plug, taper oil hole; Fits: Chassis # E11001 –
QTY Required: 2
Plug, crankcase oil gallery; Fits: 1H and A/C/FNH prefix engines
QTY Required: 1
Plug, crankcase oil gallery; Fits: 1G and 2G prefix engines
QTY Required: 1
Welch or freeze plug, large; Fits: All Metropolitans
QTY Required: 4
Cylinder block (used) for Met engine with A/C/FNH prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Cylinder block (used) for Met engine with 1H prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Cylinder block (used) for Met engine with 2G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Cylinder block (used) for early Met engine with 1G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Conversion set includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # to E11000
QTY Required: 1
A/C/FNH Engine Assembly (X300) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending production backlog. Additional crate charge for shipping on pallet via motor freight, FOB Dallas, Tx.
QTY Required: 1
1H Prefix Engine Assembly (X300)
A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on condition of engine and production backlog. Extra crate charge for shipping on pallet via motor freight, FOB Dallas.
QTY Required: 1
2 G Prefix Engine Assembly (X300) – A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on block condition block and production backlog. There is an additional crate charge for motor freight shipment.
QTY Required: 1
1G Prefix Engine Assembly Rebuild (X600) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on the condition of the engine and the backlog. Additional crate charge for shipment and shipped via motor freight. Click here for details on our engine building process.
QTY Required: 1
Head gasket set Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: Chassis # E11001 –
QTY Required: 1
Head gasket set – Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: to Chassis # E11000
QTY Required: 1
Engine paint, Austin Green in aerosol can.
QTY Required: 1
Gasket, exhaust manifold; Fits: All Berkeleys
QTY Required: 2
Gasket, carburettor/manifold; Fits: All Berkeleys
QTY Required: 2
Gasket, inlet manifold; Fits: All Berkeleys
QTY Required: 2