Accelerator Pedal For Metropolitan
Accelerator pedal; Fits: Met Chassis to E10998
QTY Required: 1
929 ITEMS
Accelerator pedal; Fits: Met Chassis to E10998
QTY Required: 1
Air baffle radiator, center support (used); Fits: All Metropolitans
QTY Required: 1
Air cleaner oil bath assembly (used), limitied availability. Fits: 540 Metropolitans
Note: Use about 1 cup of 30 weight oil.
QTY Required: 1
Ashtray assembly with Airflyte lined lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front right (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back plate, rear right (used -limited supply) Fits: Chassis # E1001 – E29283
QTY Required: 1
Bearing, ball journal; Fits: to Chassis #E11000
QTY Required: 1
Hold down bracket for battery; Fits: All Metropolitans
QTY Required: 1
Parts catalog; Photocopy of original parts manual and spiral bound. Fits: All Berkeleys
QTY Required: 1
Hinge, bonnet, RH rear or LH front; Casted by Kip Motor craftsmen, hand sanded, triple chromed. Fits: All Berkeley
QTY Required: 1
Master cylinder – new; Fits: All Berkeleys
QTY Required: 1
Master brake cylinder, 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Cable, switch/starter
QTY Required: 1
Carburettor, Amal 376 ; Fits: All Berkeleys
QTY Required: 1
Carburettor, C-1386 (X 175) Rebuilt carburettor with new throttle shaft, bushings, jets and float. Ready-to-ship. Fits: 1G Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Rebuilt clutch cover assembly (X100).Price includes $100 core charge and will be refunded when KMC receives your rebuildable core. Fits: 1G prefix Met Engine
QTY Required: 1
Top frame assembly, fabricated by Kip Motor Co., made-to-order. May include an oversize shipping charge. Fits: to Chassis # E71275
QTY Required: 1
Convertible top, vinyl – track on windshield frame (Black on Black or Tan on Black Pinpoint Vinyl, is a two ply composite made of a PVC outer layer and a cotton lining fabric.) May incur an oversize shipping charge; Fits: All Berkeley’s
QTY Required: 1
Cowl vent assembly (used); Fits: All Metropolitans
QTY Required: 1
Front cover (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Cylinder head assembly (X650)
A rebuilt cylinder head assembly includes all components shown in photograph.
A core charge of $650 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on machining. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For 1 G prefix engines.
QTY Required: 1
Differential assembly, 8/37 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core. Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Dip switch; Fits: All Metropolitans
QTY Required: 1
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # to E11000
QTY Required: 1
1G Prefix Engine Assembly Rebuild (X600) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on the condition of the engine and the backlog. Additional crate charge for shipment and shipped via motor freight. Click here for details on our engine building process.
QTY Required: 1
Exhaust manifold (used); Fits: to Chassis # E11000
QTY Required: 1
Exhaust pipe; Fits: to Chassis # E11000
QTY Required: 1
Front bumper ,(X) Send in your front bumper so we can repair, strip and then re-chrome. Depending on condition, there maybe an additional surcharge for repairs. At times, we do have a cores. Please inquire; Fits: All Metropolitans
QTY Required: 1
Floor mat, front (rubber); Fits: All Metropolitans
QTY Required: 1
Fuel pump (X) ; Fits Chassis # to E11000. Please send in your fuel pump for rebuilding. Sorry no decent cores available. Please empty all fluids and wrap in plastic before packaging.
QTY Required: 1
Fuel tank – new production made to original specifications, please allow 4-6 weeks production; May incurr an oversize shipping charge. SE328/T60 Berkeley
QTY Required: 1
Fuel tank (X) Please send in your tank for refurbishing, sorry no cores are available. Tank is drained, cleaned and evaluated. Some tanks are rusting from the inside out so we cut them in half, scrap out the rust; treat and seal. Once dry, we make any repairs to exterior and plug up any pin holes. Weld two halves back together, sandblast exterior, prime and paint black. There may be additional charge depending on the condition of the tank. Refurbished tanks are far superior to any ‘conversion’ tank as those do not fit well and are not sealed on the inside.
QTY Required: 1
Gearbox (X295); Fits: to Chassis # E11000. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core.TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Shift lever (X) Please send in your shift lever to be rebuilt. Sorry, no cores available. Fits: All Metropolitans
QTY Required: 1
Generator – 22258 (X175) Price includes a $175 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge. Fits: 540/560 Metropoltans
QTY Required: 1
Grille, square mesh. Laser cut steel, then triple chromed. Made by KMC. Fits all Berkeleys.
QTY Required: 1
Handbrake lever assembly (X) Please send in your handbrake assembly to be refurbished. No cores available.
QTY Required: 1
Horn; Fits: All Berkeleys
QTY Required: 1
Horn low note windtone; Fits: All Metropolitans
QTY Required: 1
Jack NOS still wrapped in BMC branded wax paper. Handle sold separately. Fits: All Metropolitans
QTY Required: 1
Chassis serial # plate. Authentic reproduction. Please let us know your Chassis number (starts with an “E”) and we’ll stamp plate.
QTY Required: 1
Factory Parts catalog; photocopied and plastic comb bound with card stock cover. Features exploded views for Series I, II, III, and IV Metropolitan. US Version.
QTY Required: 1
Rear view mirror with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Oil filter element; Fits: All Metropolitans
QTY Required: 1
Oil pump (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core. ; Fits: to Chassis # E11000
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in beige automotive vinyl); clips and screws required for one car. Click here for details and photos. Fits: 541 Convertible. Custom kits available – please inquire. Made by Kip Motor Company. Oversize shipping surcharge.
QTY Required: 1
Piston set, standard; includes rings and pins. Fits: 1G engine prefix
QTY Required: 1
Radiator (X65) re-cored and painted. Price includes a $45 core charge that is refunded once we receive your rebuildable core. May incurr an oversize shipping fee. Fits: 540 Metropolitans
QTY Required: 1
RADIO (X) Please send in your radio for rebuilding to oringal AM specifications. Allow 3-4 weeks. Fits: All Metropolitans
QTY Required: 1
Rear bumper, re-chrome (X). Send in your bumper for repair and re-chroming. Depening on condition, there maybe an additional charge for repairs and stripping; Fits: All Metropolitans
QTY Required: 1
Glass, 3 pc center (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Starter (X) Please send in your core to be rebuilt, 1-2 week turnaround. ; Fits: All Metropolitans
QTY Required: 1
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Steering wheel (X) Please send in your wheel to be recast. Allow 6-8 weeks production time.; Fits: All Berkeleys
QTY Required: 1
Switch, ignition; Lucas replacement; Fits: All Berkeleys
QTY Required: 1
Upholstery kit EARLY MET – BEDFORD CORD STRIPE as original from the factory. (Kit contains front seat backs, front seat bottom, rear seat back, rear seat cushion and wheelhouse covers. Made-to-order, please allow 2 week production time. Custom kits available. Instructions are included. Pig rings are used to attach the upholstery to the seat frame and are installed using special ‘hog ring’ pliers. Please use new padding kit, 811 PAD, in conjunction with this kit. Click here for details. Fits: 540 Metropolitans; Oversize shipping surcharge.
QTY Required: 1
Upholstery kit, vinyl – seat frame type; Made-to-order. Please inquire about color options. Fits: All Berkeleys
QTY Required: 1
Water pump (X) Please send in your pump to be rebuilt. Sorry, no cores available. Fits: Chassis # to E10998
QTY Required: 1
Glass, windscreen (41 x 13 3/8″) *Crate surcharge of $85 is included in the price. Please see shipping note. Sorry, no longer available. Fits: All Berkeleys
QTY Required: 1
Glass, windshield *Crate surcharge of $85 is included in the price. Please see shipping note.
QTY Required: 1
Wiper motor (150X) Price includes a $150 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys
QTY Required: 1
Wiper motor (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Wiring harness; SE328 Berkeley
QTY Required: 1
Accelerator pedal; Fits: Met Chassis # E11001-
QTY Required: 1
Air baffle radiator, left (used); Fits: All Metropolitans
QTY Required: 1
Air cleaner oil bath assembly (used), limited availability. Fits: 560 Metropolitans
Note: Use about 1 cup of 30 weight oil.
QTY Required: 1
Ashtray assembly with Airflyte pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front right (used); sandblasted and primed. Fits: Chassis # E29284 –
QTY Required: 1
Back plate, rear right (used). Sorry, no longer available. Fits: Chassis # E29284 –
QTY Required: 1
Bearing, ball journal; Fits: Chassis #E11001 –
QTY Required: 1
Battery box; Fits: All Metropolitans
QTY Required: 1
Berkeley badge; Casted by Kip Motor craftsmen, hand sanded, triple chromed, then hand painted. Typically in stock. Fits: All Berkeleys
QTY Required: 1
Shop manual for Exelsior engine versions. A compliation of shop notes, articles and best practices.
QTY Required: 1
Hinge, bonnet, LH rear or RH front; Casted by Kip Motor craftsmen, hand sanded, triple chromed. Fits: All Berkeley
QTY Required: 1
Master brake cylinder, 5/8″; Fits: Chassis # E29284 –
QTY Required: 1
Repair kit, master cylinder; Fits: All Berkeleys
QTY Required: 1
Brake line, master cylinder to 5-way connector; Fits: All Berkeleys
QTY Required: 1
Cable, battery negative to starter switch with lug and eyelets
QTY Required: 1
Carburettor, C-1466 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: 2G Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Brake fluid CASTROL DOT 4, QT
NOTE: USE ONLY CASTROL DOT 4 BRAKE FLUID!
The seals & hoses in your brake system are made from natural rubber which is only compatible with vegetable based brake fluid. Castrol DOT 4 is the only vegetable based fluid generally available in the United States. Use of improper or mixing of fluids can lead to complete brake failure.; Fits: Most British Vehicles except Rolls Royce/Bentley
QTY Required: 1
Clip, retaining bonnet safety catch; Fits: All Metropolitans
QTY Required: 1
Rebuilt clutch cover assembly (X100).Price includes $100 core charge and will be refunded when KMC receives your rebuildable core. Fits: 2G prefix Met Engine
QTY Required: 1
Top frame assembly, fabricated by Kip Motor Co., made-to-order. May include an oversize shipping charge. Fits: Chassis # E71276 –
QTY Required: 1
Convertible top, canvas – track on windshield frame; May incurr an oversize shipping charge. Fits: All Berkeleys
QTY Required: 1
Screen for ventilator ; Fits: All Metropolitans
QTY Required: 1
Cylinder & key (for replacement ignition switch); Fits: All Berkeleys
QTY Required: 1
Front cover (used) sandblasted; Fits: Chassis # E11001 –
QTY Required: 1
Cylinder head assembly (X395)
A rebuilt cylinder head assembly that includes all components shown in photograph.
A core charge of $395 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on que. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For 2G prefix engines.
QTY Required: 1
Differential assembly, 9/41 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core.Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Gasket, dip switch; Fits: All Metropolitans
QTY Required: 1
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E11000 – E28705
QTY Required: 1
2 G Prefix Engine Assembly (X300) – A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on block condition block and production backlog. There is an additional crate charge for motor freight shipment.
QTY Required: 1
Engine mount, rear (X) (X) indicates rebuilt items sold exchange only. Your rebuildable part must be received in exchange before one is shipped.; Fits: All Berkeleys
QTY Required: 1
Exhaust manifold, sorry, no longer available.
QTY Required: 1
Exhaust pipe; Fits: Chassis # E11001 –
QTY Required: 1
Fuel pump (X); Fits: Chassis # E11001 -. Sorry, no decent cores available; please send in your pump for rebuilding. Please empty out all fluids, wap in plastic before packagin.
QTY Required: 1
Drain plug
QTY Required: 1
Fuel gauge, tank unit – replacement; Fits: All Berkeleys
QTY Required: 1
Gearbox (X295); Fits: Chassis # E11001 – E27904. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Pivot pin to operating shaft yoke; Fits: All Metropolitans
QTY Required: 1
Generator – 22700 (X175) Price includes a $175 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge. Fits: 560 Metropolitan
QTY Required: 1
Connector for handbrake; Fits: All Metropolitans
QTY Required: 1
Horn high note windtone; Fits: All Metropolitans
QTY Required: 1
Jack handle, metal made by KMC to fit the BMC jack. Fits: All Metropolitans
QTY Required: 1
Body # plate. Authentic reproduction. Please let us know your body number to stamp on plate in order comments.
QTY Required: 1
Technical Service Manual – features Early Met illustrations. Photocopied and plastic comb bound with card stock cover ideal for shop use. Fits: U.S. Version Early Metropolitan, Series I & II (540)
QTY Required: 1
Side mirror, door mounting with hardware; Fits: All Metropolitans
QTY Required: 1
Center bolt; Fits: 1500 Met Engines
QTY Required: 1
Driving gear, oil pump; Fits: Chassis # E11001 –
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in beige automotive vinyl), clips and screws required for one car. Click here for details and photos. Fits: 542 Hardtop. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston set, std. 0.01; Fits: 1G engine prefix
QTY Required: 1
Radiator (X65) re-cored and painted. Price includes a $45 core charge that is refunded once we receive your rebuildable core. May incurr an oversize shipping fee. Fits: 560 Metropolitan
QTY Required: 1
Radio antenna, Fits: All Metropolitans
QTY Required: 1
Bracket, right (used); Fits: All Metropolitans
QTY Required: 1
Floor mat, rear (rubber); Fits: All Metropolitans
QTY Required: 1
Bracket, rear overrider RH; Fits: All Berkeleys
QTY Required: 1
Repair kit, rear wheel cylinder – with alloy front cylinders ; Fits: All Berkeleys
QTY Required: 1
Glass, 3 pc center (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Speedometer, 0-90mph – “Smith’s” replacement; Fits: All Berkeleys
QTY Required: 1
Drive gear (pinion and sleeve); Fits: All Metropolitans
QTY Required: 1
Steering box assembly (X145) Price includes a $145 core charge that is refunded once we receive your rebuildable core. May incurr a heavy shipping surcharge.
QTY Required: 1
Hinge set chrome, left & right. Hand casted, sanded, then triple chromed. Made by KMC craftsmen. Fits: All Metropolitans
QTY Required: 1
Upholstery kit MID MET- BLACK & WHITE HOUNDSTOOTH (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion, wheelhouse covers, and button.) Made-to-order, please allow 2 week production. Please order the 811 PAD kit that contains all the padding for new upholstery set. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitans with NO Vent Windows.
QTY Required: 1
Upholstery kit, vinyl – no seat frame type; Made-to-order, Please inquire about vinyl color options. Fits: All Berkeleys
QTY Required: 1
Water pump with key hub (X) Please send in your pump to be rebuilt. Sorry, no cores available. Fits: Chassis # E11001-
QTY Required: 1
Bracket, windscreen support – Right Hand; Fits: All Berkeleys
QTY Required: 1
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the order.
QTY Required: 1
Wiper arm; Fits: All Berkeleys
QTY Required: 1
Wiper gearbox (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Wiring harness; SE492 Berkeley
QTY Required: 1
Arm, acclerator (used); sandblasted and primed; Fits: Met Chassis to E10998
QTY Required: 1
Air baffle radiator, lower. Sorry, no longer available; Fits: All Metropolitans
QTY Required: 1
Gasket, element sealing; Fits: 560 Metropolitans
QTY Required: 1
Ashtray assembly with Pebble lid, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Back plate, front left (used); sandblasted and primed. Fits: Chassis # E1001-E29283
QTY Required: 1
Back plate, rear left (used), sorry, no longer available. Fits: Chassis # E1001 – E29283
QTY Required: 1
Cover, battery box (used); Fits: All Metropolitans
QTY Required: 1
Repair kit for brake master cylinder 3/4″; Fits: Chassis # E0001 – E29283
QTY Required: 1
Brake line, 5-way connector to front Left Hand brake hose; Fits: All Berkeleys
QTY Required: 1
Grommet, cable through battery box
QTY Required: 1
Carburettor, C-1528 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: 1H Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Rebuilt clutch cover assembly (X85).Price includes $85 core charge and will be refunded when KMC receives your rebuildable core. Fits: 1500 Met Engine
QTY Required: 1
Bracket coil to generator; Fits: All Metropolitans
QTY Required: 1
Top seal, rubber; Fits: All 541/561 Convertible Metropolitans
QTY Required: 1
Convertible top, vinyl – snap on type Lift-A-Dots(Black on Black Pinpoint Vinyl, is a two ply composite made of a PVC outer layer and a cotton lining fabric.) ; Fits: All Berkeleys
QTY Required: 1
Ring, felt front cover; Fits: All Metropolitans
QTY Required: 1
Cylinder head assembly (X325).
A rebuilt cylinder head assembly that includes all components shown in photograph.
A core charge of $325 is included in the price and will be refunded upon receipt of your rebuildablecore. Assembled when ordered; production time 4-6 weeks depending on que. Click here for more information on our rebuild process. May incurr and oversize/heavy shipping charge. For “1500” engines.
QTY Required: 1
Differential assembly, 9/38 (X195) Price includes a $195 core charge that is refunded once we receive your rebuildable core. Production time is 1-2 weeks. May incurr a crate charge for shipping motor freight.
QTY Required: 1
Drive shaft assembly (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E28706-
QTY Required: 1
1H Prefix Engine Assembly (X300)
A complete rebuilit engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending on condition of engine and production backlog. Extra crate charge for shipping on pallet via motor freight, FOB Dallas.
QTY Required: 1
Manifold/pipe clamp assembly; Fits: Chassis # E11001 –
QTY Required: 1
Flasher lamp unit; Fits: All Metropolitans
QTY Required: 1
Overrider gasket set (rubber); Fits: All Metropolitans
QTY Required: 1
Repair kit, front wheel cylinder alloy type – Early Berkeley; Fits: All Berkeleys with alloy wheel cylinders.
QTY Required: 1
Fuel gauge, dash unit – Smith’s replacement; Fits: All Berkeleys
QTY Required: 1
Repair kit, for fuel pump. Save money and rebuild your own pump! Fits: All Metropolitans
QTY Required: 1
Washer, for drain plug
QTY Required: 1
Gearbox (X295); Fits: Chassis # E27905 – E28705. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight . Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Knob, gearshift – black; Fits: All Metropolitans
QTY Required: 1
Brush set, generator #22258
QTY Required: 1
Bracket to chassis, righthand (used); Fits: All Metropolitans
QTY Required: 1
Intake manifold (used); Fits: to Chassis # E11000
QTY Required: 1
Met 1500 Service Manual – features Late Met illustrations. Photocopied and plastic comb bound with cardstock cover. Ideal for shop use. UK Version, Series III & IV (560)
QTY Required: 1
Engine # plate. Authntic reproduction. Please let us know your engine # to stamp on plate.
QTY Required: 1
Side mirror, fender mounting – Left hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Seal washer; Fits: 1500 Met Engines
QTY Required: 1
Driven gear, oil pump; Fits: to Chassis # E11000
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in black/white automotive vinyl), clips & screws required for one car. Click here for details and photos. Fits: 561 Convertible with NO vent window. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston set, std. 0.02; Fits: 1G engine prefix
QTY Required: 1
Cap, radiator; Fits: All Metropolitans
QTY Required: 1
Radio knob set, includes left and right, inner & outer knobs, indicator and pointer. Made by Kip Motor Company. Fits: All Metropolitans
QTY Required: 1
Brake shoe set, rear – with alloy front wheel cylinders (X50) Price includes a $50 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys
QTY Required: 1
Bracket, left (used); Fits: All Metropolitans
QTY Required: 1
Bracket, rear overrider LH; Fits: All Berkeleys
QTY Required: 1
Glass, 3 pc left (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Floor mat, right side (rubber); Fits: All Metropolitans
QTY Required: 1
Safety catch; Fits: All Metropolitans
QTY Required: 1
Bushing drive end; Fits: All Metropolitans
QTY Required: 1
Tool bag, heavy duty black vinyl with snap; Fits: All Metropolitans
QTY Required: 1
Gasket set, trunk hinge; Fits: All Metropolitans
QTY Required: 1
Upholstery kit MID MET -AUTHENTIC WOVEN HOUNDS-TOOTH. Made of a higher quality nubby hounds-tooth that is equivalent to original fabric. (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion , wheel house covers and buttons). Please order the 811 PAD kit for new padding. Made-to-order, please allow 2 week production. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitan with NO vent windows.
QTY Required: 1
Water pump with press hub; Fits: Chassis # E11001 –
QTY Required: 1
Bracket, windscreen support – Left Hand; Fits: All Berkeleys
QTY Required: 1
Weatherstrip, windshield Typically, there is a wait for this item due to supplier output. Back-orders are filled based on order date. Please place your order; if you are lucky enough to find this part elsewhere, you may call or email and cancel the item.
QTY Required: 1
Wiper blade; Fits: All Berkeleys
QTY Required: 1
Wiper wheelbox/cable assembly (X25) Price includes a $25 core charge that is refunded once we receive your rebuildable core.
QTY Required: 1
Arm, accelerator (used); sandblased and primed; Fits: Met Chassis # E11001-E33239
QTY Required: 1
Air baffle radiator, right (used); Fits: All Metropolitans
QTY Required: 1
Insulator, rubber; Fits: 560 Metropolitans
QTY Required: 1
Ammeter – Smith’s replacement; Fits: All Berkeleys
QTY Required: 1
Lid only, ashtray Airflyte lined, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Axle case (used); Fits: to Chassis # E26992
QTY Required: 1
Back plate, front left (used); sandblasted and primed. Fits: Chassis # E29284 –
QTY Required: 1
Back plate, rear left (used), sorry, no longer available. Fits: Chassis # E29284 –
QTY Required: 1
Repair kit for brake master cylinder 5/8″; Fits: Chassis # E29284 –
QTY Required: 1
Brake line, 5-way connector to front Right Hand brake hose; Fits: All Berkeleys
QTY Required: 1
Brake line pipe, front RIGHT to 4-way connector; Fits: All Metropolitans
QTY Required: 1
Cable, battery positive to ground with lug and eyelets
QTY Required: 1
Carburettor, C-1630 (X 175) Rebuilt carburettor with new throttle shaft ready-to-ship; Fits: A/C/FNH Engine Prefix Metropolitans. Price includes $175 core charge and will be refunded when KMC receives your rebuildable core.
QTY Required: 1
Coil, ignition; Fits: All Metropolitans
QTY Required: 1
Convertible top, canvas – snap on type (Lift-a-dots); Fits: All Berkeleys
QTY Required: 1
Weatherstrip, cowl – rubber; Fits: All Metropolitans
QTY Required: 1
Gasket, front cover to cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Felt Liner, slide channel; Fits: All Metropolitans
QTY Required: 1
Drive shaft (used); Fits: Chassis # to E11000
QTY Required: 1
A/C/FNH Engine Assembly (X300) – A complete rebuilt engine assembly from valve covers to oil pan. Assembled when ordered; production time 8-10 weeks depending production backlog. Additional crate charge for shipping on pallet via motor freight, FOB Dallas, Tx.
QTY Required: 1
Gasket, exhaust manifold to exhaust pipe; Fits: to Chassis # E11000
QTY Required: 1
“Metropolitan” Fenderscript. Hand casted, sanded, then triple chromed by KMC craftsmen; Fits: All Metropolitans
QTY Required: 1
Brake shoe set, front for alloy type wheel cylinders – EARLY Berkeley (X75) Price includes a $75 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys with ALLOY front wheel cylinders.
QTY Required: 1
Bracket, front overrider; Fits: All Berkeleys
QTY Required: 1
Gasket, pump to block; Fits: Chassis # to E11000
QTY Required: 1
Pickup tube (X) Please send in your core to be refurbished.
QTY Required: 1
Gearbox (X295); Fits: Chassis # E28706-E59047. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight. Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Knob, gearshift – cream; Fits: All Metropolitans
QTY Required: 1
Brush set, generator #22700
QTY Required: 1
Cable for handbrake; Fits: All Metropolitans
QTY Required: 1
Bracket to chassis, lefthand (used); Fits: All Metropolitans
QTY Required: 1
Intake manifold (used); Fits: Chassis # E11001 –
QTY Required: 1
Layshaft; Fits: Chassis #E11001 –
QTY Required: 1
Floor mat, left side (rubber); Fits: All Metropolitans
QTY Required: 1
Owners Manual For Early Metropolitans, Series I & II. Color reprint of the original. For: 540 Metropolitans
QTY Required: 1
Patent plate, valve cover
QTY Required: 1
Side mirror, fender mounting – Right hand with mounting hardware; Fits: All Metropolitans
QTY Required: 1
Collar central bolt (used); Fits: 1500 Met Engines
QTY Required: 1
Oil pump assembly ; Fits: Chassis # E11001 –
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in black and white automotive vinyl), clips and screws required for one car. Click here for details and photos.Fits: 562 Hardtop with NO vent windows. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston set, std. 0.03; Fits: 1G engine prefix
QTY Required: 1
Drain tap; Fits: All Metropolitans
QTY Required: 1
Radio left inner knob; Fits: All Metropolitans
QTY Required: 1
Glass, 3 pc left (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Reveal moulding, upper left (used)
QTY Required: 1
Spring, safety catch; Fits: All Metropolitans
QTY Required: 1
Bushing commutator end; Fits: All Metropolitans
QTY Required: 1
Prop assembly, trunk lid; Fits: All Metropolitans
QTY Required: 1
Upholstery kit LATE MET – BLACK DIAMOND (Contains front seat backs, front seat bottom, rear seat back, rear seat cushion and wheeLefthandouse covers.) Please order the 811 PAD kit for new padding. This kit is made-to-order, please allow 2 week production – material is in stock. Custom kits available; please inquire. Click here for more details. Fits: 560 Metropolitans WITH vent windows.
QTY Required: 1
Pulley for water pump and fan; Fits: 1G prefix Met engine
QTY Required: 1
Mirror, windscreen – replacement; Fits: All Berkeleys
QTY Required: 1
Arm, accelerator (used); sandblased and primed; Fits: Met Chassis # E33240 –
QTY Required: 1
Air baffle radiator, upper (used); Fits: All Metropolitans
QTY Required: 1
Bracket, air cleaner; Fits: 560 Metropolitans
QTY Required: 1
Lid only , ashtray Airflyte pebble, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Axle case (used); Fits: Chassis # E26993 –
QTY Required: 1
Brake line, 5-way connector to rear 3-way connector; Fits: All Berkeleys
QTY Required: 1
Brake line pipe, front LEFT to 4-way connector; Fits: All Metropolitans
QTY Required: 1
Cable, engine to ground with eyelets
QTY Required: 1
Carburettor Repair kit- contains all rubber parts for rebuild; Fits: All Metropolitans
QTY Required: 1
Release plate. Sorry, not currently available. Fits: Metopolitan Chassis # E11001-
QTY Required: 1
Condensor; Fits: All Metropolitans
QTY Required: 1
Gasket, front cover to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Drive shaft (used); Fits: Chassis # E11000 – E28705
QTY Required: 1
Bracket, right (used); Fits: All Metropolitans
QTY Required: 1
Gasket, pickup tube
QTY Required: 1
Gasket, pump to block; Fits: Chassis # E11001 –
QTY Required: 1
Gearbox (X295); Fits: Chassis #E59048-. Assembled upon order. Please allow 2-4 weeks for production depending on backlog. Additional crate charge for shipping motor freight. Price includes a $295 core charge that is refunded once we receive your rebuildable core. TECH NOTE: Grinding of gears or hard shifting are frequently caused by the use of improper gearbox lubricant. See your owners handbook for lubrication specifications.
(used) indicates used parts.
QTY Required: 1
Operating shaft (used), sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Bushing, generator; Fits: All Metropolitans
QTY Required: 1
Head gasket set – Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: to Chassis # E11000
QTY Required: 1
Horn/signal assembly (X) Must send your unit to be rebuilt. No cores are available. . Does NOT include new horn retaining ring , plate or horn push button.
QTY Required: 1
Plug, vacuum connection (used)
QTY Required: 1
Thrust washer for laygear front; Fits: Chassis #E11001 –
QTY Required: 1
Plate assembly, upper bonnet lock (used); Fits: All Metropolitans
QTY Required: 1
Owners Manual For Mid Metropolitans , Series III, without Vent Windows. Color reprint of the original. For: 560 Metropolitans no vent window
QTY Required: 1
Body (used); Fits: 1500 Met Engines
QTY Required: 1
Drive spindle (used); Fits: to Chassis # E11000
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in black/white automotive vinyl), clips and screws required for one car. Click here for details and photos.Fits: 561 Convertible WITH vent windows. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston set, std. 0.04; Fits: 1G engine prefix
QTY Required: 1
Top hose, radiator outlet, rubber.; Fits: All Metropolitans
QTY Required: 1
Radio left outer knob; Fits: All Metropolitans
QTY Required: 1
Shoe set, rear (shoes for both rear wheels); Fits: All Metropolitans
QTY Required: 1
Repair kit, rear wheel cylinder – with cast iron front cylinders; Fits: All Berkeleys
QTY Required: 1
Glass, 3 pc right (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: to Chassis # E13619
QTY Required: 1
Warning light, red – Lucas replacement; Fits: All Berkeleys
QTY Required: 1
Reveal moudling, upper right (used)
QTY Required: 1
Shoe set, front (X) Please send in your brake shoes to be refurbished. Sorry, no cores available.
QTY Required: 1
Brush set; Fits: All Metropolitans
QTY Required: 1
Switch, head & sidelamps – Lucas replacement; Fits: All Berkeleys
QTY Required: 1
Tonneau, vinyl – Black. Shipped with Lift-a-Dot snaps to be installed to match the pattern on your vehicle.; Fits: All Berkeleys
QTY Required: 1
Weatherstrip trunk lid, rubber; Fits: All Metropolitans
QTY Required: 1
Floor mat, trunk (rubber); Fits: All Metropolitans
QTY Required: 1
Pulley for water pump and fan (used); Fits: 2G to 2G19182 Met engine
QTY Required: 1
&lsguo;LUCAS Coil’ decal
QTY Required: 1
Boot seal for arm, rubber. Fits: Met Chassis # E11001-
QTY Required: 1
Lid only, ashtray Pebble, chrome. Authentic reproduction by Kip Motor Co.
QTY Required: 1
Brake Connector, 4-way on wheel house; Fits: All Metropolitans
QTY Required: 1
Brake line, 3-way connector to rear Left Hand brake hose; Fits: All Berkeleys
QTY Required: 1
Zenith Float, reproduction made of copper by Kip Motor Co. You can know replace the float and keep your OEM carburettor. Original carburettors are far superior! Fits: All Metropolitans
QTY Required: 1
Release bearing; Fits: All Metropolitans
QTY Required: 1
Contact set; Fits: 540 Metropolitans
QTY Required: 1
Side cover, front (used); Fits: All Metropolitans
QTY Required: 1
Door, left (used); Fits: to Chassis # E48847
QTY Required: 1
Drive shaft (used); Fits: Chassis # E28706-
QTY Required: 1
Silencer – Muffler, new production mufflers made to original specifications. Please allow 1 week production. Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Front cover (used), fan housing ; Fits: All Metropolitans
QTY Required: 1
Bracket, left (used); Fits: All Metropolitans
QTY Required: 1
Bottom frame (used) 1 3/8″ rise
QTY Required: 1
Pipe, pump/carburettor (X); Fits: All Metropolitans. Please send in your pipe for refurbishing. Sorry, no cores available.
QTY Required: 1
Fuel gauge, tank unit
QTY Required: 1
Fusebox; Fits: All Metropolitans
QTY Required: 1
Gasket set, includes all gaskets for gearbox rebuild. Does not include oil seals. Fits: Chassis to #E11000
QTY Required: 1
Key; Fits: All Metropolitans
QTY Required: 1
Warning light, green – Lucas replacement; Fits: All Berkeleys
QTY Required: 1
Link, brake balance lever (used); Fits: All Metropolitans
QTY Required: 1
Head gasket set Includes all gaskets required when removing the cylinder head and then replacing the cylinder head. Fits: Chassis # E11001 –
QTY Required: 1
Horn/signal assembly (X) Must send your unit to be rebuilt. No cores are available. Assembly does not include new retaining ring, plate or horn push button.
QTY Required: 1
Nut, Righthand Thread; Fits: All Metropolitans
QTY Required: 1
Plug, vacuum connection (used)
QTY Required: 1
Plate assembly, lower bonnet lock (used); Fits: 540 Metropolitans
QTY Required: 1
Owners Manual For Late Metropolitans, Series IV, with Vent Windows. Color reprint of the original. For: 560 Metropolitans with vent window
QTY Required: 1
Spring; Fits: 1500 Met Engines
QTY Required: 1
Drive spindle; Fits: Chassis # E11001 –
QTY Required: 1
Bracket for operating shaft lower bearing (used), sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Panel kit – Includes all interior panels (right and left door panels, quarter panel, belt rail trim, pillar trim, heelboard trim, and cowl trim in beige automotive vinyl), clips and screws required for one car. Click here for details and photos. Fits: 562 Hardtop WITH vent windows. Custom kits available, please inquire. Oversize shipping surcharge.
QTY Required: 1
Piston set, standard; includes rings and pins. Fits: 2G engine prefix.
QTY Required: 1
“T” hose to water pump with outlet to heater, rubber. ; Fits: All Metropolitans
QTY Required: 1
Radio right inner knob; Fits: All Metropolitans
QTY Required: 1
Brake shoe set, rear – with cast iorn front wheel cylinders (X20) Price includes a $20 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys
QTY Required: 1
Glass, 3 pc right (used) for rear backlight. *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note. Fits: Chassis # E13620-
QTY Required: 1
Reveal moulding, lower (used)
QTY Required: 1
Shoe set, front (X) Please send in your brake shoes to be refurbished. Sorry, no cores available.
QTY Required: 1
Spring ring for bearing; Fits: Chassis #E11001 –
QTY Required: 1
Tonneau, canvas – Tan. Shipped with Lift a Dots to fit the pattern on your vehicle. Snaps are not installed.; Fits: All Berkeleys
QTY Required: 1
Weatherstrip, window vent (pair); Fits: All Metropolitans with vent windows
QTY Required: 1
Pulley for water pump and fan (used); Fits: from 2G19183 Met engine +
QTY Required: 1
Main harness, engine to dash, tape wrapped like the original made by KMC
QTY Required: 1
Brace, air cleaner; Fits: 540 Metropolitans
QTY Required: 1
Bellcrank lever (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Brake line pipe, from 3-way to 4-way connector on chassis; Fits: All Metropolitans
QTY Required: 1
Brake line, 3-way connector to rear Rright Hand hose; Fits: All Berkeleys
QTY Required: 1
Throttle shaft, carburettor; Fits: All Metropolitans
QTY Required: 1
Carpet set, front and back with rubber heel pad. Made of black automotive carpet; 100% nylon pile. Felt pad included. Click here for details. Custom carpet available, please inquire. Made by Kip Motor Company. Fits: All Metropolitans
QTY Required: 1
Cigar lighter assembly; Fits: to Chassis # E34076
QTY Required: 1
Contact set; Fits: 560 Metropolitans
QTY Required: 1
Conversion set includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # to E11000
QTY Required: 1
Convertible top, black pin point vinyl with single window. Shipped with snaps for local installation to ensure perfect alignment to your snap studs on vehicle. Fits: 541 Metropolitans
QTY Required: 1
Side cover, rear (used) sandblasted
QTY Required: 1
Door, left (used); Fits: Chassis # E48847 – no vent window
QTY Required: 1
Sleeve yoke (used); Fits: Chassis # to E11000
QTY Required: 1
Gasket, manifold to cylinder head; Fits: to Chassis # E11000
QTY Required: 1
Tail pipe; Fits: All Metropolitans
QTY Required: 1
Shroud, rubber to fan housing cover; Fits: All Metropolitans
QTY Required: 1
Bottom frame (used) 1 7/8″ rise (limited stock). Or send in your frames for refurbishment.
QTY Required: 1
Repair kit, front wheel cylinder cast iron type (Late Berkeley); Fits: All Berkeleys with cast iron wheel cylinders.
QTY Required: 1
Gasket for fuel gauge tank unit
QTY Required: 1
Screw, banjo; Fits: All Metropolitans
QTY Required: 1
Gasket set, includes all gaskets for gearbox rebuild. Does not include oil seals. Fits: Chassis # E11001 –
QTY Required: 1
Bearing, generator; Fits: All Metroplitans
QTY Required: 1
Retaining ring, made by KMC artisans. Fits: All Metropolitans
QTY Required: 1
Nut, Lefthand Thread; Fits: All Metropolitans
QTY Required: 1
Knob, wiper/panel/headlamp; Fits: All Berkeleys
QTY Required: 1
Plate assembly, lower bonnet lock (used); Fits: 560 Metropolitans
QTY Required: 1
Owners Manual For UK Metropolitan Series IV. Color reprint of the original. For: 560 Metropolitans with vent windows
QTY Required: 1
Washer, steel; Fits: 1500 Met Engines
QTY Required: 1
Strainer (used); Fits: 1G engine prefix
QTY Required: 1
Lever, 2nd & 3rd gear (used) operating shaft, sandblasted and primed; Fits: All Metropolitans
QTY Required: 1
Piston set, std. 0.01; Fits: 2G engine prefix
QTY Required: 1
Radio right outer knob; Fits: All Metropolitans
QTY Required: 1
Brake shoe set, rear – T60 Berkeley only (X10) Price includes a $10 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys
QTY Required: 1
Glass, 1 pc (used) for rear backlight. Fits: Chassis # E46164 – *Fragile surcharge of $85 will be added to the shipping fee. Please see shipping note.
QTY Required: 1
Reveal moulding, right (used)
QTY Required: 1
Gasket, for side cover steering box; Fits: All Metropolitans
QTY Required: 1
Gasket for water pump to cylinder block; Fits: to Chassis # E10998
QTY Required: 1
Horn harness, horn to horn, tape wrapped like the original made by KMC
QTY Required: 1
Brace, air cleaner; Fits: 560 Metropolitans
QTY Required: 1
Bracket for bellcrank (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Lever, brake pedal (used); Fits: Chassis # E1001 – E11000
QTY Required: 1
Brake line, 3-way connector; Fits: All Berkeleys
QTY Required: 1
Insulator for carburettor body; Fits: All Metropolitans
QTY Required: 1
Cigar lighter assembly; Fits: Chassis # E34077 –
QTY Required: 1
Clutch plate (X75). Price includes $75 core charge .
QTY Required: 1
Conversion set Includes all gaskets required to rebuild the engine block that are not included in the Head Gasket Set. Fits: Chassis # E11001 –
QTY Required: 1
Convertible top, tan pin point vinyl with single window. Window is STITCHED in, not heat sealed. Shipped with snaps for local installation to ensure perfect alignment to your snap studs on vehicle. Three year warranty. Made-on-Demand; please allow 2 weeks for production. Fits: 541 Metropolitans
QTY Required: 1
Frame, convertible top; will incurr an oversize shipping charge. Fits: SE328/SE492 Early Berkeley;
QTY Required: 1
Distributor 40284 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. ; Fits: 1G Met engine prefix
QTY Required: 1
Door, left (used); Fits: 560 Metropolitan with vent windows
QTY Required: 1
Moulding, right (used). Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Sleeve yoke (used); Fits: Chassis # E11000 – E28705
QTY Required: 1
Gasket, manifold to cylinder head; Fits: Chassis # E11001 –
QTY Required: 1
Door assembly (used); Fits: All Metropolitans
QTY Required: 1
Brake shoe set, front cast Iron type cylinders (X95) Price includes a $95 core charge that is refunded once we receive your rebuildable core.; Fits: All Berkeleys with cast iron wheel cylinders.
QTY Required: 1
Right frame (used) Not Currently Available
QTY Required: 1
Insulator, tank to body
QTY Required: 1
Lever, brake balance support assembly (used); Fits: All Metropolitans
QTY Required: 1
Horn button “Nash”, made by KMC artisans.
QTY Required: 1
Key, code cut FP (please tell us your key code in order comments). Fits: All Metropolitans
QTY Required: 1
Lock ring, 2nd gear; Fits: Chassis #E11001 –
QTY Required: 1
Felt washer; Fits: 1500 Met Engines
QTY Required: 1
Plug, oil hole; Fits: Chassis # E11001 –
QTY Required: 1
Strainer (used); Fits: 2G-GNH149802 engine numbers
QTY Required: 1
Piston set, std. 0.02; Fits: 2G engine prefix
QTY Required: 1
Lower hose, radiator inlet, rubber; Fits: All Metropolitans
QTY Required: 1
Radio dial indicator; Fits: All Metropolitans
QTY Required: 1
Reveal moulding, left (used)
QTY Required: 1
Plug, rubber, oil filler; Fits: All Metropolitans
QTY Required: 1
Switch, headlamp dip – replacement; Fits: All Berkeleys
QTY Required: 1
Lock assembly inside trunk lid; Fits: All Metropolitans
QTY Required: 1
Gasket for water pump to cylinder block; Fits: Chassis # E11001+
QTY Required: 1
Weatherstrip, rear window glass 3 pc; Fits: to Chassis # E13619
QTY Required: 1
Body harness, main to tail, tape wrapped like the original made by KMC
QTY Required: 1
Hose, air cleaner to valve rocker cover; Fits: 560 Metropolitans
QTY Required: 1
Spring clip for bellcrank, anti rattle (used); sandblasted and primed.Fits: Met Chassis # E11001-
QTY Required: 1
Lever, brake pedal (used); Fits: Chassis # E11001 – E29283
QTY Required: 1
Brake line pipe, master cylinder to 3-way connector; Fits: All Metropolitans
QTY Required: 1
Clutch plate (X50). Price includes $50 core charge
QTY Required: 1
Convertible top, black pin point vinyl with three windows. Windows are SEWN IN, not heat sealed. Made-on-demand, please allow 2-3 weeks for production. Comes with three year warranty – best in the industry. Shipped with snaps for local installation to ensure perfect alignment to your snap studs on vehicle. Fits: 561 Metropolitans
QTY Required: 1
Courtesy light assembly (fits under dash); Fits: All Metropolitans
QTY Required: 1
Vent tube (used), cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Distributor 40438 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. Fits: 2G Prefix Met Engine
QTY Required: 1
Door, right (used) sorry, no longer available; Fits: to Chassis # E48847
QTY Required: 1
Moulding, left (used). Sorry, no longer available. Fits: All Metropolitans
QTY Required: 1
Sleeve yoke (used); Fits: Chassis # E28706-
QTY Required: 1
Engine paint, Austin Green in aerosol can.
QTY Required: 1
Hot spot (used); Fits: All Metropolitans
QTY Required: 1
Gasket, fan housing ; Fits: All Metropolitans
QTY Required: 1
Mat, PAIR Rubber with “M” embossed; 11″ x 17″. Sorry, SOLD OUT.
QTY Required: 1
Front License plate holder; Fits: All Metropolitans
QTY Required: 1
Right frame (used) 1 7/8″ rise
QTY Required: 1
Oil seal front cover; Fits: Chassis # E59048 –
QTY Required: 1
Lever, brake balance (used); Fits: All Metropolitans
QTY Required: 1
Horn button bulls-eye, made by KMC artisans.
QTY Required: 1
Key, code cut FA (please tell us your key code in order comments). Fits: All Metropolitans
QTY Required: 1
Pressure plate; Fits: 1500 Met Engines
QTY Required: 1
Strainer; Fits: Engine # CNH149803 –
QTY Required: 1
Lever, 1st & Reverse operating shaft lower (used); Fits: All Metropolitans
QTY Required: 1
Piston set, std. 0.03; Fits: 2G engine prefix
QTY Required: 1
Radio dial pointer; Fits: All Metropolitans
QTY Required: 1
Clip, upper center; For: 3 piece trim
QTY Required: 1
Gasket, end cover steering box; Fits: All Metropolitans
QTY Required: 1
Switch, turn signal – replacement; Fits: All Berkeleys
QTY Required: 1
The Metropolitan Book Mk VIII. Kip Motor’s parts catalog with exploded views and pricing. Comes with your first purchase!
QTY Required: 1
Thrust washer, .1565-75″; Fits: Chassis #E11001 –
QTY Required: 1
Trunk handle chrome with locking key; Fits: All Metropolitans
QTY Required: 1
Weatherstrip, rear window glass, 3 pc; Fits: Chassis # E13620 –
QTY Required: 1
Regulator, left (X) Must send in your unit to be rebuilt; no cores available. ; Fits: All Metropolitans with NO vent windows
QTY Required: 1
Panel light harness, tape wrapped like the original made by KMC
QTY Required: 1
Link from bellcrank to accelerator shaft (used); sandblasted and primed. Fits: All Metropolitans
QTY Required: 1
Stop, hood prop; Fits: All Metropolitans
QTY Required: 1
Lever, brake pedal (used); Fits: Chassis # E29284 –
QTY Required: 1
Brake line pipe, 3-way connector to rear brake hose; Fits: All Metropolitans
QTY Required: 1
Master cylinder 5/8″ for clutch system. Only use CASTROL Brake/Clutch DOT 4 fluid. Fits: Chassis # E11001 –
QTY Required: 1
Convertible top, WHITE. Top is made of durable WHITE pinpoint vinyl, a two ply vinyl composite material with pinpoint outer and black cotton inner side. This high quality top has double stitched SEWN-IN windows – not heat sealed – that last longer. Top comes with a *8* year manufacture warranty and is made in the USA by a family business since 1964. This is by far a superior top to other, cheaper, heat sealed tops. Shipped with two straps and snaps. Should be professionally installed. Fits: 561 Metropolitans
QTY Required: 1
Cylinder block (used) for early Met engine with 1G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Vent tube (used), cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Gasket, differential to axle case; Fits: All Metropolitans
QTY Required: 1
Distributor 40499 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. Fits: 1H Prefix Met Engine
QTY Required: 1
Door, right (used); Fits: Chassis #E48848 – no vent window
QTY Required: 1
Flange yoke (used); Fits: All Metropolitans
QTY Required: 1
Gasket, hot spot; Fits: All Metropolitans
QTY Required: 1
Left frame (used) Not Currently Available 1 3/8″ rise
QTY Required: 1
Grommet, filler tube (rubber)
QTY Required: 1
Seal, rear extension; Fits: Chassis # E11000 – E28705
QTY Required: 1
License lamp assembly includes the stainless steel cover, clear lens, rubber body gasket, bulb, and base. Fits: All Metropolitans
QTY Required: 1
Cylinder lock with new key; Fits: All Metropolitans
QTY Required: 1
Circlip; Fits: 1500 Met Engines
QTY Required: 1
Release valve; Fits: Chassis # E11001 –
QTY Required: 1
Piston set, std. 0.04; Fits: 2G engine prefix
QTY Required: 1
Plate, moulding cover support; Fits: All Metropolitans
QTY Required: 1
Radio Service manual, photocopy and ibco bound; Fits: All Metropolitans
QTY Required: 1
Shift rod, 1st & Reverse (used); Fits: All Metropolitans
QTY Required: 1
Side curtain set (X) (X) indicates rebuilt items sold exchange only. Send us your rebuildable curtain frames.; Fits: All Berkeleys
QTY Required: 1
Bracket (used), spare wheel mounting – sandblasted; Fits: All Metropolitans
QTY Required: 1
Nut for olive, end cover; Fits: All Metropolitans
QTY Required: 1
Switch, stop lamp – replacement; Fits: All Berkeleys
QTY Required: 1
Gasket, trunk handle; Fits: ALL Metropolitans
QTY Required: 1
Weatherstrip, rear window glass, 1 pc; Fits: Chassis # E46164 –
QTY Required: 1
Regulator, right (X) Must send in your unit to be rebuilt. No cores available. ; Fits: All Metropolitans with NO vent windows.
QTY Required: 1
Shaft, accelerator (used); sandblasted and primed. Fits: Met Chassis to E10998
QTY Required: 1
Air cleaner replacement assembly with dry filter. Made by Kip Motor Company; Fits: All Metropolitans
Note: If you are tired of the messy oil bath air cleaner, try our custom made replacement with replaceable dry filter elements.
QTY Required: 1
Hose, rear flexible; Fits: All Metropolitans
QTY Required: 1
Bracket for brake and clutch return springs (used); Fits: All Metropolitans
QTY Required: 1
Repair kit, 5/8″. Includes all necessary components to repair/rebuild clutch master cylinder. Fits: Chassis # E11001 –
QTY Required: 1
Cylinder block (used) for Met engine with 2G prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Distributor 40600 (X) Please send in your core to be rebuilt. If a vacuum unit is required, there will be an additional part charge. Fits: A/C/FNH Prefix Met Engine
QTY Required: 1
Door, right (used); Fits: 560 Metropolitan with vent windows
QTY Required: 1
Dust cover (used); Fits: Chassis # to E11000
QTY Required: 1
Left frame (used) 1 7/8″ rise
QTY Required: 1
Fuel gauge instrument; Fits: All Metropolitans
QTY Required: 1
Collar, filler tube
QTY Required: 1
Mounting plate, gearbox (used) sandblasted
QTY Required: 1
Seal, rear extension; Fits: Chassis # E28706 –
QTY Required: 1
Crossrod, long rear brake (used); Fits: All Metropolitans
QTY Required: 1
Control heater valve (X) Please send in your unit to rebuild, no cores are available. Fits: All Metropolitans
QTY Required: 1
Wiring harness for horn ; Fits: All Metropolitans
QTY Required: 1
Cover; Fits: All Metropolitans
QTY Required: 1
Knob black; Fits: All Metropolitans
QTY Required: 1
Spring, oil release valve; Fits: Chassis # E11001 –
QTY Required: 1
Reveal moulding, rear left (used); Fits: to Chassis # E11000
QTY Required: 1
Shift rod, 2nd & 3rd (used); Fits: All Metropolitans
QTY Required: 1
Gasket, for spare tire bracket; Fits: All Metropolitans
QTY Required: 1
Olive, stator tube; Fits: All Metropolitans
QTY Required: 1
Striker plate for trunk handle; Fits All Metropolitans
QTY Required: 1
Regulator, left (X) Must send in your unit to be rebuilt; no cores available.
QTY Required: 1
Dip switch harness, tape wrapped like the original made by KMC
QTY Required: 1
Shaft, accelerator (used); sandblasted and primed. Fits: Met Chassis # E11001-
QTY Required: 1
Replacement filter for air cleaner; Fits: All Metropolitans
QTY Required: 1
Screw, bracket to body; Fits: Chassis # E11001 –
QTY Required: 1
Clutch pedal (used), sandblasted and primed. Fits: All Metropolitan
QTY Required: 1
Cylinder block (used) for Met engine with 1H prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Washer, .004″, differential packing bearing; Fits: All Metropolitans
QTY Required: 1
Bush & lead; Fits: All Metropolitans
QTY Required: 1
Dust cover (used); Fits: Chassis # E11000 – E28705
QTY Required: 1
Finish moulding, lower right (used)
QTY Required: 1
Seat spring, bottom (used) 1 3/8″ rise (limited stock). Or send in your frame and springs for refurbishment.
QTY Required: 1
Gas filler cap, gas tank
QTY Required: 1
Gas drain tube with screw; Fits: All Metropolitans
QTY Required: 1
Mounting plate, gearbox (used) sandblasted
QTY Required: 1
Grille bar for Hudson and Nash Metropolitans, Hand casted, sanded then triple chromed. Fits: 540 Metropolitans
QTY Required: 1
Seal, valve to body; Fits: All Metropolitans
QTY Required: 1
Lens clear; Fits: All Metropolitans
QTY Required: 1
Knob cream; Fits: All Metropolitans
QTY Required: 1
Head (used); Fits: 1500 Met Engines
QTY Required: 1
Piston set, std. 0.01; Fits: 1H Engine Prefix
QTY Required: 1
Piston set, std. 0.01; Fits: 1H Engine Prefix
QTY Required: 1
Reveal moulding, rear right (used); Fits: to Chassis # E11000
QTY Required: 1
Nut, grooved for spare wheel mounting; Fits: All Metropolitans
QTY Required: 1
Key, speedometer gear; Fits: Chassis #E11001 –
QTY Required: 1
Stator tube (used); Fits: All Metropolitans
QTY Required: 1
Bracket (used), steering support; Fits: All Metropolitans
QTY Required: 1
Thermostat, 180 degrees; Fits: All Metropolitans
QTY Required: 1
Repair kit for all front wheel cylinders; parts for one axle. Fits: Chassis # E1001 – E29283
QTY Required: 1
Regulator, right (X) Must send in your unit to be rebuilt. Sorry, no cores available.
QTY Required: 1
License lamp harness, tape wrapped like the original made by KMC. Sorry, no longer available
QTY Required: 1
Bearing for accelerator shaft, brass & rubber; Fits: All Metropolitans
QTY Required: 1
Spacer, between screw and bracket; Fits: Chassis # E 11001 –
QTY Required: 1
Brake line pipe, 3-way connector to right wheel cylinder. Fits: Chassis # E1001-E29283
QTY Required: 1
Pedal cover, rubber; Fits: All Metropolitans
QTY Required: 1
Header seal buffer on windshield frame
QTY Required: 1
Cylinder block (used) for Met engine with A/C/FNH prefix. Crate charge for shipping on pallet motor freight.
QTY Required: 1
Washer, .010″, differential packing bearing; Fits: All Metropolitans
QTY Required: 1
Distributor cap; Fits: 540 Metropolitans
QTY Required: 1
Dust cover (used); Fits: Chassis # E28706-
QTY Required: 1
Fender, front left (used); Fits: All Metropolitans
QTY Required: 1
Finish moulding, lower left (used)
QTY Required: 1
Seat spring, bottom (used) 1 7/8″ rise
QTY Required: 1
Pipe, tank end to pump (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Level indicator; Fits: Chassis #E11001 –
QTY Required: 1
Mounting plate, gearbox (used) sandblasted
QTY Required: 1
Rear Bracket, generator (used); Fits: All Metropolitans
QTY Required: 1
Glovebox cubby made from heavy duty black cardboard; Fits: All Metropolitans
QTY Required: 1
Grille mesh- NEW authentic reproduction made to orignal specificiatons. Laser cut steel, triple chromed. Fits: 560 Metropolitan
QTY Required: 1
Gasket, rubber; Fits: All Metropolitans
QTY Required: 1
Lighting/ignition switch, 4 prong. Sorry, 6 prong switches not available. Replacement comes with wiring instructions. Fits: All Metropolitans
QTY Required: 1
Pipe, oil filter to cylinder block ; Fits: 1500 Met Engines
QTY Required: 1
Nut, for oil release valve; Fits: All Metropolitans
QTY Required: 1
Piston set, std. 0.02; Fits: 1H Engine Prefix
QTY Required: 1
Bearing rear, 3rd motion shaft; Fits: All Metropolitans
QTY Required: 1
Reveal moulding (used); Fits: Chassis # E11001 –
QTY Required: 1
Steering arm (used); Fits: to Chassis # E26872
QTY Required: 1
Repair kit for all front wheel cylinders; parts for one axle. Fits: Chassis # E29284 –
QTY Required: 1
Bracket for bearing (used); sandblasted and primed. Fits: All Metropolitans
QTY Required: 1
Bracket, support master cylinder (used); Fits: Chassis # E1001 – E11000
QTY Required: 1
Brake line pipe, 3-way connector to right wheel cylinder. Fits: Chassis # E29284 –
QTY Required: 1
Sealing rubber cushion for clutch pedal lever; Fits: All Metropolitans
QTY Required: 1
Distributor cap; Fits: 560 Metropolitans
QTY Required: 1
Finish plate, front right hand; Fits: All Metropolitans
QTY Required: 1
Fender, front right (used); Fits: All Metropolitans
QTY Required: 1
Clip, finish moulding – new
QTY Required: 1
Padding, front seat bottom; Fits: All Metropolitans
QTY Required: 1
Pipe, tank to pump intermediate (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Gasket, mounting plate to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Pillar, generator mounting (used);Fits: Chassis # to E10998
QTY Required: 1
Grille surround, top – stamped steel, triple chrome plated. Better than the original. Made by KMC artisans. Fits: 560 Metropolitan
QTY Required: 1
Crossrod, short rear brake (used); Fits: All Metropolitans
QTY Required: 1
Instrument panel (used), sandblasted; Fits: All Metropolitans
QTY Required: 1
Bulb; Fits: All Metropolitans
QTY Required: 1
Adaptor, full flow filter to connection; Fits: 1500 Met Engines
QTY Required: 1
Adaptor, for oil pressure switch (used); Fits: Chassis # E11001 –
QTY Required: 1
Piston set, std. 0.03; Fits: 1H Engine Prefix
QTY Required: 1
Wheel cap, plain (used); Fits: All Metropolitans
QTY Required: 1
Oil seal speedometer gear; Fits: 540 8-37 axle
QTY Required: 1
Cable assembly, starter; Fits: All Metropolitans
QTY Required: 1
Steering arm (used); Fits: Chassis # E26873 – E57459
QTY Required: 1
Plug, filler hole; Fits: All Metropolitans
QTY Required: 1
Repair kit rear wheel cylinders; parts for one axle Fits: Chassis # E1001 – E29283
QTY Required: 1
Spring for shaft, anti rattle; Fits: All Metropolitans
QTY Required: 1
Bracket, support master cylinder (used); Fits: Chassis # E11001 –
QTY Required: 1
Brake line pipe, 3-way connector to left wheel cylinder. Fits: Chassis # E1001 – E29283
QTY Required: 1
Lever (used); sandblasted and primed; Fits: All Metropolitans.
QTY Required: 1
Top cover, black. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle. Please inquire if you want a different vinyl color.
QTY Required: 1
Clamping plate; Fits: All Metropolitans
QTY Required: 1
Finish plate, front left hand; Fits: All Metropolitans
QTY Required: 1
Bracket, right (used) sandblasted; Fits: Chassis # to E11000
QTY Required: 1
Fender, rear left (used); Fits: All Metropolitans
QTY Required: 1
Finish moulding, up right (used)
QTY Required: 1
Seat spring, right (used) 1 3/8″ rise
QTY Required: 1
Pipe, tank to pump end (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Pillar, generator mounting (used); Fits: Chassis # E11001 –
QTY Required: 1
Grille surround, bottom – stamped steel, triple chorme plated. Better than the original, made by KMC artisans.Fits: 560 Metropolitan
QTY Required: 1
Handbrake hole cover; Fits: All Metropolitans
QTY Required: 1
Hose, heater outlet elbow to heater control valve – rubber; Fits: All Metropolitans
QTY Required: 1
Brace, Lefthand (used), instrument panel to dash assembly
QTY Required: 1
Base, license lamp; Fits: All Metropolitans
QTY Required: 1
Number plate lamp; Fits: All Berkeleys
QTY Required: 1
Piston set, std. 0.04; Fits: 1H Engine Prefix
QTY Required: 1
Plug, crankcase oil gallery; Fits: 1G and 2G prefix engines
QTY Required: 1
Oil seal speedometer gear; Fits: 540 9-41 axle
QTY Required: 1
Connector sleeve for starter switch; Fits: All Metropolitans
QTY Required: 1
Steering arm (used); Fits: Chassis # E57460 –
QTY Required: 1
Repair kit rear wheel cylinders; parts for one axle; Fits: Chassis # E29284 –
QTY Required: 1
‘LUCAS’ wiring ties, set of 5 for wiring harness
QTY Required: 1
Belt moulding, rear right (used); Fits: All Metropolitans
QTY Required: 1
Bracket for carburettor pull back spring (used); Fits: Met Chassis to E10998
QTY Required: 1
Brake line pipe, 3-way connector to left wheel cylinder. Fits: Chassis # E29284 –
QTY Required: 1
Lever (used); sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Single connector for wiring harness installation
QTY Required: 1
Top cover, tan. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle.
QTY Required: 1
Distributor housing (used); Fits: Chassis # to E10998
QTY Required: 1
Vacuum unit; Fits: 540 Metropolitans
QTY Required: 1
Finish plate, rear right hand; Fits: All Metropolitans
QTY Required: 1
Bracket, right (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Fender, rear right (used); Fits: All Metropolitans
QTY Required: 1
Finish moulding, upper left (used)
QTY Required: 1
Cover, master cylinder access hole (floor); Fits: All Metropolitans
QTY Required: 1
Seat spring, right (used) 1 7/8″ rise
QTY Required: 1
Grille surround right – stamped steel, triple chorme plated. Better than the original, made by KMC artisans. Fits: 560 Metropolitan
QTY Required: 1
Idler assembly refurbished (X85) Price includes a $85 core charge that is refunded once we receive your rebuildable core. Fits: to Chassis # E31762
QTY Required: 1
Brace, Righthand (used), instrument panel to dash assembly
QTY Required: 1
Grommet for cable (rubber); Fits: All Metropolitans
QTY Required: 1
License holder, rear (used); Fits: All Metropolitans
QTY Required: 1
Lens, clear – number plate lamp; Fits: All Berkeleys
QTY Required: 1
Screw, banjo union; Fits: 1500 Met Engines
QTY Required: 1
Pressure switch; Fits: All Metropolitans
QTY Required: 1
Pipe, pump end (X), Exchange only – please send us the pipe with fittings to repair.
QTY Required: 1
Piston set, standard; includes rings and pins. Fits: A/C/FNH Engine Prefix
QTY Required: 1
Plug, crankcase oil gallery; Fits: 1H and A/C/FNH prefix engines
QTY Required: 1
Gasket for speedomter pinion bushing; Fits: 540 8-37 axle
QTY Required: 1
Starter switch; Fits: All Metropolitans
QTY Required: 1
Belt moulding, rear left (used); Fits: All Metropolitans
QTY Required: 1
Bracket for carburettor pull back spring; Fits: Met Chassis # E11001-
QTY Required: 1
Brake adjusting wrench – 1/4″ & 5/16″ square ends; Fits: All Metropolitans
QTY Required: 1
Bracket (used) to support the clutch master cylinder; sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Double connector for wiring harness installation
QTY Required: 1
Top cover, off-white. Covers convertible top when it is down. Made-to-order, please allow 1 week production. Shipped with snaps for local installation to properly align with your snap studs on vehicle. Inquire if you want a different vinyl color.
QTY Required: 1
Distributor housing (used); Fits: Chassis # E11001 –
QTY Required: 1
Vacuum unit; Fits: 560 Metropolitans
QTY Required: 1
Finish plate, rear left hand; Fits: All Metropolitans
QTY Required: 1
Bracket, left (used) sandblasted; Fits: Chassis # to E11000
QTY Required: 1
Repair section, rear left fender. Made of 16 gauge 1018 steel; Fits: All Metropolitans
QTY Required: 1
Gasket,for the master cylinder cover ; Fits: All Metropolitans
QTY Required: 1
Seat spring, left (used) 1 3/8″ rise
QTY Required: 1
Grille surround left – stamped steel, triple chorme plated. Better than the original, made by KMC artisans. Fits: 560 Metropolitan
QTY Required: 1
ID plate, “SMITHS” heater; Fits: All Metropolitans
QTY Required: 1
Idler assembly (X65) Price includes a $65 core charge that is refunded once we receive your rebuildable core. Fits: Chassis # E31763 –
QTY Required: 1
Bracket, license plate holder (used); Fits: All Metropolitans
QTY Required: 1
Cover – number plate lamp; Fits: All Berkeleys
QTY Required: 1
Sump , oil reservoir (used); Fits: to Chassis # E11000
QTY Required: 1
Bearing, inner, pinion gear; Fits: 540 Metropolitans
QTY Required: 1
Piston set, std. 0.02; Fits: A/C/FNH Engine Prefix
QTY Required: 1
Gasket for speedomter pinion bushing; Fits: 540 9-41 axle to Chassis # E28705
QTY Required: 1
Return spring for accelerator; Fits: All Metropolitans
QTY Required: 1
Clip, belt moulding (used); Fits: All Metropolitans
QTY Required: 1
Steel pipe with tube nuts from the clutch master cylinder to flexible hose. Fits: Met Chassis # E59048 –
QTY Required: 1
Drive spindle to distributor; Fits: All Metropolitans
QTY Required: 1
Retainer, right (used); Fits: All Hardtop/Saloon Metropolitans
QTY Required: 1
Bracket, left (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Repair panel, front right fender. Made of 16 ga 1018 steel, laser cut. ; Fits: All Metropolitans
QTY Required: 1
Seat spring, left (used) 1 7/8″ rise
QTY Required: 1
Hose, pump to carburettor (X) , Please send in your core to be refurbished.
QTY Required: 1
Motor (X20) F1305; Fits: All Metropolitans
QTY Required: 1
Gasket, idler assembly for cover; Fits: to Chassis # E31762
QTY Required: 1
Grommet for lamp wire; Fits: All Metropolitans; Fits: All Metropolitans
QTY Required: 1
Bezel, chrome. Hand casted, sanded and triple chromed. Made by KMC artisans. Fits: 560 Metropolitan
QTY Required: 1
Gasket – number plate lamp; Fits: All Berkeleys
QTY Required: 1
Sump, oil reservoir (used); Fits: Chassis # E11001 –
QTY Required: 1
Bearing, inner, pinion gear; Fits: 560 Metropolitans
QTY Required: 1
Piston set, std. 0.03; Fits: A/C/FNH Engine Prefix
QTY Required: 1
Plug, screw oil hole; Fits: 1H and A/C/FNH prefix engines
QTY Required: 1
Rotor Not warranted due to inconsistent quality. Fits: All Metropolitans
QTY Required: 1
Signal indicator warning light assembly (fits behind dash); Fits: All Metropolitans
QTY Required: 1
Gasket for speedomter pinion bushing; Fits: Chassis # E28706 –
QTY Required: 1
Stop lamp switch; Fits: All Metropolitans
QTY Required: 1
Screw, banjo for pipe to pump connection
QTY Required: 1
Choke cable assembly with chrome knob; Fits: All Metropolitans
QTY Required: 1
Retainer, left (used); Fits: All Hardtop/Saloon Metropolitans
QTY Required: 1
Repair section, rear right fender. Mde of 16 gauge 1018 steel; Fits: All Metropolitans
QTY Required: 1
Pulley, generator (used); Fits: Chassis # to E10998
QTY Required: 1
Gasket, idler assembly for cover; Fits: Chassis # E31763 –
QTY Required: 1
Clamp, rear license plate; Fits: All Metropolitans; Fits: All Metropolitans
QTY Required: 1
“Nash” Medallion handcrafted by Kip Motor artisans. Fits: 540 Metropolitans
QTY Required: 1
Bulb – number plate lamp; Fits: All Berkeleys
QTY Required: 1
Gasket, sump to cylinder block; Fits: to Chassis # E11000
QTY Required: 1
Bearing, outer, pinion gear; Fits: 540 Metropolitan
QTY Required: 1
Piston set, std. 0.04; Fits: A/C/FNH Engine Prefix
QTY Required: 1
Rotor authentic reproduction. Superior to the cheap aftermarket spares. Made by KMC. Fits: All Metropolitans
QTY Required: 1
Cable, speedometer; Fits: Chassis to # E11000
QTY Required: 1
Spring set (8) for valves; Fits: to Chassis # E11000
QTY Required: 1
Handle – chrome, vent window locking RIGHT HAND; Fits: Metropolitans with vent window
QTY Required: 1
Voltage regulator (control box); Fits: All Metropolitans
QTY Required: 1
Retainer, belt moulding – center; Fits: All Metropolitans
QTY Required: 1
Grommet for starter and mixture cables through dash; Fits: All Metropolitans
QTY Required: 1
Hose, flexible to slave cylinder; Fits: Chassis # E11001 –
QTY Required: 1
Retainer, front right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Repair panel, front left fender. Made of 16 ga 1018 steel, laser cut; Fits: All Metropolitans
QTY Required: 1
Pulley, generator (used); Fits: Chassis # E11001 with 22258 generator
QTY Required: 1
Grommet for main wiring harness to dash through firewall
QTY Required: 1
Headlining, Off White as original British Cream linen weave pattern; made-to-order, please allow 1 week production. Fits: Both 542 and 562 Metropolitans (Hardtops)
QTY Required: 1
Heater assembly referred to as the Weather Eye in Tech manual, (X). Please send in your assembly for refurbishing.; Fits: All Metropolitans
QTY Required: 1
“Hudson” Medallion, handcrafted by Kip Motor artisans. Fits: 540 Metropolitans
QTY Required: 1
Gasket, sump to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Bearing, outer, pinion gear; Fits: 560 Metropolitan
QTY Required: 1
Piston set, std. 0.06; Fits: A/C/FNH Engine Prefix
QTY Required: 1
Slide, right (used) 1 3/8″ rise
QTY Required: 1
Cable, speedometer; Fits: Chassis E11001 –
QTY Required: 1
Tire cover, off white to match convertible top. Piped in off-white or black, please specify. Fits: All Metropolitans
QTY Required: 1
Spring set (8) for valves; Fits: Chassis # E11001 –
QTY Required: 1
Handle – chrome, vent window locking LEFT HAND; Fits: Metropolitans with vent window
QTY Required: 1
Wiper switch (used); Fits: All Metropolitans
QTY Required: 1
Washer, copper for hose joint; Fits: Chassis # E11001 –
QTY Required: 1
Retainer, front left (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finishing clip, right (no longer available); Fits: Chassis # E13620 –
QTY Required: 1
Floor pan, front left. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Pulley, generator; Fits: 560 Metropolitan with 22700 generator
QTY Required: 1
Listing wire, front; Fits: All Metropolitan 542, 562 hardtops
QTY Required: 1
Bracket (used), support for idler assembly; Fits: to Chassis # E31762
QTY Required: 1
“M” Medallion, handcrafted by Kip Motor artisans. Fits: 560 Metropolitan
QTY Required: 1
Mount plate, right (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Drain clip; Fits: All Metropolitans
QTY Required: 1
Oil seal; Fits: All Metropolitans
QTY Required: 1
Plug, oil hole oil filter boss; Fits: All Metropolitans
QTY Required: 1
Ring set only, standard; Fits: 1200 engine
QTY Required: 1
Slide, right (used) 1 7/8″ rise
QTY Required: 1
Plug wire set; Fits: All Metropolitans
QTY Required: 1
Tire cover, black piped in white or black vinyl; please specifiy. Fits: All Metropolitans
QTY Required: 1
Pivot bracket – chrome, vent window handle RIGHT HAND; Fits: All Metropolitans with vent window
QTY Required: 1
Knob, wiper switch chrome, made by KMC artisans; Fits: All Metropolitans
QTY Required: 1
Bushing for clutch withdrawal lever; Fits: 560 Metropolitans
QTY Required: 1
Retainer, center right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finishing clip, left (no longer available); Fits: Chassis # E13620 –
QTY Required: 1
Floor pan, front right. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Fan, generator; Fits: 22258 generator
QTY Required: 1
Bracket (used); Fits: Chassis # E31763 – E57459
QTY Required: 1
Plate, backing for Nash and Hudson medallions. Fits: 540 Metropolitans
QTY Required: 1
Mount plate, right (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Plug, drain (used); Fits: to Chassis # E11000
QTY Required: 1
Dust cover (used); Fits: All Metropolitans
QTY Required: 1
Ring set only, standard; Fits: 1500 engine
QTY Required: 1
Seal plate for radiator pipes; Fits: All Metropolitans
QTY Required: 1
Slide, left (used) 1 3/8″ rise
QTY Required: 1
Gasket – no longer available
QTY Required: 1
Vacuum tube with fuel trap; Fits: All Metropolitans
QTY Required: 1
Pivot bracket-chrome, vent window handle LEFT HAND; Fits: All Metropolitans with vent window
QTY Required: 1
Bolt for clutch withdrawal lever: Fits: 560 Metropolitans
QTY Required: 1
Retainer, center left (used); Fits: All convertible Metropolitans
QTY Required: 1
Finish moulding, right (used); Fits: All Metropolitans
QTY Required: 1
Floor pan, rear left. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Fan, generator; Fits: 22700 generator
QTY Required: 1
Bracket (used); Fits: Chassis # E57460 –
QTY Required: 1
Plate, backing for “M” medallion; Fits: 560 Metropolitan
QTY Required: 1
Mount plate, left (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Plug, drain ; Fits: Chassis # E11001 –
QTY Required: 1
Pin set only, standard; Fits: 1500 engine
QTY Required: 1
Nut, flange to pinion; Fits: 560 Metropolitans
QTY Required: 1
Slide, left (used) 1 7/8″ rise
QTY Required: 1
Dust boot for clutch withdrawal lever; Fits: Chassis #E11001 –
QTY Required: 1
Retainer, rear right (used); Fits: All Convertible Metropolitans
QTY Required: 1
Finish moulding, left (used); Fits: All Metropolitans
QTY Required: 1
Floor pan, rear right. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Adjusting link, generator; Fits: All Metropolitans
QTY Required: 1
Dust seal; Fits: to Chassis # E31762
QTY Required: 1
Mount plate, left (used) sandblasted; Fits: Chassis # #11001 –
QTY Required: 1
Pin set – std. 0.001; Fits: 1500 engine
QTY Required: 1
Lockwasher, nut; Fits: All Metropolitans
QTY Required: 1
Speedometer, KPH – new old stock “Smiths” (odometer not included); Fits: All Metropolitans
QTY Required: 1
Vent, breather assembly for axle case; Fits: All Metropolitans
QTY Required: 1
Retainer, rear left (used); Fits: All Convertible Metropolitans
QTY Required: 1
Fan blade (used); Fits: Chassis # to E10998
QTY Required: 1
Clip, finish moulding – new; Fits: All Metropolitans
QTY Required: 1
Front valance (grille panel assembly – radiator lower). Sorry, no longer available.
QTY Required: 1
Dust seal; Fits: Chassis # E31763 – E57459
QTY Required: 1
Dipstick, rod oil dipper (used); Fits: to Chassis # E11000
QTY Required: 1
Pin set – std. 0.003; Fits: 1500 engine
QTY Required: 1
Speedometer, MPH – new old stock “Smiths” (fuel guage not included); Fits: All Metropolitans
QTY Required: 1
Front valance (grille panel assembly – radiator lower). Sorry, no longer available.
QTY Required: 1
Idler arm (used), lever; Fits: to Chassis # E31762
QTY Required: 1
Main Bearing set, std. Fits: to Chassis # E11000
QTY Required: 1
Dipstick, rod oil dipper (used); Fits: Chassis # E11001 –
QTY Required: 1
Cushion, rear – covered dense foam with hold down straps/snaps. Originally, sewn in Bedford Stripe piped in beige vinyl. Fits: 540 Metropolitans. Can sew to your specifications; please inquire. Sorry, no longer available.
QTY Required: 1
Fan belt; Fits: Chassis # to E10998
QTY Required: 1
Hinge Pillar repair section – left. Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Idler arm (used), lever; Fits: Chassis # E31763 – E57459
QTY Required: 1
Main Bearing set, std. 0.002; Fits: to Chassis # E11000
QTY Required: 1
Tube, oil dipper rod; Fits: Chassis # E11001 –
QTY Required: 1
Cushion, rear – vinyl covered dense foam with hold down straps/snaps. Originally, sewn in off-white vinyl. Fits: 560 Metropolitan NO vent window. Can sew to your specifications; please inquire. Sorry, no longer available.
QTY Required: 1
Shim, front engine mount; Fits: to Chassis # E11000
QTY Required: 1
Door handle, exterior left. High quality, hand casted, sanded, then triple chromed handle. Made by KMC in Texas. Fits: Chassis # E1001 – E48847
QTY Required: 1
Fan belt; Fits: Chassis # E11001 –
QTY Required: 1
Hinge Pillar repair section – right. Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Idler arm (used), lever; Fits: Chassis # E57460 –
QTY Required: 1
Main Bearing set, std. 0.01; Fits: to Chassis # E11000
QTY Required: 1
Dust cap, oil dipper rod; Fits: Chassis # E11001 –
QTY Required: 1
Cushion, rear – vinyl covered dense foam with hold down straps/snaps. Originally, sewn in black vinyl piped in white. Fits: 560 Metropolitan WITH vent window. Can sew to your specifications, please inquire. Sorry, no longer available.
QTY Required: 1
Shim, front engine mount; Fits: Chassis # #11001 –
QTY Required: 1
Slave cylinder; Fits: Chassis # E110001 – E59047
QTY Required: 1
Urethane auto glass sealant, 10 oz (black) (for finishing front & rear windscreen installations); Fits: All Metropolitans
QTY Required: 1
Fits: Chassis # E1001 – E48847
QTY Required: 1
Door seal super weatherstrip adhesive, 5 oz (black)
QTY Required: 1
Front crossmember (used) sandblasted
QTY Required: 1
Hood (used) Sorry, no longer available.
QTY Required: 1
Main Bearing set, std. 0.02; Fits: to Chassis # E11000
QTY Required: 1
Wood frame, rear back; Fits: All Metropolitans
QTY Required: 1
Rocker shaft, authentic reproduction made by KMC ; Fits: to Chassis # E11000
QTY Required: 1
Slave cylinder; Fits: Chassis # E59048 –
QTY Required: 1
Track rod end, set (2); male thread
QTY Required: 1
Brace, crossmember extension – right (used) sandblasted
QTY Required: 1
Hood (used)
QTY Required: 1
Main Bearing set, std. 0.03; Fits: to Chassis # E11000
QTY Required: 1
Padding, rear back; Fits: All Metropolitans
QTY Required: 1
Rocker shaft; Fits: Chassis # E11001 –
QTY Required: 1
Repair kit, slave cylinder; Fits: All Metropolitans
QTY Required: 1
Track rod end, set (2); female thread 560 Metropolitan
QTY Required: 1
Brace, crossmemeber extension – left (used) sandblasted
QTY Required: 1
Bonnet hinge, left (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std. 0.04; Fits: to Chassis # E11000
QTY Required: 1
Lock with key that secures rear back to trunk well; Fits: All Metropolitans
QTY Required: 1
Plug, valve rocker shaft; Fits: All Metropolitans
QTY Required: 1
Bleed screw, slave cylinder; Fits: Chassis #E11001 –
QTY Required: 1
Bonnet hinge, right (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std.; Fits: Chassis # E11001 –
QTY Required: 1
Rear crossmember gearbox (used) sandblasted; Fits: to Chassis # E11000
QTY Required: 1
Bracket, tapped rocker shaft (used); Fits: to Chassis # E11000
QTY Required: 1
Pushrod, slave cylinder; Fits: All Metropolitans
QTY Required: 1
Trunk lid trim, inside lid; Fits: All Metropolitans
QTY Required: 1
Insulation panel, under dash/firewall; Fits: All Metropolitans
QTY Required: 1
Bonnet prop assembly (used); Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std. 0.01; Fits: Chassis # E11001 –
QTY Required: 1
Rear crossmember gearbox, authentic reproduction by Kip Motor Co. Fits: Chassis # E11001 –
QTY Required: 1
Bracket, tapped; Fits: Chassis # E11001 –
QTY Required: 1
Pin, push rod to clutch withdrawal lever; Fits: Chassis #E11001 –
QTY Required: 1
Gasket set, door handle; Fits: Chassis # E1001 – E48847
QTY Required: 1
Grille, hood scoop chrome, authentic reproduction made by Kip Motor Co; Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std. 0.02; Fits: Chassis # E11001 –
QTY Required: 1
Gasket set, door handle; Fits: Chassis # E48848 –
QTY Required: 1
Drain tap, cylinder block; Fits: All Metropolitans
QTY Required: 1
Lock Pillar repair section – left. Made of 16 ga 1018 steel, made-to-order; Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std. 0.03; Fits: Chassis # E11001 –
QTY Required: 1
Rebound, lower mounting (rubber)
QTY Required: 1
Steering wheel (X150) Price includes a $150 core charge that is refunded once we receive your rebuildable core. To create a refurbished steering wheel, we remove the old, cracked pastic from the rim and sandblast wheel down to bare metal, cast on a new urethane rim, then finish off the hub and spokes with a durable high gloss urethane black paint for that factory fresh look and feel. Fits: All Metropolitans
QTY Required: 1
Hog ring pliers; Fits: All Metropolitans
QTY Required: 1
Lock Pillar repair section – right. Made of 16 ga 1018 steel, made-to-order; Fits: All Metropolitans
QTY Required: 1
Main Bearing set, std. 0.04; Fits: Chassis # E11001 –
QTY Required: 1
Shim, rear gearbox mounting crossmember
QTY Required: 1
Lockwasher, steering wheel nut; Fits: All Metropolitans
QTY Required: 1
Hog rings, box; Fits: All Metropolitans
QTY Required: 1
Mounting plate (used), front; Fits: Chassis # to E11000
QTY Required: 1
Repair section, front seat riser. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Nut, steering wheel; Fits: All Metropolitans
QTY Required: 1
Mounting plate (used), front; Fits: Chassis # E11001 –
QTY Required: 1
Repair section, handbrake bracket. Made-to-order; please allow 4 to 6 weeks production; Fits: All Metropolitans
QTY Required: 1
Grommet, steering column and gear shift rod through floorboard; Fits: All Metropolitans
QTY Required: 1
Gasket, mounting plate to cylinder block; Fits: Chassis # E11001 –
QTY Required: 1
Roof assembly (used); Fits: All Hardtop Metropolitans (542/562)
QTY Required: 1
Cushion, steering column upper support – rubber; Fits: All Metropolitans
QTY Required: 1
Retainer, steering column cushion; Fits: All Metropolitans
QTY Required: 1
Striker plate, left (used)
QTY Required: 1
Sill Assembly, left inner reinforcement. Made of 16 ga 1018 steel, laser cut and folded; Fits: All Metropolitans
QTY Required: 1
Striker plate, right (used)
QTY Required: 1
Sill Assembly, right inner reinforcment. Made of 16 ga 1018 steel, laser cut and folded; Fits: All Metropolitans
QTY Required: 1
Striker plate, left
QTY Required: 1
Striker plate, right
QTY Required: 1
Bumper, center sometimes referred to as an axle stop
QTY Required: 1
Locating screw rocker shaft; Fits: Chassis # E11001 –
QTY Required: 1
Trunk lid (used); Fits: All Metropolitans
QTY Required: 1
Locating plate for rocker shaft screw; Fits: Chassis # E11001 –
QTY Required: 1
Windshield pillar repair section – left side (does not come with pillar). Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Windshield pillar repair section – right side (does not come with pillar). Made of 16 ga 1018 steel; Fits: All Metropolitans
QTY Required: 1
Head gasket; Fits: to Chassis # E11000
QTY Required: 1
Head gasket; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing set, std.; Fits: to Chassis # E11000
QTY Required: 1
Rod Bearing set, 0.01; Fits: to Chassis # E11000
QTY Required: 1
Steering lever, Righthand (used); Fits: to Chassis # E27427
QTY Required: 1
Rod Bearing set, 0.02; Fits: to Chassis # E11000
QTY Required: 1
Steering lever, Righthand (used); Fits: Chassis # E27428 –
QTY Required: 1
Rod Bearing set, 0.03; Fits: to Chassis # E11000
QTY Required: 1
Steering lever, Lefthand (used); Fits: to Chassis # E27427
QTY Required: 1
Rod Bearing set, 0.04; Fits: to Chassis # E11000
QTY Required: 1
Steering lever, Lefthand (used); Fits: Chassis # E27428 –
QTY Required: 1
Rod Bearing set, standard; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing set, 0.01; Fits: Chassis # E11001 –
QTY Required: 1
Plug (used), thermal transmitter boss; Fits: to Chassis # E11000
QTY Required: 1
Rod Bearing set, 0.02; Fits: Chassis # E11001 –
QTY Required: 1
Plug (used), thermal transmitter boss; Fits: Chassis # E11001 –
QTY Required: 1
Washer, for plug; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing set, 0.03; Fits: Chassis # E11001 –
QTY Required: 1
Rod Bearing set, 0.04; Fits: Chassis # E11001 –
QTY Required: 1
Valve cover (used); Fits: to Chassis # E11000
QTY Required: 1
Crankshaft (X195) Price includes $195 core chargethat is refunded once we receive your rebuildable core. Reground when ordered; production time 1-2 weeks.
QTY Required: 1
Valve cover (used), sandblasted and primed; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft (X195) Price includes $195 core charge that is refunded once we receive your rebuildable core. Reground when ordered; production time 1-2 weeks.
QTY Required: 1
Valve cover (used), not sandblasted; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft (X195) Price includes $195 core charge that is refunded once we receive your rebuildable core. Regound when ordered; production time 1-2 weeks.
QTY Required: 1
Cap & cable for oil filler; Fits: All Metropolitans
QTY Required: 1
Pilot bushing 1st motion shaft; Fits: All Metropolitans
QTY Required: 1
Valve cover gasket; Fits: to Chassis # E11000
QTY Required: 1
Valve cover gasket; Fits: Chassis # E11001 –
QTY Required: 1
Crankshaft gear; Fits: All Metropolitans
QTY Required: 1
Elbow (used), heater outlet to cylinder head; Fits: All Metropolitans
QTY Required: 1
Packing washer for gear key; Fits: All Metropolitans
QTY Required: 1
Gasket, heater elbow to cylinder head
QTY Required: 1
Oil thrower, front; Fits: All Metropolitans
QTY Required: 1
Return pipe (used) – copper; Fits: to Chassis # E11000
QTY Required: 1
Return pipe (used) – copper; Fits: Chassis # E11001 –
QTY Required: 1
Thrust Bearing set; Fits: to Chassis # E11000
QTY Required: 1
Thrust Bearing set; Fits: Chassis # E11001 –
QTY Required: 1
Camshaft (X95). Price includes a $95 core charge that is refunded once we receive your rebuildable core. Reground and polished camshaft is ready to install; Fits: to Chassis # E11000
QTY Required: 1
Gasket, thermostat housing
QTY Required: 1
Camshaft (X50). Price includes a $50 core charge that is refunded once we receive your rebuildable core. Reground and polished camshaft is ready to install; Fits: Chassis # E11001 –
QTY Required: 1
Thermostat, 160 degrees
QTY Required: 1
Camshaft bearing set; Fits: to Chassis # E11000
QTY Required: 1
Thermostat, 180 degrees
QTY Required: 1
Camshaft bearing set; Fits: Chassis # E11001 –
QTY Required: 1
Locating plate, camshaft; Fits: Chassis # E11001 –
QTY Required: 1
Camshaft gear; Fits: Chassis # E11001 –
QTY Required: 1
Key, camshaft gear; Fits: Chassis # E11001 –
QTY Required: 1
Nut, camshaft gear; Fits: Chassis # E11001 –
QTY Required: 1
Locktab, camshaft gear; Fits: Chassis # E11001 –
QTY Required: 1
Timing chain; Fits: All Metropolitans
QTY Required: 1
Tensioner with backplate; Fits: Chassis # E11001 –
QTY Required: 1
Locktab for tensioner; Fits: Chassis # E11001 –
QTY Required: 1
Flywheel (X85) Refurbished, ready to install. Price includes a $85 core charge that is refunded once we receive your rebuildable core. Fits: 1G prefix engines
QTY Required: 1
Flywheel (X75) refurbished ready to install. Price includes a $75 core charge that is refunded once we receive your rebuildable core. Fits: 2G prefix engines
QTY Required: 1
Flywheel (X65) refurbished ready to install. Price includes a $65 core charge that is refunded once we receive your rebuildable core. Fits: 1500 engines
QTY Required: 1
Ring gear, starter; Fits: to Chassis # E11000
QTY Required: 1
Ring gear, starter; Fits: Chassis # E11001 –
QTY Required: 1
Pulley, crankshaft (used); Fits: Engine # to 2G14667
QTY Required: 1
Pulley, crankshaft; Fits: Engine # 2G14668 –
QTY Required: 1
Locktab, crankshaft pulley; Fits: All Metropolitans
QTY Required: 1
Starting jaw nut for crankshaft (used); Fits: to Chassis # E11000
QTY Required: 1
Starting jaw nut for crankshaft ; Fits: Chassis # E11001 –
QTY Required: 1
Plastigauge, sleeve (critical for measuring main and rod bearing clearances during engine assembly)
QTY Required: 1
#105 Motor Assembly Lube, 10 oz (Oil soluble white grease for general engine assembly)
QTY Required: 1